UPDATE: LOHAS has updated the RGBW bulb to use PWM now and includes a fifth channel of warm white. You know you have the new bulb by the RX/TX pads are missing under the diffuser and the ESP module is sticking up in between the LED board. You will need to use the RGB+CCT YAML for ESPHome for these.
The LOHAS LED Bulbs utilize dual channels of warm white and cool white LEDs on the MY9231/MY9291 LED drivers. We show in ESPHome how to solve this issue with a custom component. All of the sample configurations used in the video can be found at the GitHub link below. The Anoop bulb is a dual channel PWM light shown in Tasmota. We also show how to easily configure the device using the new copy and paste templates of Tasmota.
Video Demostration and Setup - https://www.youtube.com/watch?v=fTb6n6flJIw
LOHAS Color
LOHAS CW/WW LED
LOHAS 100w Equiv
Anoopsyche CW/WW LED
Amazon US Link
LOHAS ESPHome Configurations and CopyChan component are located in this GitHub Repo.
Home Assistant Sample MQTT Configurations
Tuya Convert Process 2.0 - https://www.youtube.com/watch?v=dyUyewiKpRA