TV CEC remote control support for Emulation Station (included in RetroPie)
It will automatically map your retroarch keyboard config to the remote control buttons. Ensure you pick a key for all available options ( See Supported Keyboard Keys Below )
It will not act on remote button presses when kodi or retroarch is running and will act as soon as ES returns or starts.
ES <-> TV Remote
A <-> SELECT or RED
B <-> EXIT or GREEN
UP <-> UP
DOWN <-> DOWN
LEFT <-> LEFT
RIGHT <-> RIGHT
START <-> FAST FORWARD or BLUE
SELECT <-> REWIND OR YELLOW
It depends on the cec-utils package and also the python-uinput package which contains the library and the udev rules at
/etc/udev/rules.d/40-uinput.rules.
Both cec-utils and python-uinput are in the repositories.
The 40-uinput.rules file should look like the following
ACTION=="add|change", KERNEL=="event[0-9]*", ENV{ID_VENDOR_ID}=="012a", ENV{ID_MODEL_ID}=="034b",
ENV{ID_INPUT_KEYBOARD}="1", ENV{ID_INPUT_TABLET}="1"SUBSYSTEM=="input", ATTRS{name}=="python-uinput",
ENV{ID_INPUT_KEYBOARD}="1"KERNEL=="uinput", MODE:="0666" You must first create the uinput group
sudo addgroup uinput
Then add the pi user to the uinput group
sudo adduser pi uinput
Note: It was developed and tested on a pi3 with Retropie 4.1 with kodi installed in the ports section of retropie
To make sure it will work you should run the script as a non root user.
First make the script executable (assuming your in the same directory as the file)
chmod u+x es-cec-input.py
then run it with
./es-cec-input.py
If you see no output then you can try your TV remote with the buttons in the Button section above. If it works then proceed to the next section
If you see output it will exit and tell you the key which is unsupported and a list of the supported keys.
Ensure all your keys are supported and try again until you get no output.
To start on boot, add to user's crontab.
crontab -e
Add the line,
@reboot nohup /home/pi/PATH/TO/THE/SCRIPT/es-cec-input.py
Note: You must set up your keyboard in Emulation Station first (pick a key for all options!) or the script will not work
As keys need to be mapped from retroarch.cfg supported keys to corresponding uinput supported keys not all the keys are available. However most are supported, as seen below
Letters ("a" to "z"), left, right, up, down, enter, kp_enter, tab, insert, del, end, home, rshift, shift, ctrl, alt, space, escape, kp_plus, kp_minus, f1, f2, f3, f4, f5, f6, f7, f8, f9, f10, f11, f12, num0, num1, num2, num3, num4, num5, num6, num7, num8, num9, pageup, pagedown, keypad0, keypad1, keypad2, keypad3, keypad4, keypad5, keypad6, keypad7, keypad8, keypad9, period, capslock, numlock, backspace, scroll_lock, backquote, pause, comma, minus, slash, semicolon, equals, backslash, kp_period, kp_equals, rctrl, ralt
(where "kp_"# is for keypad keys)