search

dingusdk / ha-dukaone

HA integration for the Dukaone S6W ventilation heat exchanger
GNU General Public License v3.0
28 stars 11 forks source link

readme

Home Assistant Duka One Integration

hacs_badge

This is a Duka One custom component for Home Assistant.

To use it, the easist way is to install it with HACS. Add this repo as a Custom Repository in HACS and install it.

Without HACS you will have to place the custom_components folder in your HA configuration folder.

To add a duka one to Home assistant go to configuration|Integrations and click the "+" in the lower right corner. Then find the "Duka One" in the list.

In the dialog enter a name for the device and the device id. You can find the device id in the mobile app for Duka One. If you know the IP of the device you can enter it. Or you can enter the broardcast address of your subnet (like 192.168.0.255). You can also leave it empty and the integration will try to broadcast and find the device. (Note this does not always works - depending on you network and Home Assistant setup).

License

HA-DukeOne is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.

HA-DukeOne is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with DukeOne. If not, see http://www.gnu.org/licenses/.