usbipd-win

Windows software for sharing locally connected USB devices to other machines, including Hyper-V guests and WSL 2.

How to install

This software requires Microsoft Windows 10 (x64 only) / Microsoft Windows Server 2019, version 1809 or newer; it does not depend on any other software.

Run the installer (.msi) from the latest release on the Windows machine where your USB device is connected.

Alternatively, use the Windows Package Manager:

winget install usbipd

This will install:

A service called usbipd (display name: USBIP Device Host).\ You can check the status of this service using the Services app from Windows.
A command line tool usbipd.\ The location of this tool will be added to the PATH environment variable.
A firewall rule called usbipd to allow all local subnets to connect to the service.\ You can modify this firewall rule to fine tune access control.

[!NOTE] If you are using a third-party firewall, you may have to reconfigure it to allow incoming connections on TCP port 3240.

How to use

Share Devices

By default devices are not shared with USBIP clients. To lookup and share devices, run the following commands with administrator privileges:

usbipd --help
usbipd list
usbipd bind --busid=<BUSID>

Sharing a device is persistent; it survives reboots.

[!TIP] See the wiki for a list of tested devices.

Connecting Devices

Attaching devices to a client is non-persistent. You will have to re-attach after a reboot, or when the device resets or is physically unplugged/replugged.

Non-WSL 2

From another (possibly virtual) machine running Linux, use the usbip client-side tool:

usbip list --remote=<HOST>
sudo usbip attach --remote=<HOST> --busid=<BUSID>

[!NOTE] Client-side tooling exists for other operating systems such as Microsoft Windows, but not as part of this project.

WSL 2

[!TIP] In case you have used usbipd with WSL 2 before, the following has changed since version 4.0.0:

You have to share the device using usbipd bind first.

You no longer have to install any client-side tooling.

You no longer have to specify a specific distribution.

The syntax for the command to attach has changed slightly.

You can attach the device from within Windows with the following command, which does not require administrator privileges:

usbipd attach --wsl --busid=<BUSID>

[!TIP] See the wiki on how to add drivers for USB devices that are not supported by the default WSL 2 kernel.

GUI

For those who prefer a GUI over a CLI, the following is available:

Andrew Leech has created a Windows Desktop Application.
Dushan Balisson has created a Visual Studio Code Extension.

How to remove

Uninstall via Add/Remove Programs or via Settings/Apps.