eBus USB Adapter <https://www.mikrocontroller.net/topic/346833>
_ebusd daemon <https://github.com/john30/ebusd/wiki>
_Copy the config file 3c.csv
to /home/pi/encon/3c.csv
on the Raspberry Pi.
Open a shell and start the ebusd daemon (assume that the eBus USB Adapter is connected to
/dev/ttyUSB1
):
.. code-block:: shell-session
$ ebusd -f --logareas bus --loglevel info -d /dev/ttyUSB1 -c /home/pi/ 2017-02-10 17:51:23.365 [bus notice] signal acquired 2017-02-10 17:51:23.968 [bus notice] new master 37, master count
Open a second shell and use the ebusd ebusctl <https://github.com/john30/ebusd/wiki/5.-Tools#ebusctl>
_
command-line tool to read or write the defined parameters of the Brink Renovent Excellent 300.
For example:
.. code-block:: shell-session
$ ebusctl read Aussenlufttemperatur 9.6 $ $ ebusctl read BetriebsstundenTotal 15155;32768;32767;1;0 $ $ ebusctl read SoftwareVersion S1.05.07 0004
The shell script test.sh
can be used to query all defined parameters in 3c.csv
:
.. code-block:: shell-session
$ ./test.sh done
SoftwareVersion S1.05.07 0004
Press any key to continue... Ventilatorbetrieb Feuchteschutz
Press any key to continue... TatsaechlicheDrehzahlZuluft 1056
...
Note: Another config file for the Brink Renovent Sky 300 from
paddyx <https://www.mikrocontroller.net/user/show/paddyx>
(Patrick K.)
can be found here <https://www.mikrocontroller.net/attachment/315753/3c.csv>
.
It should be also compatible with the Brink Renovent Excellent 300.