A Home Assistant Integration to connect to your NRGKick device.
To be able to setup this integration, you need to have the IP address of the NRGKick and a UUID or the Serial Number.
Note down the last 7 numbers of the NRGKick's serial number before the 'SxDx'. With this number, you can configure the HA Integration.
NOTE: If you configured a PIN code when you first configured the NRGKick app on your phone, you will need to use that PIN code instead of the 7 digits serial number.
The setup phase will create a new unique UUID to be used for the NRGKick Integration in HA.
This is the UUID which the NRGKick Android app uses to authenticate with your NRGKick device.
The easiest way is to start a tcpdump capture of the traffic from your phone to the NRGKick. Open that capture in wireshark with the protobuf_websocket.lua plugin (https://github.com/dupondje/nrgkick-proto) enabled. And then you can easily find the UUID that is used.