issues
search
eagletrt
/
handcart-hw
🛒 Hardware for Fenice's charging handcart
1
stars
1
forks
source link
issues
Newest
Newest
Most commented
Recently updated
Oldest
Least commented
Least recently updated
PON_CONTROL GPIO and SD_CONTROL GPIO are inverted in schematic
#21
mattebit
opened
3 months ago
0
New charger PON needs 24V not 12V
#20
mattebit
opened
3 months ago
0
Buttons pull-up 3v3 not connected to anything
#19
mattebit
opened
4 months ago
0
Missing reset pull-up on MCP2515
#18
Kirseline
opened
6 months ago
0
J30 connector interference with microSD card of raspi
#17
mattebit
opened
6 months ago
0
Connector RS232 (J26) not fitting between the other ones
#16
mattebit
closed
3 months ago
0
GND pads on the board are not connected to GND
#15
mattebit
opened
6 months ago
0
RASP_PON_CHARGER label controls the discharge relay, not the BRUSA PON
#14
mattebit
opened
7 months ago
0
Review
#13
thomasnonis
opened
9 months ago
0
schematic review
#12
thomasnonis
closed
9 months ago
1
Pensare a come integrare il display e il raspi nella scheda nuova
#11
mattebit
closed
7 months ago
0
Put the BMS connector directly on the PCB instead of having molex->cable->panel connector
#10
mattebit
closed
7 months ago
0
Add a RS232 connector or change the one already present
#9
mattebit
closed
7 months ago
0
Move the BMS connector, too close to shutdown relay K1, clip is not easy to press
#8
mattebit
closed
7 months ago
0
Added some hardware/ wiring documentation
#7
mattebit
closed
1 year ago
0
LEDs logic is inverted
#6
volpx
closed
7 months ago
0
Add LED support
#5
mattebit
closed
7 months ago
2
SD relay coil has to be powered in a different way
#4
mattebit
closed
7 months ago
0
net names not updated in PCB view
#3
mattebit
closed
7 months ago
0
Board v2 problems
#2
volpx
closed
7 months ago
2
Move to kicad-eagle-library all the components
#1
volpx
closed
7 months ago
1