This repository contains a build environment for building 4diac FORTE, the run-time engine of the 4diac IEC 61499 implementation. Part of its workflow is code generation and recompilation of 4diac FORTE, and this environment provides the means to do this with as little effort as possible.
Furthermore, you can manage multiple builds for multiple target platforms. As of this writing, it works on Linux and Windows hosts. There should be no fundamental issues getting this to work on macOS, but no one did so. Supported targets are Linux (x86, ARM, MIPS, …) and Windows as well; again macOS should be easy to add, others might need some more work.
Cross-compilation is built-in: you can generate binaries for all supported platforms on a single build host.
The 4diac FORTE executable built by this build environment will have all optional features enabled: OPC-UA, MQTT, modbus, and with an extra setup step also openPOWERLINK. It does not enable platform-specific features like OPC (no -UA) by default, but different builds can have different target-specific configuration options.
All resulting executables will be statically linked, so there is nothing to deploy beyond the actual executable file, and it will not depend on any system packages/features. Exception: Windows targets will depend on system DLLs that probably come with Windows since XP, maybe even earlier. Full-featured executable size is around 4MB, this varies slightly across targets.
The easiest way to install 4diac-fbe is through an official release: Check out
the release branch of 4diac-fbe and copy either scripts/compile.sh or
scripts/compile.cmd to the toplevel directory. That's all.
IMPORTANT NOTE for Windows users: By default, Windows has a rather short file
name length limit. It is therefore recommended to use an installation
directory close to the root of your drive, like D:\4diac-fbe. Also, avoid
a path containing whitespace.
The first time you run the compile script, the build environment will be set
up by securely downloading and installing a binary release of
4diac-toolchains. If cross-compiling 4diac FORTE for a new target for the
first time, the build environment will download an appropriate cross-compiler
from the current 4diac-toolchains release.
If you run this from the git release branch, simply update the repo and all
subrepositories in place. In case there were significant toolchain updates,
run toolchains/etc/bootstrap/clean.sh to force downloading a current
toolchain release.
Builds are executed by ./compile.sh. For convenience, a Windows
compile.cmd allows single-doubleclick-builds with no console interaction
on Windows. If run in this way, all configurations are built (see below). The
final binaries will be created at build/<config-name>/output/bin.
In order to start over (i.e., to rebuild everything from scratch), delete
subdirectory build. This should never be needed for simple code or
configuration changes. However, if you change library recipes in subdirectory
dependencies, then such a clean restart may be neccessary.
You can also build executables outside the 4diac-fbe directory. In your
desired target directory, create a subdirectory configurations just like
the one in 4diac-fbe and call compile.sh/compile.cmd with your target
directory as the current working directory. This will create the build
directory in this location instead of the 4diac-fbe directory, allowing you
to reuse a single 4diac-fbe installation for multiple projects. If you want
to use a custom 4diac-forte source tree or custom dependencies, you can add
4diac-forte and dependencies subdirectories as needed, which will
override the default code shipped with 4diac-fbe.
By default, the build script will build 4diac FORTE for all configurations present in
subdirectory configurations. Every time the script is called, it will
update all builds with the exact same configuration. The resulting executables
are located in subdirectory build/<config-name>/output.
You may customize builds by copying and modifying the default configuration file
configurations/native-toolchain.txt. By default, all configurations present
in that directory will be built. To temporarily disable a configuration, rename
it so that it does not end in .txt anymore.
If you want to build just a single configuration, specify its base name on the
command line. Example: ./compile.sh native-toolchain only builds the
default version configured through configurations/native-toolchain.txt.
In order to manage complex sets of configurations, you can organize them in
subdirectories. Configurations in a subdirectory will not be built by default.
To process an entire subdirectory instead of the default set of configurations,
specify its name on the command line, e.g. ./compile.sh configurations/test.
Note that configuration names must still be unique, even when separated into
different directories (i.e. no two files with the same name in different
configuration directories).
Look at the default examples configurations/native-toolchain.txt and
configurations/debug.txt for a basic configuration example. The include
file configuration/inc/minimal.txt lists all available options with short
comments. A useful almost-full-featured configuration is provided in
configuration/inc/default.txt.
You can select a cross-compiled build by setting ARCH in the build
configuration file (see above). If cross-compiling 4diac FORTE for a new
target architecture for the first time, the build environment will download
an appropriate cross-compiler from the current 4diac-toolchains release.
See toolchains/etc/crosscompilers.sha256 for a list of pre-built
crosscompilers for the current release.
When designing new Basic Function Blocks, Composite Function Blocks or Service Function Blocks, the runtime has to be re-compiled to include code generated by 4DIAC-IDE. This is the original reason this build system was created.
To add your own blocks, place the code generated by 4DIAC-IDE into
Modules/EclipseGeneratedFBs/generated/. During the next build, it will be
moved into Modules/EclipseGeneratedFBs/edited/, where you can edit it as you
like. Do not edit it while it is in .../generated/; run a build first, then
edit, then rebuild!
When you export code into .../generated/ again, the build system will make
sure that your changes will not be overwritten. Most of the time, it will keep
them perfectly intact; if it can't do so automatically, the build will abort and
tell you how to resolve the situation manually.
If you write custom 4diac FORTE modules, put them into their own subdirectories
below modules. You can configure a different external modules directory
by using the FORTE_EXTERNAL_MODULES_DIRECTORY configuration option.
You can place the type definition files for 4diac IDE into subdirectory
types. The idea is that you copy the contents of the types directory
into new 4diac IDE projects to get access to all custom modules.
The git repository has been set up to ignore all modules by default. If you
want to add modules to a local branch or fork, put the following .gitignore
file into your module directory:
!*That way you can selectively manage modules in subrepos or local branches and leave other modules unmanaged as needed.
If your code has additional dependencies, put them as cget recipes into
subdirectory dependencies/recipes, then add the package name to the DEPS
setting in the build configuration file (see above). In the configuration file,
you can also add any additional CMake settings required for your code, for
example additional compiler flags in EXTRA_COMPILER_FLAGS or additional
dependency packages in DEPS. See configurations/native-toolchain.txt
for some common examples.
For well-known external libraries, you might find cget recipes at
https://github.com/pfultz2/cget-recipes/tree/master/recipes/ -- but be aware
that some of these will need manual adaptions for static linking.
If you have to use pre-built external libraries (e.g. due to proprietary code or
huge external packages that take a lot of effort to build), you will need a
toolchain based on the GNU C library instead of the default MUSL-based
toolchains. These contain -gnu in their name and support dynamic linking,
but the drawback is more complicated distribution. The build system tries to
create a self-contained bin directory containing all dependency files, but
the result still might not be sufficient to run on a different system. This
depends on many details, you have been warned. Avoid it if you can.
If you have unexplainable compiler errors or missing include files or things
like that, you can use the option ./compile.sh -v ... to force the build to
be single-threaded and output the individual compiler command lines. This helps
you to get more readable error outpu and check that all appropriate search paths
and compiler options have been set. NOTE: you must delete the build directory
build/<config-name>/ every time you switch between verbose builds and normal
builds!