Efficient set similarity search algorithms in Python. For even better performance see the Go Implementation.
Let's say we have a database of users and the books they have read. Assume that we want to recommend "friends" for each user, and the "friends" must have read very similar set of books as the user have. We can model this as a set similarity search problem, by representing each user's books as a set:
Alice: {"Anna Karenina", "War and Peace", "The Chameleon", ...}
Bob: {"Lolita", "The Metamorphosis", "The Judgement", ...}
Joey: {"Anna Karenina", "The Chameleon" ...}
A popular way to measure the similarity between two sets is Jaccard similarity, which gives a fractional score between 0 and 1.0.
There are two versions of set similarity search problem, both can be defined given a collection of sets, a similarity function and a threshold:
Both versions of the problem can be very computationally expensive as the collection can be large and the set sizes can be large. The simple brute-force algorithm is O(n^2) for (1) and O(n) for (2).
This package includes a Python implementation of the "All-Pair-Binary" algorithm in Scaling Up All Pairs Similarity Search paper, with additional position filter optimization. This algorithm still has the same worst-case complexity as the brute-force algorithm, however, by taking advantage of skewness in empirical distributions of set sizes and frequencies, it often runs much faster (even better than MinHash LSH).
Run All-Pairs on 3.5 GHz Intel Core i7, using similarity function jaccard
and similarity threshold 0.5.
The running time of datasketch.MinHashLSH
is also shown below for
comparison (num_perm=32
).
Dataset | Input Sets | Avg. Size | SetSimilaritySearch Runtime |
datasketch Runtime |
datasketch Accuracy |
---|---|---|---|---|---|
Pokec social network (relationships): from-nodes are set IDs; to-nodes are elements | 1432693 | 27.31 | 10m49s | 11m4s | Precision: 0.73; Recall: 0.67 |
LiveJournal: from-nodes are set IDs; to-nodes are elements | 4308452 | 16.01 | 28m51s | 31m58s | Precision: 0.79; Recall: 0.74 |
Although datasketch.MinHashLSH
is an approximate algorithm, and I am using num_perm=32
which is quite low, it is still
a bit slower than the exact algorithm SetSimilaritySearch
.
The time for
creating datasketch.MinHash
is also included in the end-to-end time, while
in practice this time can be saved through pre-computation. However, for
ad hoc computation of All-Pairs, SetSimilaritySearch
is still
the better choice, especially when sets are small and fit in memory.
Run Query on 3.5 GHz Intel Core i7, using similarity function jaccard
and similarity threshold 0.5.
The query sets are sampled from the dataset itself.
The running time of datasketch.MinHashLSH
is also shown below for
comparison (num_perm=32
).
Dataset | Indexed Sets | Query Sets | Avg. Size | SetSimilaritySearch Indexing & Querying Time |
datasketch Indexing & Querying Time |
datasketch Accuracy |
---|---|---|---|---|---|---|
Pokec social network (relationships): from-nodes are set IDs; to-nodes are elements | 1432693 | 10k | 27.31 | Indexing: 1m7s; Querying (90pct): 2.3ms | Indexing: 9m23s; Querying (90pct): 0.72ms | Precision: 0.90; Recall: 0.88 |
LiveJournal: from-nodes are set IDs; to-nodes are elements | 4308452 | 10k | 16.01 | Indexing: 2m32s; Querying (90pct): 1.6ms | Indexing: 30m58s; Querying (90pct): 2.1ms | Precision: 0.85; Recall: 0.78 |
The indexing time for datasketch.MinHashLSH
, including the time for
creating datasketch.MinHash
, is much worse than SetSimilaritySearch
--
nearly 10x and 15x. Therefore SetSimilaritySearch
is much better for
ad hoc computation of the Query problem. For the scenario in which the same
search index is reused for many Query problems, datasketch.MinHashLSH
is
faster than SetSimilaritySearch
when the set sizes are large. This is
easy to understand: the size of datasketch.MinHash
is constant, wheres
a set can be arbitrarily large, so the query time for large sets is faster
when sketch is used. However, when the set sizes become smaller, the sketch
looses its advantage.
pip install -U SetSimilaritySearch
conda install -c conda-forge setsimilaritysearch
For All-Pairs, it takes an input of a list of sets, and output pairs that meet the similarity threshold.
from SetSimilaritySearch import all_pairs
# The input sets must be a Python list of iterables (i.e., lists or sets).
sets = [[1,2,3], [3,4,5], [2,3,4], [5,6,7]]
# all_pairs returns an iterable of tuples.
pairs = all_pairs(sets, similarity_func_name="jaccard",
similarity_threshold=0.1)
list(pairs)
# [(1, 0, 0.2), (2, 0, 0.5), (2, 1, 0.5), (3, 1, 0.2)]
# Each tuple is (<index of the first set>, <index of the second set>, <similarity>).
# The indexes are the list indexes of the input sets.
For Query, it takes an input of a list of sets, and builds a search index that can compute any number of queries. Currently the search index only supports a static collection of sets with no updates.
from SetSimilaritySearch import SearchIndex
# The input sets must be a Python list of iterables (i.e., lists or sets).
sets = [[1,2,3], [3,4,5], [2,3,4], [5,6,7]]
# The search index cannot be updated.
index = SearchIndex(sets, similarity_func_name="jaccard",
similarity_threshold=0.1)
# The query function takes input a set.
results = index.query([5,3,4])
results
# [(1, 1.0), (0, 0.2), (2, 0.5), (3, 0.2)]
# Each tuple is (<index of the found set>, <similarity>).
# The index is the list index of the sets in the search index.
Supported similarity functions (more to come):
similarity_func_name="jaccard"
.similarity_func_name="cosine"
.similarity_func_name="containment"
.You can also use the command line program all_pairs.py
.
The input must be one or two files with each line a unique SetID Token
tuple.
For example:
# Line starts with # will be ignored.
# Each line is <Set ID> <Token (i.e. Set Element)>, separate by a whitespace or tab.
# Every line must be unique.
1 a
1 b
1 c
1 d
2 a
2 b
2 c
3 d
3 e
When one input file is given, it computes All-Pairs; when two input files are given, it computes Query by building a search index on the first collection and querying with sets from the second collection -- effectively computes cross-collection pairs.
Example usage (All-Pairs):
all_pairs.py --input-sets testdata/example_input.txt \
--output-pairs testdata/example_output.txt \
--similarity-func jaccard \
--similarity-threshold 0.1