darmichar
commented
1 year ago Figured out what the issue is. I had previous issues with MCU errors and had removed and added my printer back to the Sonic Pad.
For whatever reason it now has a port after the IP address that I had to add to the moonraker config to get it to connect. The IP address in the pad itself is just a generic address to access the interface, you then have to choose the printer you want in the menus that includes a port.
For those having the same issues as this, look in the web interface and click the '3 dots' menu in the upper right corner and look in the list for an IP address with a port number.
An example would be http://192.168.X.X:XXXX/ where the last 4 X's are the port number and use that IP address in Cura.
Installed the extension through the marketplace and restarted Cura. Followed the instructions for setup and put the IP address of the Sonic Pad in Settings>Printer>Manage Printers>[Select Printer]>Connect Moonraker
Whenever I slice my file and click Upload to my printer, the rename window pops up and I click the upload button.
I have powered down the sonic pad and restarted it.
I have opened and closed Cura multiple times.
I have uninstalled and re-installed the extension.
I am on an M1 Mac Mini running the most recent version of Mac OS using Chrome as my primary browser.