A cross platform .NET Global Tool for creating and managing Architectural Decision Records (ADR).
Architectural Decision Records (ADRs) are simple Markdown documents used to record technical choices for a project by summarizing the context, the decision, and the consequences. dotnet adr
is a tool and a bundle of the most common ADR templates you can use to create and maintain ADRs in your solution.
Install using:
dotnet tool install -g adr
Install the default ADR templates using:
adr templates package set adr.templates
adr templates package install
Create a new ADR using:
adr new <TITLE>
Context drives intent, which manifests as code. This is the socio-technical contract of modern software development. If over time, code is the only remaining archeological artefact, we are simply left with effect without knowing the cause.
Over the last decade we have found immense value in Gherkin based Executable Specifications to describe the behaviour (or intent) of a system; in fact the Gherkin (Specflow) feature files have often outlived the original code and have been used to re-implement the system using a more modern language or framework.
Now we have the code, and the intent, but we're still missing an artefact that captures the context. Architectural Decision Records (ADRs) fill this requirement exceedingly well. ADRs are simple text documents (our preferred format is Markdown) which précis some or all of the following aspects of a decision:
The 1st Law of Simplicity is "Reduce", and much like Bezos' infamous 6-page memo format, brevity is the key to the power of ADRs. Rather than a heavyweight functional specification, ADRs have much more in common with minutes from a meeting. The meeting may take hours, but reading the minutes, should take... minutes.
Good code comments don't explain what the code does, they explain what the developer was thinking when they wrote the code, what assumptions they were making, and what they were trying to achieve. This allows anyone reviewing the code to spot any faults with logic, assumptions that proved to be incorrect, or requirements which have evolved. ADRs operate on the same principle. Anyone can review the ADRs and quickly grok the context, the assumptions, the rationale, the decision, and the consequences, without being bogged down in detail.
With modern cloud native solutions, recording context takes on a nuanced significance; cloud services vary from IaaS to PaaS to SaaS, as a consumer you are not in control of the feature set, the scale characteristics, or the price point. When making an architectural decision you may be constrained by a missing feature, a financial budget, or a performance target. The speed of cloud innovation means that any of these constraints can change on a monthly basis. Keeping track of feature announcements and re-evaluating the context of previously made decisions is an engineering practice you should adopt as part of the ADR process.
The principles of ADRs are straightforward, but the implementation can be simple or as complex as your team or organization requires. The out-of-the-box default template is the Nygard Pattern, but this tool and repo contains a number of alternative templates you can choose from, or you can create your own. If you want to read some real ADRs, check out these examples from our own OSS projects.
We find ADRs to be most effective when they are co-located with the code, in the same repo. We've worked on projects where "all documentation lives in Wiki / Confluence / SharePoint" because not all stakeholders have access to source control repos, but we find this approach to be high friction for all parties involved. This tool, adr
, is designed to encapsulate our recommended practices.
Several years ago we worked on a very complex project which required R&D, technical spikes, benchmarking, load-testing, performance tuning cycles, and further benchmarking in order to find the optimal solution. This process worked incredibly well and we delivered orders of magnitude performance improvements over the existing solution.
During the end-of-project retrospective we identified two sub-optimal outcomes; firstly we felt that while we had worked minor miracles in our technical solutions, the customer never seemed particularly impressed by the improvements. Secondly, the customer hired a new architect just as we finished delivering the solution, and as part of their onboarding process reviewed the solution and criticized almost every aspect with "I wouldn't have done it that way. At my last job we approached it like X and found it to be best".
We realized that the two issues were related. For the first problem, we concluded that we had failed to follow the most basic instruction you're given at school; "show your workings". We had hidden all the hard work, all the complexity, all of the hypothesis-testing experiments, and just presented the results Fait Accompli. The second problem had the same root cause. Because we had not recorded all of our experiments in a systematic way, we had no evidence to show that the approach the architect considered "best" was actually the first approach we took, but when we benchmarked and load-tested the approach it couldn't handle the data throughput at the price-point required by the customer. "Best" is entirely based on situational context. What's "best" in one situation is inappropriate in another.
We embrace evidence-based-decision-making as part of our experimental approach, and wanted to find a process that would allow us to document this in a formalized way. We did some research and discovered Architectural Decision Records. They have now become a fundamental part of our software and data engineering processes.
As a fully-remote organization, a secondary benefit from adopting ADRs has been how it allows us to enable distributed and asynchronous evidence gathering, discussions, decision making, and onboarding. This benefit manifests in a number of different ways; firstly, the process of drafting and evolving an ADR as a working group. Secondly, once the ADR reaches its "proposed status" it's very easy for senior decision makers to quickly grok the summary of the decision and provide input. Thirdly, any new contributor can get up to speed by using the collection of ADRs, AKA an Architecture Decision Log (ADL), to understand all the historical decisions that have been made, and most importantly what the situational context was at the point the decisions were made.
One of the reasons for "re-inventing the wheel" with adr
when there are so many ADR tools already in existence, is that almost all of those existing tools are opinionated to the point of embedding the ADR templates into the tooling.
Since we adopted ADRs in 2018, we've changed our default template a number of times. Thus, with adr
we wanted to decouple the tool from the templates, and make use of NuGet content packages as a mechanism to enable the ecosystem to build / use / share their own templates internally (using Azure DevOps or GitHub private package feeds), or publicly using nuget.org.
adr
is a .NET global tool, which means once installed, it's available on the PATH of your machine.
To install the adr
global tool use the following command:
dotnet tool install -g adr
To install a specific version, use:
dotnet tool install -g adr --version <version-number>
To update to the latest version of the tool, use:
dotnet tool update -g adr
To uninstall the tool, use:
dotnet tool uninstall -g adr
To list all the global tools installed on your machine, open a command prompt and type:
dotnet tool list -g
Here is a detailed list of the available adr
commands:
adr new <TITLE>
- Creates a new Architectural Decision Record, from the current default ADR Template, from the current ADR Template package.
adr new <TITLE> -i <RECORD NUMBER>
- Creates a new Architectural Decision Record, superseding the specified ADR record, which will have its status updated to reflect to point to this newly created ADR.
adr new <TITLE> -p <PATH>
- Creates a new Architectural Decision Record, from the current default ADR Template, from the current ADR Template package, for the Architecture Knowledge Management (AKM) folder located at the specified path.
adr new <TITLE> -i <RECORD NUMBER> -p <PATH>
- Creates a new Architectural Decision Record, for the Architecture Knowledge Management (AKM) folder located at the specified path, superseding the specified ADR record, which will have its status updated to reflect to point to this newly created ADR.
adr templates
- Manipulate ADR Templates & ADR Template Packages. Root command for template operations. Will list available sub-commands.
adr templates show
- Displays the detailed metadata of the current default ADR Template.
adr templates show --id-only
- Displays the id of the current default ADR Template.
adr templates set <TEMPLATE ID>
- Sets the default ADR Template. The <TEMPLATE ID>
can be obtained from adr templates show
adr templates list
- Displays a table containing the detailed metadata of all ADR Templates contained in the current default ADR Template Package.
adr templates list --ids-only
- Displays the ids of all ADR Templates contained in the current default ADR Template Package.
adr templates list --format-list
- Displays a list of the detailed metadata of all ADR Templates contained in the current default ADR Template Package.
adr templates package install
- Installs the latest version of the currently set ADR Templates Package.
adr templates package update
- Updates to the latest version of the currently set ADR Templates Package.
adr templates package set <PACKAGE ID>
- Sets the default NuGet ADR Template Package. Use adr.templates
.
adr templates package show
- Displays the default NuGet ADR Template Package.
adr environment
- Manipulate the dotnet-adr environment. Root command for environment operations. Will list available sub-commands.
adr environment init <PATH>
- Initializes a new Architecture Knowledge Management (AKM) folder. If <PATH>
is omitted, it will create docs\adr
in the current directory.
adr environment reset
- Resets the adr
environment back to its default settings.
While adr
is quite flexible in allowing you to specify were to create or update an ADR, either in the current directory, or by specifying a custom path using adr new <TITLE> -p <PATH>
, sometime it's better to create a "pit of quality" and standardize the Architecture Knowledge Management (AKM) folder location for all users of the tool.
To support this requirement you can create a file in the root of your repo called adr.config.json
which must have the following format:
{
"path": "./Docs/Adr"
}
Where the value of path
is relative to the root of the repo.
It's always hard to write a document starting from scratch; this is why the default ADR templates contain guidance in the form of headings and notes. Real-world examples are always much more helpful, so below is a list of some publicly available ADRs from our Open Source projects. If you explore the repos, you can find more examples:
We have collected a number of popular ADR templates.
NOTE: the status of the Open Source License for some of the templates is unclear. See each template for more details.
ADR using the Alexandrian Pattern Language Approach coined by Architect Christopher Alexander et. al in 1977, which distils the decision record into the following headings:
Source Joel Parker Henderson, see this issue about licensing.
Set as the default template using adr templates set alexandrian
Emphasizes creating a business case for a decision, including criteria, candidates, and costs, created by Joel Parker Henderson, which distils the decision record into the following headings:
Source Joel Parker Henderson, see this issue about licensing.
Set as the default template using adr templates set business-case
Architectural Decisions using Markdown and Architectural Decision Records, by Oliver Kopp, which distils the decision record into the following headings:
Available as dual-license under MIT and CC0. You can choose between one of them if you use this work.
Set as the default template using adr templates set madr
An adaptation of the Nygard pattern, by Paulo Merson which adds the rationale behind the decision. It distils the decision record into the following headings:
Available under the MIT License.
Set as the default template using adr templates set merson
A simple, low-friction "Agile" ADR approach by Michael Nygard, which distils the decision record into the following headings:
Available under CC0 1.0 Universal (CC0 1.0) Public Domain Dedication.
Set as the default template using adr templates set nygard
A Quality Assurance oriented approach by John Terzakis, which distils the decision record into the following headings:
Source Joel Parker Henderson, see this issue about licensing.
Set as the default template using adr templates set planguage
ADR approach by Jeff Tyree and Art Akerman, Capital One Financial, which distils the decision record into the following headings:
Source Joel Parker Henderson, see this issue about licensing.
Set as the default template using adr templates set tyree-ackerman
ADR Templates are simply markdown files which contain headings and guidance for the end users. The only hard requirement is that they contains # Title
and ## Status
headings as adr
uses Regular Expressions to find and replace these values to power the adr new <TITLE>
and adr new -s <RECORD NUMBER> <TITLE>
commands.
The default ADR Templates are contained in the Endjin.Adr.Templates
project, which contains NuGet configuration elements in Endjin.Adr.Templates.csproj
to create a NuGet "content" package, which is available via nuget.org as adr.templates
.
While we use MADR as the default template, because it has a nice balance of simplicity and power, it doesn't mean that it's the best template for you, your team, and your organization. First check-out the different templates which are available out of the box. If none of these are suitable then it's easy to make your own!
This repo contains an example extensibility "Third Party" ADR template example located in /Solutions/ThirdParty.Adr.Templates
, this is also available via nuget.org as thirdparty.adr.templates.
There are straightforward conventions for creating a customer ADR template package:
my-custom-adr-template
template.md
filetemplate.md
:---
Title:
Description:
Authors:
Effort:
More Info:
Version:
Last Modified: YYYY-MM-DD HH:MM
---
# Title
## Status
.csproj
file which contains the following properties:<Project Sdk="Microsoft.NET.Sdk">
<PropertyGroup>
<AssemblyName>thirdparty.adr.templates</AssemblyName>
<TargetFramework>net8.0</TargetFramework>
<IncludeBuildOutput>false</IncludeBuildOutput>
<SuppressDependenciesWhenPacking>true</SuppressDependenciesWhenPacking>
<!-- https://learn.microsoft.com/en-us/dotnet/core/tutorials/creating-app-with-plugin-support -->
<EnableDynamicLoading>true</EnableDynamicLoading>
</PropertyGroup>
<PropertyGroup>
<PackageLicenseExpression>Apache-2.0</PackageLicenseExpression>
<PackageDescription>An example demonstrating how a 3rd Party could create a dotnet-adr template package.</PackageDescription>
<PackageTags>dotnet-adr dotnet-adr-template architecture tools endjin</PackageTags>
<PackageReleaseNotes></PackageReleaseNotes>
</PropertyGroup>
<ItemGroup>
<Content Include="my-custom-adr-template\template.md">
<PackagePath>content\my-custom-adr-template</PackagePath>
<Pack>true</Pack>
</Content>
</ItemGroup>
</Project>
thirdparty.adr.templates.nupkg
NuGet package will be created. Publish this to nuget.orgTo swap between the packages use the following adr
commands:
adr templates package set thirdparty.adr.templates
Next, to download the latest version of 'thirdparty.adr.templates` use the command:
adr templates install
To see the currently set default package, use:
adr templates package show
To see the id of the currently set default template, use:
adr templates show
To revert to the "official" ADT Template Package you can either, reset the environment:
adr environment reset
or:
adr templates package set adr.templates
Then:
adr templates install
Optionally, store the template file file inside the repository, and specify the TemplatePath in the adr.config.json
file.
{
"templatePath": "./Docs/adr-template.md"
}
adr
stores various configuration files and packages in an application profile folder created in:
%%UserProfile%%\AppData\Roaming\endjin\dotnet-adr
Templates are stored in:
templates\
Configuration in:
configuration\
The templates NuGet package is cached in %%UserProfile%%\.nuget\packages
.
The project is hosted on GitHub and uses a GitHub Actions workflow and Endjin.RecommendedPractices.Build to manage the full DevOps lifecycle.
The NuGet packages for the project, hosted on NuGet.org are:
If you want to Create your own custom ADR Template Package, please add dotnet-adr
to the PackageTags
element.
adr
: What Are Architecture Design Records (ADR), and How Can You Get Started as a .NET Developer?This project is available under the Apache 2.0 open source license.
For any licensing questions, please email licensing@endjin.com
This project is sponsored by endjin, a UK based Technology Consultancy which specializes in Data, AI, DevOps & Cloud, and is a .NET Foundation Corporate Sponsor.
We help small teams achieve big things.
We produce two free weekly newsletters:
Keep up with everything that's going on at endjin via our blog, follow us on Twitter, YouTube or LinkedIn.
We have become the maintainers of a number of popular .NET Open Source Projects:
And we have over 50 Open Source projects of our own, spread across the following GitHub Orgs:
And the DevOps tooling we have created for managing all these projects is available on the PowerShell Gallery.
For more information about our products and services, or for commercial support of this project, please contact us.
This project has adopted a code of conduct adapted from the Contributor Covenant to clarify expected behaviour in our community. This code of conduct has been adopted by many other projects. For more information see the Code of Conduct FAQ or contact hello@endjin.com with any additional questions or comments.
The IP Maturity Model is endjin's IP quality assessment framework, which we've developed over a number of years when doing due diligence assessments of 3rd party systems. We've codified the approach into a configurable set of rules, which are committed into the root of a repo, and a Azure Function HttpTrigger HTTP endpoint which can evaluate the ruleset, and render an svg badge for display in repo's readme.md
.