This action sets up an Erlang/OTP environment for use in a GitHub Actions workflow by:
rebar3
hex
Note: currently, this action only supports Actions' ubuntu-
and windows-
runtimes.
See action.yml for the action's specification.
Input (tools') versions are controlled via with:
(check the examples below).
The Erlang/OTP release version specification, for example, is relatively
complex, so,
for best results, we recommend specifying exact
versions, and setting option version-type
to strict
.
However, values like 22.x
, or even >22
, are also accepted, and we attempt to resolve them
according to semantic versioning rules. This implicitly means version-type
is loose
,
which is also the default value for this option.
Additionally, it is recommended that one specifies versions
using YAML strings, as these examples do, so that numbers like 23.0
don't
end up being parsed as 23
, which is not equivalent.
For pre-release versions, such as v1.11.0-rc.0
, use the full version
specifier (v1.11.0-rc.0
) and set option version-type
to strict
. Pre-release versions are
opt-in, so 1.11.x
will not match a pre-release.
Set a tool's version to latest
to retrieve the latest version of a given tool.
The latest version is (locally) calculated by the action based on the (retrieved) versions
it knows (note: it is not the same as GitHub considers it
and some repositories might propose).
If in doubt do a test run and compare the obtained release with the one you were expecting to be the latest.
This list presents the known working version combos between the target operating system and Erlang/OTP.
Operating system | Erlang/OTP | Status |
---|---|---|
ubuntu-18.04 |
17.0 - 25.3 | ✅ |
ubuntu-20.04 |
21.0 - 27 | ✅ |
ubuntu-22.04 |
24.2 - 27 | ✅ |
ubuntu-24.04 |
24.3 - 27 | ✅ |
windows-2019 |
21* - 25 | ✅ |
windows-2022 |
21* - 27 | ✅ |
Note *: prior to 23, Windows builds are only available for minor versions, e.g. 21.0, 21.3, 22.0, etc.
Self-hosted runners need to set env. variable ImageOS
to one of the following, since the action
uses that to download assets:
ImageOS | Operating system |
---|---|
ubuntu18 |
ubuntu-18.04 |
ubuntu20 |
ubuntu-20.04 |
ubuntu22 |
ubuntu-22.04 |
ubuntu24 |
ubuntu-24.04 |
win19 |
windows-2019 |
win22 |
windows-2022 |
as per the following example:
...
jobs:
test:
runs-on: self-hosted
env:
ImageOS: ubuntu20 # equivalent to runs-on ubuntu-20.04
steps:
- uses: actions/checkout@v4
- uses: erlef/setup-beam@v1
...
The action provides the following outputs:
Output | Content |
---|---|
otp-version |
The Erlang version, e.g. OTP-26.0 |
elixir-version |
The Elixir version, e.g. v1.14-otp-26 |
gleam-version |
The Gleam version, e.g. v0.23.0 |
rebar3-version |
The rebar3 version, e.g. 3.18.0 |
setup-beam-version |
The commit unique id of the executed action version, e.g. a34c98f |
accessible as ${{steps.<setup-beam-step-id>.outputs.<Output>}}
,
e.g. ${{steps.setup-beam.outputs.erlang-version}}
A version file is specified via input version-file
(e.g..tool-versions
). This
allows not having to use YML input for versions, though the action does check (and
will exit with error) if both inputs are set.
Note: if you're using a version file, option version-type
is checked to be strict
,
and will make the action exit with error otherwise.
The following version file formats are supported:
.tool-versions
, as specified by asdf: ConfigurationSupported version elements are the same as the ones defined for the YML portion of the action, with the following correspondence.
.tool-versions
formatYML | .tool-versions |
---|---|
otp-version |
erlang |
elixir-version |
elixir |
gleam-version |
gleam |
rebar3-version |
rebar |
It is possible to use alternative hex.pm mirror(s), in their declared order, with
option hexpm-mirrors
. By default, the action will use builds.hex.pm
.
To use other alternative mirrors, add one per line, as shown below.
# create this in .github/workflows/ci.yml
on: push
jobs:
test:
runs-on: ubuntu-latest
steps:
- uses: actions/checkout@v4
- uses: erlef/setup-beam@v1
with:
otp-version: '26'
# Use `cdn.jsdelivr.net/hex` as an alternative to `builds.hex.pm`
hexpm-mirrors: https://cdn.jsdelivr.net/hex
Alternatively, you may try cdn.jsdelivr.net/hex
if builds.hex.pm
fails:
# create this in .github/workflows/ci.yml
on: push
jobs:
test:
runs-on: ubuntu-latest
steps:
- uses: actions/checkout@v4
- uses: erlef/setup-beam@v1
with:
otp-version: '26'
hexpm-mirrors: |
https://builds.hex.pm
https://cdn.jsdelivr.net/hex
Base installation folders (useful for e.g. fetching headers for NIFs) are available in the following environment variables:
INSTALL_DIR_FOR_OTP
: base folder for Erlang/OTPINSTALL_DIR_FOR_ELIXIR
: base folder for ElixirINSTALL_DIR_FOR_GLEAM
: base folder for GleamINSTALL_DIR_FOR_REBAR3
: base folder for rebar3
In each of these you'll find folder bin
where the appropriate binaries, platform-dependant,
are found (i.e. erl
, erl.exe
, rebar3
, rebar3.exe
, ...).
The Elixir Problem Matchers in this repository are adapted from here. See MATCHER_NOTICE for license details.
# create this in .github/workflows/ci.yml
on: push
jobs:
test:
runs-on: ubuntu-20.04
name: OTP ${{matrix.otp}} / Elixir ${{matrix.elixir}}
strategy:
matrix:
otp: ['21.1', '22.2', '23.3']
elixir: ['1.8.2', '1.9.4']
steps:
- uses: actions/checkout@v4
- uses: erlef/setup-beam@v1
with:
otp-version: ${{matrix.otp}}
elixir-version: ${{matrix.elixir}}
- run: mix deps.get
- run: mix test
rebar3
, on Ubuntu# create this in .github/workflows/ci.yml
on: push
jobs:
test:
runs-on: ubuntu-20.04
name: Erlang/OTP ${{matrix.otp}} / rebar3 ${{matrix.rebar3}}
strategy:
matrix:
otp: ['21.1', '22.2', '23.3']
rebar3: ['3.14.1', '3.14.3']
steps:
- uses: actions/checkout@v4
- uses: erlef/setup-beam@v1
with:
otp-version: ${{matrix.otp}}
rebar3-version: ${{matrix.rebar3}}
- run: rebar3 ct
rebar3
, on Windows# create this in .github/workflows/ci.yml
on: push
jobs:
test:
runs-on: windows-2022
steps:
- uses: actions/checkout@v4
- uses: erlef/setup-beam@v1
with:
otp-version: '24'
rebar3-version: '3.16.1'
- run: rebar3 ct
# create this in .github/workflows/ci.yml
on: push
jobs:
test:
runs-on: ubuntu-latest
steps:
- uses: actions/checkout@v4
- uses: erlef/setup-beam@v1
with:
otp-version: '24'
gleam-version: '0.23.0-rc1'
- run: gleam test
# create this in .github/workflows/ci.yml
on: push
jobs:
test:
runs-on: ubuntu-latest
steps:
- uses: actions/checkout@v4
- uses: erlef/setup-beam@v1
with:
otp-version: false
gleam-version: '0.23.0-rc1'
- run: gleam check
Note: the otp-version: false
input is only applicable when installing Gleam.
setup-beam
has three version paths, described below, for example version 1.8.0
:
@v1
: the latest in the 1.y.z
series (this tag is movable),@v1.8
: the latest in the 1.8.z
series (this tag is movable),@v1.8.0
: release 1.8.0
(this tag is not movable).We make a real effort to not introduce incompatibilities without changing the major
version number. To be extra safe against changes causing issues in your CI you should specify
an exact version with @vx.y.z
.
The scripts and documentation in this project are released under the MIT license.
Check out this doc.
This project's code of conduct is made explicit in CODE_OF_CONDUCT.md.
This project's security policy is made explicit in SECURITY.md.