Provides MQTT bridge, web service API, time sync, and logging for HAI/Leviton OmniPro II controllers. Provides integration with Samsung SmartThings via web service API and Home Assistant via MQTT.
Please note that OmniLink Bridge is not in active development. The MQTT and Home Assistant integrations are in maintenance mode. The SmartThings Web API and MySQL logging are deprecated and not feature consistent with MQTT.
You can use docker to build an image from git or download the binary here. You can also install it as a Home Assistant Add-on.
OmniLink Bridge is divided into the following modules and configurable settings. Configuration settings can also be set as environment variables by using their name in uppercase. Refer to OmniLinkBridge.ini for specifics.
Quickly get started with console logging by specifying the controller address and encryption keys.
docker run --name="omnilink-bridge" \
-v /etc/localtime:/etc/localtime:ro \
-e CONTROLLER_ADDRESS='' \
-e CONTROLLER_KEY1='00-00-00-00-00-00-00-00' \
-e CONTROLLER_KEY2='00-00-00-00-00-00-00-00' \
--net=host excaliburpartners/omnilink-bridge
Or start in the background with time sync and MQTT modules enabled.
docker run -d --name="omnilink-bridge" --restart always \
-v /etc/localtime:/etc/localtime:ro \
-e CONTROLLER_ADDRESS='' \
-e CONTROLLER_KEY1='00-00-00-00-00-00-00-00' \
-e CONTROLLER_KEY2='00-00-00-00-00-00-00-00' \
-e TIME_SYNC='yes' \
-e MQTT_ENABLED='yes' \
-e MQTT_SERVER='' \
-e MQTT_USERNAME='' \
-e MQTT_PASSWORD='' \
--net=host excaliburpartners/omnilink-bridge
mkdir /opt/omnilink-bridge
curl https://raw.githubusercontent.com/excaliburpartners/OmniLinkBridge/master/OmniLinkBridge/OmniLinkBridge.ini -o /opt/omnilink-bridge/OmniLinkBridge.ini
vim /opt/omnilink-bridge/OmniLinkBridge.ini
docker run -d --name="omnilink-bridge" -v /opt/omnilink-bridge:/config -v /etc/localtime:/etc/localtime:ro --net=host --restart always excaliburpartners/omnilink-bridge
docker logs omnilink-bridge
git clone https://github.com/excaliburpartners/OmniLinkBridge.git
cd OmniLinkBridge
docker build --tag="omnilink-bridge" .
mkdir /opt/omnilink-bridge
cp OmniLinkBridge/OmniLinkBridge.ini /opt/omnilink-bridge
vim /opt/omnilink-bridge/OmniLinkBridge.ini
docker run -d --name="omnilink-bridge" -v /opt/omnilink-bridge:/config -v /etc/localtime:/etc/localtime:ro --net=host --restart always omnilink-bridge
docker logs omnilink-bridge
sc create OmniLinkBridge binpath=C:\OmniLinkBridge\OmniLinkBridge.exe
net start OmniLinkBridge
vim OmniLinkBridge.ini
mono OmniLinkBridge.exe -i
cp omnilinkbridge.service /etc/systemd/system/
vim /etc/systemd/system/omnilinkbridge.service
systemctl daemon-reload
systemctl enable omnilinkbridge.service
systemctl start omnilinkbridge.service
SUB omnilink/status
string online, offline
SUB omnilink/model
string Controller model
SUB omnilink/version
string Controller version
SUB omnilink/system/phone/state
string secure, trouble
SUB omnilink/system/ac/state
string secure, trouble
SUB omnilink/system/battery/state
string secure, trouble
SUB omnilink/system/dcm/state
string secure, trouble
SUB omnilink/areaX/name
string Area name
SUB omnilink/areaX/state
string triggered, arming, armed_night, armed_night_delay, armed_home, armed_home_instant, armed_away, armed_vacation, disarmed
SUB omnilink/areaX/basic_state
string triggered, arming, armed_night, armed_home, armed_away, armed_vacation, disarmed
SUB omnilink/areaX/json_state
string json
PUB omnilink/areaX/command
string arm_home, arm_away, arm_night, disarm, arm_home_instant, arm_night_delay, arm_vacation
note Use area 0 for all areas
note Optionally the user code number can be specified 'disarm,1'
note Optionally the security code can be be specified 'disarm,validate,1234'
PUB omnilink/areaX/alarm_command
string burglary, fire, auxiliary
SUB omnilink/zoneX/name
string Zone name
SUB omnilink/zoneX/state
string secure, not_ready, trouble, armed, tripped, bypassed
SUB omnilink/zoneX/basic_state
string OFF, ON
SUB omnilink/zoneX/current_temperature (optional)
int Current temperature in degrees fahrenheit
SUB omnilink/zoneX/current_humidity (optional)
int Current relative humidity
PUB omnilink/zoneX/command
string bypass, restore
note Use zone 0 to restore all zones
note Optionally the user code number can be specified 'bypass,1'
SUB omnilink/unitX/name
string Unit name
SUB omnilink/unitX/state
PUB omnilink/unitX/command
string OFF, ON
SUB omnilink/unitX/brightness_state
PUB omnilink/unitX/brightness_command
int Level from 0 to 100 percent
SUB omnilink/unitX/flag_state
PUB omnilink/unitX/flag_command
int Level from 0 to 255
SUB omnilink/unitX/scene_state
PUB omnilink/unitX/scene_command
string A-L
SUB omnilink/thermostatX/name
string Thermostat name
SUB omnilink/thermostatX/status
string online, offline
SUB omnilink/thermostatX/current_operation
string idle, cooling, heating
SUB omnilink/thermostatX/current_temperature
int Current temperature in degrees fahrenheit
SUB omnilink/thermostatX/current_humidity
int Current relative humidity
SUB omnilink/thermostatX/temperature_heat_state
SUB omnilink/thermostatX/temperature_cool_state
PUB omnilink/thermostatX/temperature_heat_command
PUB omnilink/thermostatX/temperature_cool_command
int Setpoint in degrees fahrenheit
SUB omnilink/thermostatX/humidify_state
SUB omnilink/thermostatX/dehumidify_state
PUB omnilink/thermostatX/humidify_command
PUB omnilink/thermostatX/dehumidify_command
int Setpoint in relative humidity
SUB omnilink/thermostatX/mode_state
PUB omnilink/thermostatX/mode_command
string auto, off, cool, heat, e_heat
SUB omnilink/thermostatX/mode_basic_state
string auto, off, cool, heat
SUB omnilink/thermostatX/fan_mode_state
PUB omnilink/thermostatX/fan_mode_command
string auto, on, cycle
SUB omnilink/thermostatX/hold_state
string off, on, vacation
PUB omnilink/thermostatX/hold_command
string off, on
SUB omnilink/buttonX/name
string Button name
SUB omnilink/buttonX/state
string OFF, ON
PUB omnilink/buttonX/command
string ON
SUB omnilink/messageX/name
string Message name
SUB omnilink/messageX/state
string off, displayed, displayed_not_acknowledged
PUB omnilink/messageX/command
string show, show_no_beep, show_no_beep_or_led, clear
SUB omnilink/lockX/name
string Lock name
SUB omnilink/lockX/state
string locked, unlocked
PUB omnilink/lockX/command
string lock, unlock
SUB omnilink/sourceXX/name
string Audio source name
SUB omnilink/audioXX/name
string Audio zone name
SUB omnilink/audioXX/state
PUB omnilink/audioXX/command
string OFF, ON
note Use audio 0 to change all audio zones
SUB omnilink/audioXX/mute_state
PUB omnilink/audioXX/mute_command
string OFF, ON
note Use audio 0 to change all audio zones
SUB omnilink/audioXX/source_state
PUB omnilink/audioXX/source_command
string Source name
note Refer to omnilink/sourceXX/name
SUB omnilink/audioXX/volume_state
PUB omnilink/audioXX/volume_command
int Level from 0 to 100 percent
double Level from 0.00 to 1.00 (mqtt_audio_volume_media_player = yes)
To test the web service API you can use your browser to view a page or PowerShell (see below) to change a value.
Invoke-WebRequest -Uri "http://localhost:8000/SetUnit" -Method POST -ContentType "application/json" -Body (convertto-json -InputObject @{"id"=1;"value"=100}) -UseBasicParsing
POST /Subscribe
{ "callback": url }
Callback is a POST request with Type header added and json body identical to the related /Get
Type: area, contact, motion, water, smoke, co, temp, unit, thermostat
GET /ListAreas
GET /GetArea?id=X
GET /ListZonesContact
GET /ListZonesMotion
GET /ListZonesWater
GET /ListZonesSmoke
GET /ListZonesCO
GET /ListZonesTemp
GET /GetZone?id=X
GET /ListUnits
GET /GetZone?id=X
POST /SetUnit
POST /SetUnitKeypadPress
{ "id":X, "value":0-100 }
GET /ListThermostats
GET /GetThermostat?id=X
POST /SetThermostatCoolSetpoint
POST /SetThermostatHeatSetpoint
POST /SetThermostatMode
POST /SetThermostatFanMode
POST /SetThermostatHold
{ "id":X, "value": }
int mode 0=off, 1=heat, 2=cool, 3=auto, 4=emergency heat
int fanmode 0=auto, 1=on, 2=circulate
int hold 0=off, 1=on
GET /ListButtons
POST /PushButton
{ "id":X, "value":1 }
The MySQL ODBC Connector is required for MySQL logging. The docker image comes with the MySQL ODBC connector installed. For Windows and Linux you will need to download and install it. The Home Assistant Add-on does not support MySQL logging.
Configure mysql_connection in OmniLinkBridge.ini. For Windows change DRIVER={MySQL} to name of the driver shown in the ODBC Data Source Administrator.
mysql_connection = DRIVER={MySQL};SERVER=localhost;DATABASE=OmniLinkBridge;USER=root;PASSWORD=myPassword;OPTION=3;
OmniLink Bridge collects anonymous telemetry data to help improve the software. You can opt of telemetry by setting a TELEMETRY_OPTOUT environment variable to 1.