This p2pool is best installed using the p2pool-oneclick installer.

    https://github.com/farsider350/p2pool-oneclick/blob/dgb-scrypt-merged/README.md

For the experienced p2pool setup follow the guide bellow

P2pool installation with pypy -- Windows

    On Windows, pypy is only supported via the Windows Subsystem for Linux (WSL). P2pool on pypy on WSL is much faster than P2pool on
    CPython on native Windows. To install WSL, first follow the steps outlined here:

    https://msdn.microsoft.com/en-us/commandline/wsl/install_guide

    Once you've done that, run bash and follow the rest of the steps below.

P2pool installation with pypy -- Linux and Windows

Copy and paste the following commands one paragraph at a time into a bash shell in order to install p2pool on Windows or Linux.

    sudo apt-get update

    sudo apt-get install pypy pypy-dev pypy-setuptools gcc build-essential git

    wget https://bootstrap.pypa.io/ez_setup.py -O - | sudo pypy
    sudo rm setuptools-*.zip

    wget https://pypi.python.org/packages/source/z/zope.interface/zope.interface-4.1.3.tar.gz#md5=9ae3d24c0c7415deb249dd1a132f0f79
    tar zxf zope.interface-4.1.3.tar.gz
    cd zope.interface-4.1.3/
    sudo pypy setup.py install
    cd ..
    sudo rm -r zope.interface-4.1.3*

    wget https://pypi.python.org/packages/source/T/Twisted/Twisted-15.4.0.tar.bz2
    tar jxf Twisted-15.4.0.tar.bz2
    cd Twisted-15.4.0
    sudo pypy setup.py install
    cd ..
    sudo rm -r Twisted-15.4.0*

    git clone https://github.com/farsider350/p2pool-dgb-scrypt-350.git
    cd p2pool-dgb-scrypt-350
    cd digibyte_subsidy
    sudo pypy setup.py install
    cd ..
    cd litecoin_scrypt
    sudo pypy setup.py install    

digibyte.conf

    server=1
    rpcuser=user
    rpcpassword=anything long
    algo=scrypt
    listenonion=0
    listen=1
    daemon=1
    gen=0
    onlynet=IPv4
    rpcworkqueue=32
    rpcthreads=96
    rpcallowip=127.0.0.1
    rpcport=14024
    port=12024
    deprecatedrpc=accounts

Running P2Pool:

To use P2Pool, you must be running your own local digibyted. For standard configurations, using P2Pool should be as simple as:

    For Zen Server
    pypy run_p2pool.py --net digibyte

To make your node accessible from the internet, open the following ports on your router (both the worker port and peer-2-peer port please!): Worker Port = 5025; Peer-2-Peer Port = 5024

To make Your Digibyte Core server accept incoming Peer-2-Peer connections, open the following ports on your router: Digibyte Core Peer-2-Peer Port = 12024

Run for additional options:

    pypy run_p2pool.py --help

Donations towards further development:

BTC: bc1q5h3j9xr5hd53mt9n3wq3a26dwch7f7nv70ej08 DOGE: DPV4B91YzAF361R2FS5uemfgtNV8nEseXW