Aerodynamics model for Kerbal Space Program
Serious thanks:
DaMichel, for some ferramGraph updates and some control surface-related features
CompatibilityChecker by Majiir, BSD 2-clause http://opensource.org/licenses/BSD-2-Clause
Part.cfg changes powered by sarbian & ialdabaoth's ModuleManager plugin; used with permission
http://forum.kerbalspaceprogram.com/threads/55219
ModularFLightIntegrator by Sarbian, Starwaster and Ferram4, MIT: http://opensource.org/licenses/MIT http://forum.kerbalspaceprogram.com/threads/118088
Toolbar integration powered by blizzy78's Toolbar plugin; used with permission
http://forum.kerbalspaceprogram.com/threads/60863
Source available at: https://github.com/ferram4/Ferram-Aerospace-Research
Install by merging the GameData folder in the zip with the GameData folder in your KSP install
ModuleManager and ModularFlightIntegrator are REQUIRED for FAR to work properly. Failing to copy this over will result in strange errors.
Sample Part.cfg:
MODULE
{
name = FARControllableSurface / FARWingAerodynamicModel
b_2 = 0.5 //distance from wing root to tip; semi-span
MAC = 0.5 //Mean Aerodynamic Chord
nonSideAttach = 0 //0 for canard-like / normal wing pieces, 1 for ctrlsurfaces attached to the back of other wing parts
TaperRatio = 0.7 //Ratio of tip chord to root chord generally < 1, must be > 0
MidChordSweep = 25 //Sweep angle in degrees; measured down the center of the span / midchord position
maxdeflect = 15 //Default maximum deflection value; only used by FARControlableSurface
controlSurfacePivot = 1, 0, 0; //Local vector that obj_ctrlSrf pivots about; defaults to 1, 0, 0 (right)
ctrlSurfFrac = 0.2 //Value from 0-1, percentage of the part that is a flap; only used by FARControlableSurface
}For control surfaces, use above but replace FARWingAerodynamicModel with FARControllableSurface and add maxdeflect value
Set all the other winglet/control surface values to zero
0.15.9.1V "Liepmann"------------------------------------
Update for KSP 1.3.1 (though not strictly necessary)
Update to MM 3.0.4 for KSP 1.3.1
Added ability to override structural stress values for aerodynamic failures on a per-part basis
Switch to applying forces through part.AddForce rather than rb.AddForce to allow Principia to handle gravity within atmospheres
Added functions to KSPAPI to check the status of any vessel's voxelization
Fix issues with all RealChuteLite chutes having the same exact drag properties
Fix RealChuteLite GUI not displaying any information
Remove unnecessary stock lifting body effects on pods
0.15.9V "Liebe"------------------------------------
Update for KSP 1.3
Update to MM 2.8.1
Include support for localization
Include German (by terorie), Russian (by pand5461), and Chinese (by Nigh) translations
Fix NaN errors with Trajectories
Fix some issues with identifying KSPWheel Adjustable Landing Gear as gear
0.15.8.1V "Lewis"------------------------------------
Bugfix patch for KSP 1.2.2
Fix Flight GUI button activated/not activated being backwards
Don't revoxelize for several B9 and AJE animation modules to reduce lag, thanks blowfish
Fix game crashing when a vessel landed in water is loaded
0.15.8V "de Laval"------------------------------------
Compatibility for KSP 1.2.2 (finally)
Update to MFI 1.2.4
Update to MM 2.7.6
Lots of compatibility changes thanks to Alexander Abramov
Reduce memory use and garbage production in GUI thanks to soulsource and Virindi-AC
Fix GUI button multiplication
Fix stock drag arrows to be useful again
Fix voxelization errors with some intake parts
Fix FARAction group settings not saving
Fix landing gear main axis dtermination
Fix voxel errors with some stock parts
Made ignorable transforms for voxelization customizable via config
0.15.7.2V "Lanchester"------------------------------------
Fix a serious bug in v0.15.7 and v0.15.7.1 where chutes would not provide any drag
0.15.7.1V "Kutta"------------------------------------
Update to MFI 1.1.6 to fix an incompatibility with Kopernicus and the earlier version
Update CompatibilityChecker version
Update license
Fix an issue where voxels could be incredibly asymmetric on symmetric crafts
0.15.7V "Küchemann"------------------------------------
Update to ModuleManager 2.6.25
Update for KSP 1.1.3 compatibility
Implement higher resolution sub-voxel voxelization method
Allow switching between high and low res sub-voxel methods
Optimize voxel shell generation, particularly for high triangle count meshes
Increase the resistance to sideways aerostructural failures for many fuselage and rocket parts
Fix voxelization error that would lead to transparent mesh objects being voxelized
Fix voxelization errors that could lead to incomplete voxelization of some stock procedural fairing shapes
0.15.6.5V "Knudsen"------------------------------------
Update to ModularFlightIntegrator 1.1.4
Fix a serious issue where wings would provide no forces and forces would be distributed incorrectly across vehicles
Fix an issue where wing symmetry counterparts would not have equal masses
Fix non-zero convective heat flux on shielded parts
0.15.6.4V "Kleinhans"------------------------------------
Fix a no-drag issue with asteroids
Fix a physics breaking issue with Tweakscaled wing parts, thanks pellinor
Fix GUI window positions not loading on vessel spawn
Fix distribution of forces on parts; no change in total force and torque applied to vessel, just to which parts
Fix slightly negative drag on rearward-facing vehicles at high Knudsen numbers
0.15.6.3V "Kindelberger"------------------------------------
Recompile for KSP 1.1.2 compatibility
Bundle ModuleManager 2.6.24 for 1.1.2 compatibility
Fix a critical error that would cause KerbalEVAs to have no aerodynamic forces applied to them
0.15.6.2V "Kartveli"------------------------------------
Ensure KSP 1.1.1 compatiblity
Upgrade to ModuleManager 2.6.23
Fix new landing gear interfering with main axis determination
Fix RealChute / RealChuteLite interaction breaking stock chute behavior, thanks to stupid_chris
Fix mass-calc error for wing-mass-strength that resulted in all planes gaining unhealthy amounts of weight
Attempt to make debug-compatibility actually work, thanks to NathanKell
0.15.6.1V "von Kármán"------------------------------------
Fix a critical CPU usage bug that resulted in voxelization threads SpinWaiting forever, monopolizing the processor
Fix parachutes without RealChute configs not applying forces when FAR + RC are installed, thanks to stupid_chris
Fix ModuleManager database reload function hanging halfway through, breaking the game, thanks to stupid_chris
0.15.6V "Jones"------------------------------------
Update to KSP 1.1
Update to bundle ModuleManager 2.6.22
Update to bundle ModularFlightIntegrator 1.1.3
Updates to RealChuteLite, thanks to stupid_chris
Compatibility changes for use of KSP debuggers, thanks to neouy
Increase aerodynamic damping for fuselages to somewhat more realistic levels
Fix a serious issue that disabled the majority of conduction between parts
Disable win64 locking
0.15.5.7V "Johnson"------------------------------------
Tweak pitch and roll damping of fuselages to make more logical sense; excessive roll damping at high dynamic pressures for wingless vehicles has been fixed
Change units for specific excess power in the Flight Data readout to be W/kg on the basis that it makes more logical sense than m^2/s^3
Fix a critical error that prevented voxelizations of Kerbals or any vehicles that had Kerbals riding in a command seat
0.15.5.6V "Jacobs"------------------------------------
Update to MM 2.6.18
Fix more negative sonic drag issues
Fix unrealistically low sonic drag
Fix failure to load saved FAR data in flight
Fix unrealistically high numbers in indicated airspeed at higher Mach numbers
Lower critical Mach number for slender vehicles with sudden bulges and waviness in their cross-section
0.15.5.5V "Hugoniot"------------------------------------
Fix an inconsistency in calculations of sonic drag
Fix possibility of sonic drag resulting in negative drag coefficients on very blunt shapes
Generally increase sonic drag of blunt objects, generally decrease drag of slender objects
Fix water drag failing to function under complete submersion
Fix rare error where Procedural Fairings will not properly voxelize
Fix GetCurrentDensity method (for external mods) to return result consistent with simulation
Fix overheat interaction on load with ModuleCoreHeat
Fix FAR breaking on attempts to load Training or Scenario scenes
Fix spoilers and flaps not updating with settings in the editor
0.15.5.4V "Hoerner"------------------------------------
Adjust water drag for better splashdown performance
Fix a serious voxelization issue with ModuleJettison, most notable in leading to no-drag reentries
Fix an issue where 3rd-party voxelization updates could sometimes break the editor GUI and CoL
Fix a serious issue that could lead to spontaneous crashes on aero initialization (either VAB / SPH CoL, editor GUI, or going to flight)
0.15.5.3V "von Helmholtz"------------------------------------
Upgrade to MM 2.6.13
RealChuteLite consistency with RealChute calcs and optimizations thanks to stupid_chris
Implement dynamic smoothing calculations based on relative "filledness" of voxel; should help reduce effect of voxel-resolution-induced smoothing on larger vehicles
Tweaks to critical Mach calculations
Fix "silent" KSP update breaking hydrodynamic drag
Fix some voxelization irregularities
Fix control surface flap settings not appearing if the settings are turned on in flight
Fix some other control surface in-flight changes oddities
Fix Firehound MS example craft action groups not acting in symmetry
Added E42 example craft by tetryds
0.15.5.2V "Helmbold"------------------------------------
Compatibility with KSP 1.0.5
Upgrade to MFI 1.1.2
Optimizations of runtime aerodynamic calculations
Cut background memory usage for voxels to ~60% of previous value
Increases in consistency of properties with similar voxel shapes
Full support for new stock hydrodynamic drag
Voxel model used in calculating radiative influx from celestial bodies
Reduction in first-load inconsistency in editor
More varied support for intake ducting setups, including support for stock Goliath engine
Tweaks to intake drag at low airbreather throttles
Editor GUI header cleanup
Dropdowns notated with down triangles for clarity
Added AoA Arrow to make AoAs for static analysis sweeps and stability deriv sims clearer
Fix for voxelization issues with degenerate triangles
Fix for voxelization issues with meshes with 0 triangles
Fix for B9 pWings not solidifying properly
Fix editor race condition in displaying sonic drag for vehicles
Fix for multiple vehicle aerodynamic NREs that could break aero
Fix for vehicle aerodynamics breaking under certain vessel-part configurations
Updated FAR Firehound MS, FAR SkyEye, FAR Montauk Shuttle to be more useful in KSP 1.0.5
0.15.5.1V "Hayes"------------------------------------
Upgrade to MM 2.6.8
Fix some legacy wing interaction issues
Fix drag properties drifting slowly over multiple voxelization events due to numerical errors
Fix parts being occluded when main axis is in a strange orientation
Fix in-flight control surface tweaks not applying to symmetry counterparts
Fix KerbalEVAs working with Vanguard Parachutes
Fix for a critical error where detached boosters, weapons, debris, etc. would not have drag properties
0.15.5V "Haack"------------------------------------
Upgrade to MM 2.6.7
Fix for some RealChute issues by DaMichel
Animation ignoring for voxelization by Blowfish
Addition of air brakes for yaw control (RudderBrakes) adopted from original code contributed by HoneyFox
Reduction in memory garbage created during voxelization; this should reduce the impact of voxelization somewhat, especially hitching. Note: some hitching may still occur with vehicles with many wing parts due to legacy wing code
Runtime performance optimizations for ram drag and general aero calculations
Highly optimized bounds checking for voxelization
Kerbals handled by voxel model now (using a simple primitive shape, presence or absence of helmet doesn't matter)
Control surface parameters available for tweaking in flight
Control surface tweakables given open/close buttons for sections to reduce clutter
Revert BDArmory bombs and missiles to stock model after launch to improve tracking, stability and predictions
Fixed main axis issue with BDArmory parts and similarly designed parts
Fixed a long-standing issue in wing aspect ratio calcs (they were double what they should have been)
Fixed ram drag variation with throttle not accepting AJE jets as valid jets for that purpose
Fixed drag not using the calculated critical Mach number for the beginning of the drag transonic rise
Fixed possible NRE issues during steady destruction of vessel with parts being destroyed
Fixed issue where increased number of wing parts would cause wing mass adjustment to increase mass without bound; mass is now bounded, but more concentrated in root parts than wingtip parts
Tweaked subsonic drag downwards to get more accurate results with fixed AJE props
Tweaked wing mass downwards slightly
Tweaked wing strength power to result in greater strength from lower-mass wings
0.15.4.1V "Goldstein"------------------------------------
Re-implementation of aero viz coloration, thanks to mjn33
Reduction in garbage produced by voxelization, prep for further garbage reductions
Fixed NaN issue with KAX electric props
Fixed drag-breaking NRE during rapid disintegrations
Fixed some issues with Blizzy Toolbar icons
Fixed exacerbation of stock heating bug
Fixed control surfaces not updating direction during staging-related CoM shifts
0.15.4V "Glauert"------------------------------------
Update to MM 2.6.6
Update to MFI 1.1.1, fixes gimbaling bug below 750 m/s on short vehicles
Update win64 check code to MM method
Added internal ducted area feature:
Slight improvement to Flight Data readouts from mjn33
Toggle gear button now states "Raise" or "Lower" gear for clarity
Fixed serious issue where exposed area was not updated for thermal calculations
Fixed some blunt shapes having NaN drag in the transonic regime
Fixed some blunt, thin-plate shapes having negative drag in the transonic regime
Fixed serious issue where long, skinny vehicles would have incorrect 2nd derivatives and incorrect transonic drag as a result
Fixed NRE with Launch Clamps
Fixed NRE with animations that are removed from a part (for whatever reason)
Cleaned up unused values from FARAeroData.cfg
Added support for planets to be identified by planet name, not just index; combining these in a FARAeroData MM patch is likely to cause overwrites, don't do it
Added ability to read and set flap and spoiler states from FARAPI
Fixed Firespitter gear not responding to Toggle Gear button
Added support for adjustable landing gear in Toggle Gear button
Stopgap fix to unintended voxelization of USI Warp Drive bubbles
0.15.3.1V "Garabedian"------------------------------------
Compatibility with KSP v1.0.3 and thermal changes
Fix one last error with voxelization breaking due to reverts
Add ability to make parts not count for main axis determination; fix structural panels interfering with proper main axis determination
0.15.3V "Froude"------------------------------------
Update to MM 2.6.5 for greater nyan nyan
Allow display of pressure coefficient (under assumption of axisymmetric flow) over the vehicle
Tweak subsonic drag to be lower for slender shapes
Fixed voxelization breaking due to combined memory leak + hard memory limit for voxelization after many editor -> flight cycles
Fixed some race conditions in voxelization that could break aero properties
Fixed deadlock in threadpool if many voxelization events triggered simultaneously
Fixed possibility of deadlock if voxelization settings were updated
Fixed voxelization errors for some cargo bays and other parts
Fixed voxelization errors for pWings; includes support for any parts making use of mirrorAxis
Fixed some longstanding wing interaction issues, including permanent stalled wings
Fixed a newer issue with wing shielding on symmetry counterparts
Some main axis determination improvements
Fixed an where certain user atmospheric settings would not take
0.15.2V "Ferri"------------------------------------
Improved voxelization accuracy
Changed CoL code again to try and make it more useful
Cleaned up some unnecessary calculations
Fixed voxelization breaking after many voxelization events; this fixes no-drag situations
Fixed deployed spoilers not producing drag if mounted flush with vehicle
Fixed some main axis issues
Fixed improper heating area for atmospheric heat
Fixed interaction with KIS breaking things
Fixed some data not saving
Fixed exceptions during EVA
0.15.1V "Fanno"------------------------------------
Fixed improper voxelization of debris and vehicles dropped from existing vessel, including effects on stock "occlusion" system
Fixed improper determination of vehicle main axis
Fixed Kerbal EVAs having no drag
Fixed exceptions where outirght disintegration could prevent some vehicles from having aerodynamics applied
Added upper cap on memory allocated for voxelization
Changed calculation of CoL to make more sense
Fixed error in determining AoA for nominal flight in Stability Derivative GUI
Hid yellow aero moment arrows by default in aero overlay to reduce user confusion
Fixed lift / drag arrows remaining on wings that become shielded when aero overlay is open
Switched to a cleaner method of setting internal speedometers
Disable control surfaces auto-response below 5 m/s to prevent wacky flailing during load / when stopped
Change compatibility settings to reject KSP 1.0.0, which is not compatible with RealChuteLite
Updated save-load method to save more reliably and not throw exceptions
0.15V "Euler"------------------------------------
Compatibility with KSP 1.0, 1.0.1, and 1.0.2
Upgraded to MM 2.6.3
Introduction of ModularFlightIntegrator for interfacing with KSP drag / heating systems without interference with other mods
Replaced previous part-based drag model with new vessel-centered, voxel-powered model:
Performance optimizations in legacy wing model
Jet engine windmilling drag accounted for at intakes
Editor GUI improvements including:
Parachute methods have been replaced with RealChuteLite implementation by stupid_chris:
Changes to FARAPI to get information faster
FARBasicDragModel, FARPayloadFairingModule, FARCargoBayModule are now obsolete and removed from the codebase
Extensive reorganizing of source to reduce spaghetti and improve maintainability
Modifications to Firehound and Colibri to function with new flight model
Addition of Blitzableiter and SkyEye example crafts
A 1.5x increase to all stock gimbal ranges
0.14.7V------------------------------------
Features:
Raised stalled-wing drag up to proper maximum levels
Adjusted intake drag to be lower
Improved method of dealing with very high vertex count parts for geometry purposes
Upgraded to MM 2.5.13
Included FAR Colibri, a VTOL by Tetryds as an example craft
Bugfixes:
Fixed an issue preventing loading custom-defined FARBasicDragModels
0.14.7V------------------------------------
Features:
Raised stalled-wing drag up to proper maximum levels
Adjusted intake drag to be lower
Improved method of dealing with very high vertex count parts for geometry purposes
Upgraded to MM 2.5.13
Included FAR Colibri, a VTOL by Tetryds as an example craft
Bugfixes:
Fixed an issue preventing loading custom-defined FARBasicDragModels
0.14.6V------------------------------------
Features:
Modified skin friction variation with M and Re to closer to that expected by using the Knudsen number
Changed saving and loading method to allow better behavior when settings need to be cleaned during updates, especially for automated installs
Modified aerodynamic failures for water landings for compatibility with upcoming BetterBuoyancy
Option for aerodynamic failures to result in explosions at the joint during failure.
Serious reworking to handle edge cases with lightly-clipped parts and their effects on blunt body drag (read: when people clip heatshields into the bottom of Mk1 pods and cause problems)
Upgrade to MM 2.5.6
Bugfixes:
Fixed an issue that prevented Trajectories from functioning
Fixed blunt body drag errors with AJE
Fixed issues involving editor GUI and control surface deflections
Fixed edge cases involving attach-node blunt body drag being applied when it shouldn't have
Fixed issues with command pods containing intakes
0.14.5.1V------------------------------------
Features:
Add Reynolds Number readout to main flight GUI
Tweaks:
Adjust skin friction drag for rarefied atmosphere
Bugfixes:
Fix Stab Deriv GUI from breaking for altitudes above atmosphere
Fix flaps and spoilers not functioning with negative deflections
0.14.5V------------------------------------
Features:
Skin friction drag now varies with Reynolds number; this means much higher skin friction drags at higher altitudes
Added simple attempt at handling hydrodynamic effects; not detailed, but objects in oceans move much less
Added color changing options for colorblind users
Tweak flap and spoiler deflection functions
Give spoilers faster deflection coefficients
Update to ModuleManager 2.5.4
Bugfixes:
Removed spontaneous aero-spline warp drive in some Linux64 versions
0.14.4.1v------------------------------------
Features:
Added changes to blunt body drag to make command pods more stable on reentry
Attempt to account for most inaccurate effects of part clipping
0.14.4v------------------------------------
Features:
Default ActionGroups now controlled throuhg dropdown menus rather than string entry
Stability Deriv tab now takes entry in terms of planet, altitude and Mach Number, not density, temperature and Mach number
Stability Deriv tab now accounts for reduced gravity due to high speeds
Contributed by HoneyFox:
Pitch damper now has an additional gain for greater tuning
Control surfaces can now be set to deflect in response to local AoA changes
Control surfaces are not On/Off for a given control direction; can be scaled from -100% to 100% for each
Contributed by Bitronic:
Full Tweakscale Support
BugFixes:
Fixed no shielding with some payload fairings (particularly resized procedural fairings)
Fixed aero tinting blocking tinting from other mods
0.14.3.2v------------------------------------
Features:
Contributed by Da Michel:
Airspeed settings change readouts in cockpits
Bugfixes:
Fixed serious issues with the wing interaction code
Fixed an issue where wind velocity was applied in the opposite direction that was expected
0.14.3.1v------------------------------------
Features:
Improved performance in editor and flight for vessel configuration changes
Fliht GUI appears in mapview
Bugfixes:
Fixed neverending stall resulting from wing interactions with sudden changes in velocity vector direction
Fixed flight GUI issues when passing another vehicle
0.14.3v------------------------------------
Features:
Refactored wing interaction code:
Wing interactions should be smoother
Code should be less processor intensive
Upgrade to ModuleManager v2.5.1
Added stall visualization to aero force visualization
Added ability to scale wing mass up or down for additional strength / weight savings (addedby NathanKell)
Improved cargo bay and payload fairing detection algorithm
Tweaks:
Reduced intake drag
Decreased wing mass per area slightly
Bugfixes:
Fixed aero visualization leaving parachutes glowing brightly
Fixed some critical errors for when config files do not have values listed
Fixed an issue with AppLauncher buttons multiplying when KSP fails at loading a particular vessel
0.14.2v------------------------------------
Features:
0.25 compatibility, with stock support for SP+ parts
Upgrade CompatibilityChecker
Disable functions on CompatibilityChecker warnings
Prototype aero force visualization in flight
Removed vector from CoL indicator to reduce confusion
More Get functions for the FARAPI
Estimated range and endurance readouts in the Flight Data UI
See and dump FAR module data in the VAB / SPH using the Editor GUI
Some runtime optimizations
Contributed by Da Michel:
Implement separate deflection speeds for flaps / spoilers
Allow preferred default action groups for spoilers / flaps
Contributed by regex:
Add some RPM integration
Contributed by Ippo:
FARWind class for 3rd-party wind implementation
Bugfixes:
Fixed some vessel-switching FAR GUI issues
Fixed control surface reversal on undocking or backwards root part selection
Fixed some issues involving CoL position with wings when dealing with parts that have multiple colliders
Fixed some payload fairing and cargo bay part detection issues