This plugin adds a setting named "Z Offset" to the Build Plate Adhesion settings in the Custom print setup of Cura. Entering a positive value to in field will result in the head printing everything that amount further away from the build plate.
The Z Offset setting can be found in the Custom print setup by using the Search field on top of the settings. If you want to make the setting permanently visible in the sidebar, right click and select "Keep this setting visible".
The plugin adjusts the first move on the Z axis in the first layer by adding the Z offset value, and then instructs the printer to consider this the original first layer height. For example, layer 1 of a print with an Initial Layer Height of 0.25, and a Z Offset value of 0.05 may look like this:
...
;LAYER:0
M107
G0 F4320 X135.625 Y125.625 Z0.3 ;adjusted by z offset
G92 Z0.25 ;consider this the original z before offset
;TYPE:WALL-INNER
...Unfortunately this technique does not work for Ultimaker printers with firmware 5.2 or newer due to a bug in the firmware for those models. For those printers, the whole gcode file is processed to offset all moves that include a Z coordinate. This takes longer, but is otherwise functionally equivalent. Since some other printers also misbehave after using the G92 command, this alternative "extensive processing" method can now be selected as an additional setting for all printers.
With either method, the Z Offset can never be lower than the negative of the Initial Layer Height. That would result in a negative Z value, which at best would be caught by the firmware and result in an error during printing, and at worst would lead to the nozzle being pushed into the build plate, damaging the printer. So with an Initial Layer Height of 0.25, the Z Offset is limited to be -0.25 or higher.