This is for educational use only, bad things could happen if you run this on a real vehicle. Its meant to be used on indoor and/or small vehicles.
see http://fishpepper.de/projects/uSKY for more info
This hardware design uses some very bad hacks to archive the small package size, i would not recommend this to be used for a production run! Stick to the Application Notes from TI if you want to build a commercial device based on this. This layout will probably not pass anc compliance testing and depending on transmission laws in your country it is probably not allowed to be operated without further testing.
This work is published under the CERN open hardware license v1.2. Feel free to use the design - but make sure to give proper credit and release all modifications under the same license! See LICENSE.txt for details!
I AM NOT RESPONSIBLE FOR ANY DAMAGE/INJURIES CAUSED BY USING THIS DEVICE!
Make sure to init the git submodule for the libraries in kicad_misc by calling git submodule init && git submodule update
enjoy!