A bot to help people with their rental real-estate search. 🏠🤖
The rents are too high - you can't find a flat at a reasonable price in a place you actually want to live. Too many people apply for the good flats - you need to get apply very quickly to have any chance of getting a place. A bot seems like a good solution to this, but it's really just making things worse.
Use this bot to help with your flatsearch - it's a much better use of your time and resources than hitting refresh on a property portal every five minutes. Once you found a place for yourself, consider supporting alternatives like the Mietshäusersyndikat. The MHS projects (like the one I live in) are always looking for funding in the form of interest-bearing loans from individuals. If you have some thousand euros sitting around on your bank account, you can improve the housing situation in Germany and earn some interest on your savings by lending cash to one of the projects for a year or two.
Setting up this project on your local machine can be a bit complicated if you have no experience with Python. This README
is detailed, and there is a configuration wizard, but it's not super user-friendly. If you are searching for properties in Berlin, you can use the hosted version at https://flathunter.codders.de . You can login there with your Telegram ID and setup a basic search without downloading the project.
Flathunter is a Python application which periodically scrapes property listings sites, configured by the user, to find new rental real-estate listings, reporting them over messaging services.
Currently available messaging services are Telegram, Mattermost, Apprise and Slack.
There are at least four different rental property marketplace sites that are widely used in Germany - ImmoScout24, Immowelt, WG-Gesucht and Kleinanzeigen. Most people end up searching through listings on all four sites on an almost daily basis during their rental search. In Italy on the other hand, idealista, Subito and Immobiliare.it are very common for real-estate hunting.
With Flathunter
, instead of visiting the same pages on the same sites every day, you can set the system up to scan every site, filtering by your search criteria, and notify you when new rental property becomes available that meets your criteria.
Start by installing all dependencies inside a virtual environment using pipenv
from the project's directory:
$ pipenv install
(Note that the Pipfile.lock
shipped with the project is built on a Linux x86 system and installs packages from Pypi. If you are installing on a different platform with a different package repository, you may need to update the source URL in the Pipfile to point to your python package repository, and install using pipenv install --skip-lock
- see #314)
Once the dependencies are installed, as well as every time you come back to the project in a new shell, run:
$ pipenv shell
to launch a Python environment with the dependencies that your project requires. Now that you are inside the virtual environment, all commands you run in the shell will run with the required dependencies available
Before you run the program for the first time, you need to generate a configuration file. There is an example
file shipped with the project (config.yaml.dist
), but you can also use the configuration wizard to generate
a configuration for simple projects:
$ python config_wizard.py
The wizard will create a new config.yaml
file in the current working directory that you can use to run Flathunter:
$ python flathunt.py
To directly run the program without entering the venv first, use:
$ pipenv run python flathunt.py
(tested on CentOS Stream)
First clone the repository
$ cd /opt
$ git clone https://github.com/flathunters/flathunter.git
add a new User and configure the permissions
$ useradd -m flathunter
$ chown flathunter:flathunter -R flathunter/
Next install pipenv for the new user
$ sudo -u flathunter pip install --user pipenv
$ cd flathunter/
$ sudo -u flathunter /home/flathunter/.local/bin/pipenv install
Next configure the config file and service file to your liking. Then move the service file in place:
$ mv flathunter/sample-flathunter.service /lib/systemd/system/flathunter.service
At last you just have to start flathunter
$ systemctl enable flathunter --now
If you're using SELinux the following policy needs to be added:
$ chcon -R -t bin_t /home/flathunter/.local/bin/pipenv
Before running the project for the first time, you need to create a valid configuration file. You can
look at config.yaml.dist
to see an example config - copying that to config.yaml
and editing the urls
and telegram
sections will allow you to run Flathunter. Alternatively, you can use the configuration wizard
to generate a basic configuration:
$ python config_wizard.py
To configure the searches, simply visit the property portal of your choice (e.g. ImmoScout24), configure the search on the website to match your search criteria, then copy the URL of the results page into the config file. You can add as many URLs as you like, also multiple from the same website if you have multiple different criteria (e.g. running the same search in different areas).
To be able to send messages to you over Telegram, you need to register a new bot with the BotFather for Flathunter
to use. Through this process, a "Bot Token" will be created for you, which should be configured under bot_token
in the config file.
To know who should Telegram messages should be sent to, the "Chat IDs" of the recipients must be added to the config file under receiver_ids
. To work out your own Chat ID, send a message to your new bot, then run:
$ curl https://api.telegram.org/bot[BOT-TOKEN]/getUpdates
to get list of messages the Bot has received. You will see your Chat ID in there.
Some sites (including Kleinanzeigen and ImmoScout24) implement bot detection to prevent scripts from scraping their sites. Flathunter includes support for running a headless Chrome browser to simulate human requests to the websites. For crawling Kleinanzeigen and ImmoScout24, you will need to install Google Chrome
Some sites (including ImmoScout24) implement a Captcha to avoid being crawled by evil web scrapers. Since our crawler is not an evil one, the people at 2Captcha and Imagetyperz provide services that help you solve them. You can head over to one of those services and buy some credit for captcha solving. You will need to install the API key for your captcha-solving account in the config.yaml
. Check out config.yaml.dist
to see how to configure 2Captcha
or Imagetyperz
with Flathunter. At this time, ImmoScout24 can not be crawled by Flathunter without using 2Captcha/Imagetyperz. Buying captcha solutions does not guarantee that you will get past the ImmoScout24 bot detection (see #296, #302).
You may find that even with the Captcha-solving support, your browser is detected as a bot. In this case, as a short-term fix, you can visit the ImmoScout website with your normal web-browser - actual humans generally pass the bot detection - and copy the reese84
cookie into your Flathunter config file:
immoscout_cookie: 2:pJP9F...OU4Q=
This should allow you to bypass the bot detection for a short period of time, but you will need periodically to get a new cookie.
It's common that websites use bots and crawler protections to avoid being flooded with possibly malicious traffic. This can cause some issues when crawling, as we will be presented with a bot-protection page.
To circumvent this, we can enable proxies with the configuration key use_proxy_list
and setting it to True
.
Flathunt will crawl a free-proxy list website to retrieve a list of possible proxies to use, and cycle through the so obtained list until an usable proxy is found.
Note: there may be a lot of attemps before such an usable proxy is found. Depending on your region or your server's internet accessibility, it can take a while.
To use the distance calculation feature a Google API-Key is needed, as well as to enable the Distance Matrix API (This is NOT free).
By default, the application runs on the commandline and outputs logs to stdout
. It will poll in a loop and send updates after each run. The processed_ids.db
file contains details of which listings have already been sent to the Telegram bot - if you delete that, it will be recreated, and you may receive duplicate listings.
usage: flathunt.py [-h] [--config CONFIG]
Searches for flats on Immobilienscout24.de and wg-gesucht.de and sends results
to Telegram User
optional arguments:
-h, --help show this help message and exit
--config CONFIG, -c CONFIG
Config file to use. If not set, try to use
'~git-clone-dir/config.yaml'
--heartbeat INTERVAL, -hb INTERVAL
Set the interval time to receive heartbeat messages to check that the bot is
alive. Accepted strings are "hour", "day", "week". Defaults to None.
You can alternatively launch the web interface by running the main.py
application:
$ python main.py
This uses the same config file as the Command-line Interface, and launches a web page at http://localhost:8080.
Alternatively, run the server directly with Flask:
$ FLASK_APP=flathunter.web flask run
You can either use just Docker or Docker Compose to run the app containerized. We recommend Docker Compose for easier configuration.
config.yaml
file (see Configuration) or adjust the environment variables in the docker-compose.yaml
file (see Environment Configuration). You can also combine both options, but in this case the environment variables have priority.docker-compose build
docker-compose up
First build the image inside the project's root directory:
$ docker build -t flathunter .
When running a container using the image, a config file needs to be mounted on the container at /config.yaml
or configuration has to be supplied using environment variables. The example below provides the file config.yaml
off the current working directory:
$ docker run --mount type=bind,source=$PWD/config.yaml,target=/config.yaml flathunter python flathunt.py -c /config.yaml
To make deployment with docker easier, most of the important configuration options can be set with environment variables. The current list of recognised variables includes:
#CR#
will be replaced by newlinetelegram,mattermost,slack
)You can run Flathunter
on Google's App Engine, in the free tier, at no cost if you don't need captcha solving. If you need to solve captchas, you can use Google Cloud Run as described later. To get started, first install the Google Cloud SDK on your machine, and run:
$ gcloud init
to setup the SDK. You will need to create a new cloud project (or connect to an existing project). The Flathunters organisation uses the flathunters
project ID to deploy the application. If you need access to deploy to that project, contact the maintainers.
$ gcloud config set project flathunters
You will need to provide the project ID to the configuration file config.yaml
as value to the key google_cloud_project_id
or in the FLATHUNTER_GOOGLE_CLOUD_PROJECT_ID
environment variable.
Google Cloud doesn't currently support Pipfiles. To work around this restriction, the Pipfile
and Pipfile.lock
have been added to .gcloudignore
, and a requirements.txt
file has been generated using pip freeze
.
If the Pipfile has been updated, you will need to remove the line pkg-resources==0.0.0
from requirements.txt
for a successful deploy.
To deploy the app to Google App Engine, run:
$ gcloud app deploy
Your project will need to have the Cloud Build API enabled, which requires it to be linked to a billing-enabled account. It also needs Cloud Firestore API to be enabled for the project. Firestore needs to be configured in Native mode.
Instead of running with a timer, the web interface depends on periodic calls to the /hunt
URL to trigger searches (this avoids the need to have a long-running process in the on-demand compute environment). You can configure Google Cloud to automatically hit the URL by deploying the cron job:
$ gcloud app deploy cron.yaml
If you need captcha support (for example to scrape Immoscout), you will need to deploy using Google Cloud Run, so that you can embed the Chrome browser and Selenium Webdriver in the docker image. A seperate Dockerfile.gcloud.job
exists for this purpose.
First, ensure that requirements.txt
has been created (per Google Cloud Deployment), then either run:
docker build -t flathunter-job -f Dockerfile.gcloud.job .
to build the docker image locally, or edit the cloudbuild.yaml
file to point to the container registry for your own Google Cloud Project, and run:
gcloud builds submit --region=europe-west1
to have Google Cloud Build build and tag the image for you.
You will need to create a new Google Cloud Run Job to execute the crawl/notify. The job should be configured with 1GB of memory and 1 CPU, and the environment variables to should be set appropriately.
You can trigger the job using Google Cloud Scheduler, using an HTTP POST to:
https://[REGION]-run.googleapis.com/apis/run.googleapis.com/v1/namespaces/[PROJECT_ID]/jobs/[JOB_NAME]:run
For more information checkout the Cloud Scheduler documentation.
Because the image uses Firestore to read details of user notification preferences and store crawled exposes, the job can run without any additional configuration. If you are hosting the webinterface somewhere on Google Cloud (either App Engine or Google Cloud Run), the job here will find the appropriate Firebase database.
The test suite can be run with pytest
:
$ pytest
from the project root. If you encounter the error ModuleNotFoundError: No module named 'flathunter'
, run:
$ pip install -e .
to make the current project visible to your pip environment.
This project is maintained by the members of the Flat Hunters Github organisation, which is a collection of individual unpaid volunteers who have all had their own processes with flat-hunting in Germany. If you want to join, just ping one of us a message!
The original code was contributed by @NodyHub, whose original idea this project was.
Other contributions were made along the way by:
If you want to make a contribution, please check out the contributor code of conduct (EN 🇬🇧/DE 🇩🇪) first. Pull requests are very welcome, as are issues. If you file an issue, please include as much information as possible about how to reproduce the issue.