This Repository was created to share the setup of the pictures entity card to emulate/imitate the Waterkotte heatpump display overview in Home Assistant. All but 2 sensors in use are originating from the below linked Waterkotte Integration. My heatpump setup is pretty simple: A1 Geo EcoTouch, no additional buffer or functions - apart from SG ready. SG ready was realized with a Shelly Plus 1 which I directly connected via 230V inside the Heatpump and connected to SG-ready input.
These are the 2 Display screens that shall be condensed into 1 card.
This is how the Card looks like:
Functions/features:
Install the following integration via HACS https://github.com/marq24/ha-waterkotte
Install the Card-mod Frontend via HACS https://github.com/thomasloven/lovelace-card-mod
Create a new card on the dashboard, switching to YML-mode. Copy code from waterkotte.yml and paste.
Additional entities There are several entities that are not originating from the Waterkotte integration. These are marked with comments in the waterkotte.yml
Navigation paths Navigation paths need to be adjusted according to the dashboard layout, I have not included any sub-pages as these are very basic.
Calculated sensors