search

francoismichel / ssh3

SSH3: faster and rich secure shell using HTTP/3, checkout our article here: https://arxiv.org/abs/2312.08396 and our Internet-Draft: https://datatracker.ietf.org/doc/draft-michel-ssh3/
https://arxiv.org/abs/2312.08396
Apache License 2.0
3.29k stars 84 forks source link

readme

[!NOTE] SSH3 is probably going to change its name. It is still the SSH Connection Protocol (RFC4254) running on top of HTTP/3 Extended connect, but the required changes are heavy and too distant from the philosophy of popular SSH implementations to be considered for integration. The specification draft has already been renamed ("Remote Terminals over HTTP/3"), but we need some time to come up with a nice permanent name.

SSH3: faster and rich secure shell using HTTP/3

SSH3 is a complete revisit of the SSH protocol, mapping its semantics on top of the HTTP mechanisms. It comes from our research work and we (researchers) recently proposed it as an Internet-Draft (draft-michel-remote-terminal-http3-00).

In a nutshell, SSH3 uses QUIC+TLS1.3 for secure channel establishment and the HTTP Authorization mechanisms for user authentication. Among others, SSH3 allows the following improvements:

[!TIP] Quickly want to get started ? Checkout how to install SSH3. You will learn to setup an SSH3 server and use the SSH3 client.

⚡ SSH3 is faster

Faster for session establishment, not throughput ! SSH3 offers a significantly faster session establishment than SSHv2. Establishing a new session with SSHv2 can take 5 to 7 network round-trip times, which can easily be noticed by the user. SSH3 only needs 3 round-trip times. The keystroke latency in a running session is unchanged.

SSH3 (top) VS SSHv2 (bottom) session establishement with a 100ms ping towards the server.

🔒 SSH3 security

While SSHv2 defines its own protocols for user authentication and secure channel establishment, SSH3 relies on the robust and time-tested mechanisms of TLS 1.3, QUIC and HTTP. These protocols are already extensively used to secure security-critical applications on the Internet such as e-commerce and Internet banking.

SSH3 already implements the common password-based and public-key (RSA and EdDSA/ed25519) authentication methods. It also supports new authentication methods such as OAuth 2.0 and allows logging in to your servers using your Google/Microsoft/Github accounts.

🧪 SSH3 is still experimental

While SSH3 shows promise for faster session establishment, it is still at an early proof-of-concept stage. As with any new complex protocol, expert cryptographic review over an extended timeframe is required before reasonable security conclusions can be made.

We are developing SSH3 as an open source project to facilitate community feedback and analysis. However, we cannot yet endorse its appropriateness for production systems without further peer review. Please collaborate with us if you have relevant expertise!

🥷 Do not deploy the SSH3 server on your production servers for now

Given the current prototype state, we advise testing SSH3 in sandboxed environments or private networks. Be aware that making experimental servers directly Internet-accessible could introduce risk before thorough security vetting.

While hiding servers behind secret paths has potential benefits, it does not negate the need for rigorous vulnerability analysis before entering production. We are excited by SSH3's future possibilities but encourage additional scrutiny first.

🥷 Your SSH3 public server can be hidden

Using SSH3, you can avoid the usual stress of scanning and dictionary attacks against your SSH server. Similarly to your secret Google Drive documents, your SSH3 server can be hidden behind a secret link and only answer to authentication attempts that made an HTTP request to this specific link, like the following:

ssh3-server -bind 192.0.2.0:443 -url-path <my-long-secret>

By replacing <my-long-secret> by, let's say, the random value M3MzkxYWMxMjYxMjc5YzJkODZiMTAyMjU, your SSH3 server will only answer to SSH3 connection attempts made to the URL https://192.0.2.0:443/M3MzkxYWMxMjYxMjc5YzJkODZiMTAyMjU and it will respond a 404 Not Found to other requests. Attackers and crawlers on the Internet can therefore not detect the presence of your SSH3 server. They will only see a simple web server answering 404 status codes to every request.

NOTE WELL: placing your SSH3 server behind a secret URL may reduce the impact of scanning attacks but will and must never replace classical authentication mechanisms. The secret link should only be used to avoid your host to be discovered. Knowing the secret URL should not grant someone access to your server. Use the classical authentication mechanisms described above to protect your server.

💐 SSH3 is already feature-rich

SSH3 provides new feature that could not be provided by the SSHv2 protocol.

Brand new features

Famous OpenSSH features implemented

This SSH3 implementation already provides many of the popular features of OpenSSH, so if you are used to OpenSSH, the process of adopting SSH3 will be smooth. Here is a list of some OpenSSH features that SSH3 also implements:

🙏 Community support

Help us progress SSH3 responsibly! We welcome capable security researchers to review our codebase and provide feedback. Please also connect us with relevant standards bodies to potentially advance SSH3 through the formal IETF/IRTF processes over time.

With collaborative assistance, we hope to iteratively improve SSH3 towards safe production readiness. But we cannot credibly make definitive security claims without evidence of extensive expert cryptographic review and adoption by respected security authorities. Let's work together to realize SSH3's possibilities!

Installing SSH3

You can either download the last release binaries, install it using go install or generate these binaries yourself by compiling the code from source.

[!TIP] SSH3 is still experimental and is the fruit of a research work. If you are afraid of deploying publicly a new SSH3 server, you can use the secret path feature of SSH3 to hide it behing a secret URL.

Installing ssh3 and ssh3-server using Go install

go install github.com/francoismichel/ssh3/cmd/...@latest

Compiling SSH3 from source

You need a recent Golang version to do this. Downloading the source code and compiling the binaries can be done with the following steps:

git clone https://github.com/francoismichel/ssh3    # clone the repo
cd ssh3
go build -o ssh3 cmd/ssh3/main.go                        # build the client
CGO_ENABLED=1 go build -o ssh3-server cmd/ssh3-server/main.go   # build the server, requires having gcc installed

If you have root/sudo privileges and you want to make ssh3 accessible to all you users, you can then directly copy the binaries to /usr/bin:

cp ssh3 /usr/bin/ && cp ssh3-server /usr/bin

Otherwise, you can simply add the executables to your PATH environment variable by adding the following line at the end of your .bashrc or equivalent:

export PATH=$PATH:/path/to/the/ssh3/directory

Deploying an SSH3 server

Before connecting to your host, you need to deploy an SSH3 server on it. There is currently no SSH3 daemon, so right now, you will have to run the ssh3-server executable in background using screen or a similar utility.

[!NOTE] As SSH3 runs on top of HTTP/3, a server needs an X.509 certificate and its corresponding private key. Public certificates can be generated automatically for your public domain name through Let's Encrypt using the -generate-public-cert command-line argument on the server. If you do not want to generate a certificate signed by a real certificate authority or if you don't have any public domain name, you can generate a self-signed one using the -generate-selfsigned-cert command-line argument. Self-signed certificates provide you with similar security guarantees to SSHv2's host keys mechanism, with the same security issue: you may be vulnerable to machine-in-the-middle attacks during your first connection to your server. Using real certificates signed by public certificate authorities such as Let's Encrypt avoids this issue.

Here is the usage of the ssh3-server executable:

Usage of ./ssh3-server:
  -bind string
        the address:port pair to listen to, e.g. 0.0.0.0:443 (default "[::]:443")
  -cert string
        the filename of the server certificate (or fullchain) (default "./cert.pem")
  -key string
        the filename of the certificate private key (default "./priv.key")
  -enable-password-login
        if set, enable password authentication (disabled by default)
  -generate-public-cert value
        Automatically produce and use a valid public certificate usingLet's Encrypt for the provided domain name. The flag can be used several times to generate several certificates.If certificates have already been generated previously using this flag, they will simply be reused without being regenerated. The public certificates are automatically renewed as long as the server is running. Automatically-generated IP public certificates are not available yet.
  -generate-selfsigned-cert
        if set, generates a self-self-signed cerificate and key that will be stored at the paths indicated by the -cert and -key args (they must not already exist)
  -url-path string
        the secret URL path on which the ssh3 server listens (default "/ssh3-term")
  -v    verbose mode, if set
  -version
        if set, displays the software version on standard output and exit

The following command starts a public SSH3 server on port 443 with a valid Let's Encrypt public certificate for domain my-domain.example.org and answers to new sessions requests querying the /ssh3 URL path:

ssh3-server -generate-public-cert my-domain.example.org -url-path /ssh3

If you don't have a public domain name (i.e. only an IP address), you can either use an existing certificate for your IP address using the -cert and -key arguments or generate a self-signed certificate using the -generate-selfsigned-cert argument.

If you have existing certificates and keys, you can run the server as follows to use them=

ssh3-server -cert /path/to/cert/or/fullchain -key /path/to/cert/private/key -url-path /ssh3

[!NOTE] Similarly to OpenSSH, the server must be run with root priviledges to log in as other users.

Authorized keys and authorized identities

By default, the SSH3 server will look for identities in the ~/.ssh/authorized_keys and ~/.ssh3/authorized_identities files for each user. ~/.ssh3/authorized_identities allows new identities such as OpenID Connect (oidc) discussed below. Popular key types such as rsa, ed25519 and keys in the OpenSSH format can be used.

Using the SSH3 client

Once you have an SSH3 server running, you can connect to it using the SSH3 client similarly to what you did with your classical SSHv2 tool.

Here is the usage of the ssh3 executable:

Usage of ssh3:
  -pubkey-for-agent string
        if set, use an agent key whose public key matches the one in the specified path
  -privkey string
        private key file
  -use-password
        if set, do classical password authentication
  -forward-agent
        if set, forwards ssh agent to be used with sshv2 connections on the remote host
  -forward-tcp string
        if set, take a localport/remoteip@remoteport forwarding localhost@localport towards remoteip@remoteport
  -forward-udp string
        if set, take a localport/remoteip@remoteport forwarding localhost@localport towards remoteip@remoteport
  -proxy-jump string
        if set, performs a proxy jump using the specified remote host as proxy
  -insecure
        if set, skip server certificate verification
  -keylog string
        Write QUIC TLS keys and master secret in the specified keylog file: only for debugging purpose
  -use-oidc string
        if set, force the use of OpenID Connect with the specified issuer url as parameter
  -oidc-config string
        OpenID Connect json config file containing the "client_id" and "client_secret" fields needed for most identity providers
  -do-pkce
        if set, perform PKCE challenge-response with oidc
  -v    if set, enable verbose mode

Private-key authentication

You can connect to your SSH3 server at my-server.example.org listening on /my-secret-path using the private key located in ~/.ssh/id_rsa with the following command:

  ssh3 -privkey ~/.ssh/id_rsa username@my-server.example.org/my-secret-path

Agent-based private key authentication

The SSH3 client works with the OpenSSH agent and uses the classical SSH_AUTH_SOCK environment variable to communicate with this agent. Similarly to OpenSSH, SSH3 will list the keys provided by the SSH agent and connect using the first key listen by the agent by default. If you want to specify a specific key to use with the agent, you can either specify the private key directly with the -privkey argument like above, or specify the corresponding public key using the -pubkey-for-agent argument. This allows you to authenticate in situations where only the agent has a direct access to the private key but you only have access to the public key.

Password-based authentication

While discouraged, you can connect to your server using passwords (if explicitly enabled on the ssh3-server) with the following command:

  ssh3 -use-password username@my-server.example.org/my-secret-path

Config-based session establishment

ssh3 parses your OpenSSH config. Currently, it only handles the Hostname; User, Port and IdentityFile OpenSSH options. It also adds new option only used by SSH3, such as URLPath or UDPProxyJump. URLPath allows you to omit the secret URL path in your SSH3 command. UDPProxyJump allows you to perform SSH3 (#proxy-jump)[Proxy Jump] and has the same meaning as the -proxy-jump command-line argument. Let's say you have the following lines in your OpenSSH config located in ~/.ssh/config :

IgnoreUnknown URLPath
Host my-server
  HostName 192.0.2.0
  User username
  IdentityFile ~/.ssh/id_rsa
  URLPath /my-secret-path

Similarly to what OpenSSH does, the following ssh3 command will connect you to the SSH3 server running on 192.0.2.0 on UDP port 443 using public key authentication with the private key located in .ssh/id_rsa :

  ssh3 my-server/my-secret-path

If you do not want a config-based utilization of SSH3, you can read the sections below to see how to use the CLI parameters of ssh3.

OpenID Connect authentication (still experimental)

This feature allows you to connect using an external identity provider such as the one of your company or any other provider that implements the OpenID Connect standard, such as Google Identity, Github or Microsoft Entra. The authentication flow is illustrated in the GIF below.

*Secure connection without private key using a Google account.*

The way it connects to your identity provider is configured in a file named ~/.ssh3/oidc_config.json. Below is an example config.json file for use with a Google account. This configuration file is an array and can contain several identity providers configurations.

[
    {
        "issuer_url": "https://accounts.google.com",
        "client_id": "<your_client_id>",
        "client_secret": "<your_client_secret>"
    }
]

This might change in the future, but currently, to make this feature work with your Google account, you will need to setup a new experimental application in your Google Cloud console and add your email as authorized users. This will provide you with a client_id and a client_secret that you can then set in your ~/.ssh3/oidc_config.json. On the server side, you just have to add the following line in your ~/.ssh3/authorized_identities:

oidc <client_id> https://accounts.google.com <email>

We currently consider removing the need of setting the client_id in the authorized_identities file in the future.

Proxy jump

It is often the case that some SSH hosts can only be accessed through a gateway. SSH3 allows you to perform a Proxy Jump similarly to what is proposed by OpenSSH. You can connect from A to C using B as a gateway/proxy. B and C must both be running a valid SSH3 server. This works by establishing UDP port forwarding on B to forward QUIC packets from A to C. The connection from A to C is therefore fully end-to-end and B cannot decrypt or alter the SSH3 traffic between A and C.