Set up a Highly Available Kubernetes Cluster using kubeadm

Follow this documentation to set up a highly available Kubernetes cluster using Ubuntu 20.04 LTS.

This documentation guides you in setting up a cluster with two master nodes, two worker nodes and a load balancer node using HAProxy.

Environment

• Perform all the commands as root user unless otherwise specified

Set up load balancer node

Install Haproxy

apt update && apt install -y haproxy

Configure haproxy

Append the below lines to /etc/haproxy/haproxy.cfg

frontend kubernetes-frontend
    bind 10.0.1.84:6443
    mode tcp
    option tcplog
    default_backend kubernetes-backend

backend kubernetes-backend
    mode tcp
    option tcp-check
    balance roundrobin
    server kmaster1 10.0.1.24:6443 check fall 3 rise 2
    server kmaster2 10.0.1.100:6443 check fall 3 rise 2

Restart haproxy service

systemctl restart haproxy

On all kubernetes nodes (kmaster1, kmaster2, kworker1, kworker2)

Disable Firewall

ufw disable

Disable swap

swapoff -a; sed -i '/swap/d' /etc/fstab

Update sysctl settings for Kubernetes networking

cat >>/etc/sysctl.d/kubernetes.conf<<EOF
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
EOF
sysctl --system

Install docker engine

{
  apt install -y apt-transport-https ca-certificates curl gnupg-agent software-properties-common
  curl -fsSL https://download.docker.com/linux/ubuntu/gpg | apt-key add -
  add-apt-repository "deb [arch=amd64] https://download.docker.com/linux/ubuntu $(lsb_release -cs) stable"
  apt update && apt install -y docker-ce=5:19.03.10~3-0~ubuntu-focal containerd.io
}

Kubernetes Setup

Add Apt repository

{
  curl -s https://packages.cloud.google.com/apt/doc/apt-key.gpg | apt-key add -
  echo "deb https://apt.kubernetes.io/ kubernetes-xenial main" > /etc/apt/sources.list.d/kubernetes.list
}

Install Kubernetes components

apt update && apt install -y kubeadm=1.19.2-00 kubelet=1.19.2-00 kubectl=1.19.2-00

On any one of the Kubernetes master node (Eg: kmaster1)

Initialize Kubernetes Cluster

kubeadm init --control-plane-endpoint="10.0.1.84:6443" --upload-certs --apiserver-advertise-address=10.0.1.24 --pod-network-cidr=192.168.0.0/16

Copy the commands to join other master nodes and worker nodes.

Deploy Calico network

kubectl --kubeconfig=/etc/kubernetes/admin.conf create -f https://docs.projectcalico.org/v3.15/manifests/calico.yaml

Join other nodes to the cluster (kmaster2 & kworker1, kworker2)

Use the respective kubeadm join commands you copied from the output of kubeadm init command on the first master.

IMPORTANT: You also need to pass --apiserver-advertise-address to the join command when you join the other master node.

Downloading kube config to your local machine

On your host machine

mkdir ~/.kube
scp root@10.0.1.24:/etc/kubernetes/admin.conf ~/.kube/config

Verifying the cluster

kubectl cluster-info
kubectl get nodes
kubectl get cs

Have Fun!!