search

frawe / EasyControls3_homeassistant

6 stars 2 forks source link

Tested/Used firmeware and devices #9

Open frawe opened 1 week ago

frawe commented 1 week ago

This issue should be used to collect supported firmware versions and devices.

I have a KWL 360 W ET running currently 1.0.19.

zsolth commented 1 week ago

KWL 500 W L on 1.0.9

zsolth commented 1 week ago

This issue should be used to collect supported firmware versions and devices.

I have a KWL 360 W ET running currently 1.0.19.

Super sorry to hijack this thread here, but I figrued I'd ask, is the enthalpy heat exchanger worth investing in? We're using the 500W (with basic HE) and relative humidity gets up to 70% in the summer (as we're colling with surface cooling that doesn't solve humidity issues like an AC) and down to 30% in the winter and was wondering if the enalphy component (which can be retrofitted, I've checked) would solve this problem (or at least make the situation less bad)...

frawe commented 1 week ago

maybe we could switch over to https://community.home-assistant.io/t/re-helios-easycontrol-3-0-to-homeassistant-mqtt/778285/5 (you should be able to find me there and write me a message)

or also post in the public thread

then others also can find it and read it - and this can be keeped clean ;)

sanchosk commented 3 days ago

KWL 300 W ET L 1.0.17

Minor issue here - the HA only recognized 4 entities... image

frawe commented 3 days ago

That is sad to here 😢

Did you add the integration newly or updated?

Did you also tried to restart home assistant?

sanchosk commented 3 days ago

Installed using adding repo to HACS, setting version to 1.3, restarted HA after install, provided IP address (did not worked with DNS, reported unable to connect). Did not tried to restart after that, but I can give it a go.

sanchosk commented 3 days ago

Hey! I was skeptical, but a promise is a promise. And voila! image

frawe commented 3 days ago

great to see 😄

i will look into that, to see if I can find a reason for that...