easyControls 3.0 to homeassistant for Home Assistant
Big thank you at sanchosk for his initial work (https://github.com/sanchosk/helios2mqtt)
Information
Current Version 1.3.0
Installation
Via HACS custom repo (not tested at the moment), or copy the folder EasyControls3_homeassistant directly into your custom_components directory (if not available, create one under our conf directory)
The integration could be set up completely from UI. After the repo is under custom_components the integration should be found via EasyControls3_homeassistant (sorry for the name)
It only needs the ip address (e.g. 10.0.0.42) to find it
Current state
Communication is working via WebSocket, so the integration should work with EasyControls 3.x version devices (pleas see issues for a list of tested devices and firmwares).
Supported Features:
- Sensors for temperature values (indoor, outside, supply, exhaust)
- Sensor for last time of filter change as well as one for the next change
- Sensor for current fan speed
- Sensor for relative humidity
- Sensor for CO2 sensor (if it is available in the KWL)
- Time entity to set the Intensive mode duration (it also shows the current set value)
- Number entity to set the Fan speed for AtHome, Away and Intensive (it also shows the current set value)
- Select entity to change the KWL Mode (it also shows the current set value)
- A switch Entity to turn the KWL ON/OFF
The integration uses the serial number of the device to assign uniq ids to the sensors.
Pictures
Integration overview
Entities overview
Possible UI
