This repository is a docker compose version of free5GC for stage 3. It's inspired by free5gc-docker-compose and also reference to docker-free5gc.
You can setup your own config in config folder and docker-compose.yaml
Note: AVX for MongoDB: some HW does not support MongoDB releases above4.4
due to use of the new AVX instructions set. To verify if your CPU is compatible you can check CPU flags by running grep avx /proc/cpuinfo
. A workaround is suggested here.
Because we need to create tunnel interface, we need to use privileged container with root permission.
docker compose pull
# Clone the project
git clone https://github.com/free5gc/free5gc-compose.git
cd free5gc-compose
# clone free5gc sources
cd base
git clone --recursive -j `nproc` https://github.com/free5gc/free5gc.git
cd ..
# Build the images
make all
docker compose -f docker-compose-build.yaml build
# Alternatively you can build specific NF image e.g.:
make amf
docker compose -f docker-compose-build.yaml build free5gc-amf
Note:
Dangling images may be created during the build process. It is advised to remove them from time to time to free up disk space.
docker rmi $(docker images -f "dangling=true" -q)
You can create free5GC containers based on local images or docker hub images:
# use local images
docker compose -f docker-compose-build.yaml up
# use images from docker hub
docker compose up # add -d to run in background mode
Destroy the established container resource after testing:
# Remove established containers (local images)
docker compose -f docker-compose-build.yaml rm
# Remove established containers (remote images)
docker compose rm
Sometimes, you need to drop data from DB:
docker exec -it mongodb mongosh
> use free5gc
> db.dropDatabase()
> exit # (Or Ctrl-D)
You can see logs for each service using docker logs
command. For example, to access the logs of the SMF you can use:
docker logs smf
Please refer to the wiki for more troubleshooting information.
The integration with the UERANSIM eNB/UE simulator is documented here.
This issue provides detailed steps that might be useful.
You can launch a UE using:
docker exec -it ueransim bash
root@host:/ueransim# ./nr-ue -c config/uecfg.yaml
By default, the provided UERANSIM service on this docker-compose.yaml
will only act as a gNB. If you want to create a UE you'll need to:
UE ID
fieldsupi
in config/uecfg.yaml
to the UE ID that you just copiedlinkIp
in config/gnbcfg.yaml
to gnb.free5gc.org
(which is also present in the gnbSearchList
in config/uecfg.yaml
) to enable communication between the UE and gNB servicesdocker-compose.yaml
as it follows:ue:
container_name: ue
image: free5gc/ueransim:latest
command: ./nr-ue -c ./config/uecfg.yaml
volumes:
- ./config/uecfg.yaml:/ueransim/config/uecfg.yaml
cap_add:
- NET_ADMIN
devices:
- "/dev/net/tun"
networks:
privnet:
aliases:
- ue.free5gc.org
depends_on:
- ueransim
docker-compose.yaml
You can check this issue for some sample configuration files of srsRAN + free5GC
Here you can find helpful guidelines on the integration of Nginx reverse proxy to set it in front of the WebUI: https://github.com/free5gc/free5gc-compose/issues/55#issuecomment-1146648600
To start the core with a I-UPF and PSA-UPF ULCL configuration, use
docker compose -f docker-compose-ulcl.yaml up
Note: This configuration have been tested using release free5gc-compose v3.4.3
Check out the used configuration files at config/ULCL
.