It is an attempt to answer the question "Is my IPA server installation working properly."
Major pain points in an IPA server installation were identified and tests written to verify that the system is configured or running with expected settings.
The major areas currently covered are:
The simplest way to use Healthcheck is to run it from the command-line as root as ipa-healthcheck. Running from the command-line will display the output to the console unless --output-file=FILENAME is used. There is output for all tests so we can be sure that an error condition isn't providing a false positive. The command-line option --failures-only will skip printing the SUCCESS conditions. If running in a tty and not using --output-file then --failures-only defaults to True. The --all option will display all output if you want/need it.
Healthcheck is designed only to be run on IPA servers. It only checks for issues on the server it is executed on.
To automate running Healthcheck every day a systemd timer can be used.
The default destination directory for healthcheck logs is /var/log/ipa/healthcheck
and this can be the input into a monitoring system to track changes over time or to alert if a test goes from working to error or warning.
A systemd timer is provided but is not enabled by default. To enable it:
# systemctl enable ipa-healthcheck.timer
# systemctl start ipa-healthcheck.timer
logrotate will handle log rotation and keep up to 30 days of history.
This can be configured via the /etc/logrotate.d/ipahealthcheck
file.
If using upstream or if your distribution's package does not include the timer, it can be installed manually as follows.
First create the destination log directory:
# mkdir /var/log/ipa/healthcheck
Then copy the systemd configuration into place:
# cp systemd/ipa-healthcheck.timer /usr/lib/systemd/system
# cp systemd/ipa-healthcheck.service /usr/lib/systemd/system
Put a shell script in place to do the invocation:
# cp systemd/ipa-healthcheck.sh /usr/libexec/ipa
Tell systemd about it and enable it:
# systemctl daemon-reload
# systemctl enable ipa-healthcheck.timer
# systemctl start ipa-healthcheck.timer
Finally add a proper logrotate configuration:
# cp logrotate/ipahealthcheck /etc/logrotate.d/
Note that logrotate requires crond to be started+enabled.
To test:
# systemctl start ipa-healthcheck
In general the output should contain enough information to provide a basic idea of why it is considered an error. If a specific value is expected then that will be provided along with the observed value. For example a number of files are checked for owner, group and permissions. If a value differs from the expected value then the expected and got values will be reported.
Running from the command-line will aid in ensuring that the condition is correct to what is expected. The basic idea is that it would be iterative:
Repeat until until no errors are reported.
It is possible that some tests will need to be tweaked to accommodate real world situations. If you observe false positives then please open an issue at https://github.com/freeipa/freeipa-healthcheck/issues
There is no way to suppress an error without making a change either in the test or in the system to accommodate the test requirements.
In order to gauge the health of a system one needs to check any number of things.
These things, or checks, can be logically grouped together. This is a source. A source consists of 1..n checks.
A check should be as atomic as possible to limit the scope and complexity, ideally returning a yes/no whether the check passes or fails. This is not always possible and that's ok.
At a higher level than source is product. The hierarchy looks like:
ipahealthcheck
product
source
check
check
...
source
check
...
A source provides a registry so its checks are discoverable.
The base class for a check is ipahealthcheck.core.plugin::Plugin
The only method that needs to be implemented is check(). This implements the test against the system and should yield a Result object. Because check() is a generator multiple results can be yielded from a single check.
Typically each source defines its own plugin.py which contains the registry. This looks like:
from ipahealthcheck.core.plugin import Registry
registry = Registry()
A basic check module consists of:
from ipahealthcheck.core.plugin import Plugin, Result
from ipahealthcheck.core import constants
from ipahealthcheck.mymodule.plugin import registry
@registry
class MyPlugin(Plugin):
def check(self):
yield Result(self, constants.SUCCESS)
A check yields a Result. This contains the outcome of the check including:
The kw dict is meant to provide context for the check. Err on the side of too much information.
Some predefined keys of the kw dictionary are:
kw is optional if result is SUCCESS.
If a check consist of only a single test then it is not required to yield a Result, one marking the check as successful will be added automatically.
If a check is complex enough that it checks multiple values then it should yield a SUCCESS Result() for each one.
A Result is required for every test done so that one can know that the check was executed.
The run time duration of each check will be calculated. The mechanism differs depending on complexity.
A check should normally use the @duration decorator to track the duration it took to execute the check.
@registry
class MyPlugin(Plugin):
@duration
def check(self):
yield Result(self, constants.SUCCESS)
The list of sources is stored in setup.py in the top-level of the tree.
Assuming it is contained in-tree it takes the form of:
'ipahealthcheck.
For example, to add replication to the src/ipahealthcheck/ipa directory
'ipahealthcheck.ipa': [
'ipacerts = ipahealthcheck.ipa.certs',
'ipafiles = ipahealthcheck.ipa.files',
'ipakerberos = ipahealthcheck.ipa.kerberos',
'replication = ipahealthcheck.ipa.replication',
],
If a new branch of sources is added a new registry is needed. This is added into the ipahealthcheck.registry section in setup.py. If we decided that replication didn't belong under ipahealthcheck.ipa but instead in ipahealthcheck.ds it would look like:
'ipahealthcheck.registry': [
'ipahealthcheck.ipa = ipahealthcheck.ipa.plugin:registry',
'ipahealthcheck.dogtag = ipahealthcheck.dogtag.plugin:registry',
'ipahealthcheck.meta = ipahealthcheck.meta.plugin:registry',
'ipahealthcheck.ds = ipahealthcheck.ds.plugin:registry',
],
and
'ipahealthcheck.ds': [
'replication = ipahealthcheck.ds.replication',
],
It is possible to execute a single check or all checks in a single source by passing --source and/or --check on the command-line. This is intended to help user's quickly ensure that something is fixed by re-running a check after making a change.
--source
, when used on its own i.e. without --check
, can also
accept a module namespace and all sources within that namespace
shall be executed.
Output is controlled via Output plugins. These take the global Results object and iterate over it to produce output in the desired format. The result is returned as a string.
A custom Output class must implement the generate method which generates the output.
A bare-bones output class is:
@output_registry
class Basic(Output):
def generate(self, data):
output = [x for x in data.output()]
return output
An output object can declare its own options by adding a tuple named options to the class in the form of (arg_name, dict(argparse options).
An example to provide an option to indent the text to make it more readable.
options = (
(--indent', dict(dest='indent', help='How deeply to indent')),
)
The meta source is intended to collect basic information about the run such as the host it is run on and the time it was run.
No. healthcheck compares a known state to the state of the installation. If the installation failed then you are guaranteed to get a ton of false positives and all it will tell you is that your installation failed.
The package can be tested and developed in a python virtual environment.
It requires a full freeIPA deployment so full set of system packages need to be installed and an IPA master running.
To create the virtual environment run:
% python3 -m venv --system-site-packages venv
% venv/bin/pip install -e .
To use the environment
% source venv/bin/activate
To run the healthchecks (must be done as root for proper results):
# source venv/bin/activate
# ipa-healthcheck
To run the tests execute the virtual environment:
% pip install pytest
% pytest
The configuration file and directory are not yet created so you'll need to do that manually:
# mkdir /etc/ipahealthcheck
# echo "[default]" > /etc/ipahealthcheck/ipahealthcheck.conf
Here is some basic guidance on what a non-SUCCESS message from a check means. How to fix any particular result is heavily dependent on the error(s) discovered and their context. A single failure may be detected by multiple checks.
Compares the value of the CA (and KRA if installed) certificates with the value found in CS.cfg. If they don't match then the CA will likely fail to start.
{
"source": "ipahealthcheck.dogtag.ca",
"check": "DogtagCertsConfigCheck",
"result": "ERROR",
"kw": {
"key": "ocspSigningCert cert-pki-ca",
"directive": "ca.ocsp_signing.cert",
"configfile": "/var/lib/pki/pki-tomcat/conf/ca/CS.cfg",
"msg": "Certificate 'ocspSigningCert cert-pki-ca' does not match the value of ca.ocsp_signing.cert in /var/lib/pki/pki-tomcat/conf/ca/CS.cfg"
}
}
Runs the equivalent of ipa cert-show 1 to verify basic connectivity.
{
"source": "ipahealthcheck.dogtag.ca",
"check": "DogtagCertsConnectivityCheck",
"result": "ERROR",
"kw": {
"msg": "Request for certificate failed, Certificate operation cannot be completed: Unable to communicate with CMS (503)"
}
}
Searches for entries in LDAP matching (&(!(objectclass=nstombstone))(nsds5ReplConflict=*))
{
"source": "ipahealthcheck.ds.replication",
"check": "ReplicationConflictCheck",
"result": "ERROR",
"kw": {
"key": "nsuniqueid=66446001-1dd211b2+uid=bjenkins,cn=users,cn=accounts,dc=example,dc=test",
"conflict": "namingConflict",
"msg": "Replication conflict"
}
}
Loops through all expected certmonger requests and checks expiration based on what certmonger knows about the certificate. A warning is issued if the certificate expires in cert_expiration_days (the default is 28).
Expired certificate:
{
"source": "ipahealthcheck.ipa.certs",
"check": "IPACertmongerExpirationCheck",
"result": "ERROR",
"kw": {
"key": 1234,
"expiration_date", "20160101001704Z",
"msg": "Request id 1234 expired on 20160101001704Z"
}
}
Expiring certificate:
{
"source": "ipahealthcheck.ipa.certs",
"check": "IPACertmongerExpirationCheck",
"result": "WARNING",
"kw": {
"key": 1234,
"expiration_date", "20160101001704Z",
"days": 9,
"msg": "Request id 1234 expires in 9 days"
}
}
Similar to IPACertmongerExpirationCheck except the certificate is pulled from the PEM file or NSS database and re-verified. This is in case the certmonger tracking becomes out-of-sync with the certificate on disk.
The certificate file cannot be opened:
{
"source": "ipahealthcheck.ipa.certs",
"check": "IPACertfileExpirationCheck",
"result": "ERROR",
"kw": {
"key": 1234,
"certfile": "/path/to/cert.pem",
"error": [error],
"msg": "Unable to open cert file '/path/to/cert.pem': [error]"
}
}
The NSS database cannot be opened:
{
"source": "ipahealthcheck.ipa.certs",
"check": "IPACertfileExpirationCheck",
"result": "ERROR",
"kw": {
"key": 1234,
"dbdir": "/path/to/nssdb",
"error": [error],
"msg": "Unable to open NSS database '/path/to/nssdb': [error]"
}
}
The tracked nickname cannot be found in the NSS database:
{
"source": "ipahealthcheck.ipa.certs",
"check": "IPACertfileExpirationCheck",
"result": "ERROR",
"kw": {
"key": 1234,
"dbdir": "/path/to/nssdb",
"nickname": [nickname],
"error": [error],
"msg": "Unable to retrieve cert '[nickname]' from '/path/to/nssdb': [error]"
}
}
Expired certificate:
{
"source": "ipahealthcheck.ipa.certs",
"check": "IPACertfileExpirationCheck",
"result": "ERROR",
"kw": {
"key": 1234,
"expiration_date", "20160101001704Z",
"msg": "Request id 1234 expired on 20160101001704Z"
}
}
Expiring certificate:
{
"source": "ipahealthcheck.ipa.certs",
"check": "IPACertfileExpirationCheck",
"result": "WARNING",
"kw": {
"key": 1234,
"expiration_date", "20160101001704Z",
"days": 9,
"msg": "Request id 1234 expires in 9 days"
}
}
Load the CA chain from /etc/ipa/ca.crt and test each one for expiration. This test is designed to ensure that the entire CA chain for all certificates is validated. For example, if the web or LDAP certificates have been replaced then the CA chain for those certs will reside in /etc/ipa/ca.crt. This includes an IPA CA signed by an external authority.
Expiring certificate:
{
"source": "ipahealthcheck.ipa.certs",
"check": "IPACAChainExpirationCheck",
"result": "WARNING",
"kw": {
"path": "/etc/ipa/ca.crt",
"key": "CN=Certificate Authority,O=EXAMPLE.TEST",
"days": 2,
"msg": "CA '{key}' is expiring in {days} days."
}
}
Expired certificate:
{
"source": "ipahealthcheck.ipa.certs",
"check": "IPACAChainExpirationCheck",
"result": "CRITICAL",
"kw": {
"path": "/etc/ipa/ca.crt",
"key": "CN=Certificate Authority,O=EXAMPLE.TEST",
"msg": "CA '{key}' is expired."
}
}
Compares the certmonger tracking on the system to the expected values. A query of the expected name/value pairs in certmonger is done to certmonger. On failure the contents of the query are missing. This result would be seen either if the certificate is tracked but there is some slight change in the expected value or if the tracking is missing entirely.
Missing certificate tracking:
{
"source": "ipahealthcheck.ipa.certs",
"check": "IPACertTracking",
"result": "ERROR",
"kw": {
"key": "cert-file=/var/lib/ipa/ra-agent.pem, key-file=/var/lib/ipa/ra-agent.key, ca-name=dogtag-ipa-ca-renew-agent, cert-storage=FILE, cert-presave-command=/usr/libexec/ipa/certmonger/renew_ra_cert_pre, cert-postsave-command=/usr/libexec/ipa/certmonger/renew_ra_cert"
"msg": "Missing tracking for cert-file=/var/lib/ipa/ra-agent.pem, key-file=/var/lib/ipa/ra-agent.key, ca-name=dogtag-ipa-ca-renew-agent, cert-storage=FILE, cert-presave-command=/usr/libexec/ipa/certmonger/renew_ra_cert_pre, cert-postsave-command=/usr/libexec/ipa/certmonger/renew_ra_cert"
}
}
An unknown certificate is being tracked by certmonger. This may be perfectly legitimate, it is provided for information only:
{
"source": "ipahealthcheck.ipa.certs",
"check": "IPACertTracking",
"result": "WARNING",
"kw": {
"key": 1234,
"msg": "Unknown certmonger id 1234'
}
}
The trust for certificates stored in NSS databases is compared against a known good state.
{
"source": "ipahealthcheck.ipa.certs",
"check": "IPACertNSSTrust",
"result": "ERROR",
"kw": {
"key": "auditSigningCert cert-pki-ca",
"expected": "u,u,Pu",
"got": "u,u,u",
"nickname": "auditSigningCert cert-pki-ca",
"dbdir": "/etc/pki/pki-tomcat/alias",
"msg": "Incorrect NSS trust for auditSigningCert cert-pki-ca. Got u,u,u expected u,u,Pu"
}
}
Ensure CA certificate entries in LDAP and NSS databases match.
{
"source": "ipahealthcheck.ipa.certs",
"check": "IPACertMatchCheck",
"result": "ERROR",
"kw": {
"msg": "CA Certificate from /etc/ipa/nssdb does not match /etc/ipa/ca.crt"
}
}
Check if Dogtag certificates present in both NSS DB and LDAP match.
{
"source": "ipahealthcheck.ipa.certs",
"check": "IPADogtagCertsMatchCheck",
"result": "ERROR",
"kw": {
"msg": "'subsystemCert cert-pki-ca' certificate in NSS DB does not match entry in LDAP"
}
}
Validate the certificate chain of the NSS certificates. This executes: certutil -V -u V -e -d [dbdir] -n [nickname].
{
"source": "ipahealthcheck.ipa.certs",
"check": "IPANSSChainValidation",
"result": "ERROR",
"kw": {
"key": "/etc/dirsrv/slapd-EXAMPLE-TEST:Server-Cert",
"nickname": "Server-Cert",
"dbdir": [path to NSS database],
"reason": "certutil: certificate is invalid: Peer's Certificate issuer is not recognized.\n: ",
"msg": ""Validation of Server-Cert in /etc/dirsrv/slapd-EXAMPLE-TEST/ failed: certutil: certificate is invalid: Peer's Certificate issuer is not recognized.\n "
}
}
Validate the certificate chain of the OpenSSL certificates. This executes: openssl verify -verbose -show_chain -CAfile /etc/ipa/ca.crt /path/to/cert.pem
{
"source": "ipahealthcheck.ipa.certs",
"check": "IPAOpenSSLChainValidation",
"result": "ERROR",
"kw": {
"key": "/var/lib/ipa/ra-agent.pem",
"reason": "O = EXAMPLE.TEST, CN = IPA RA\nerror 20 at 0 depth lookup: unable to get local issuer certificate\n",
"msg": "Certificate validation for /var/lib/ipa/ra-agent.pem failed: O = EXAMPLE.TEST, CN = IPA RA\nerror 20 at 0 depth lookup: unable to get local issuer certificate\n"
}
}
Verify the description and userCertificate values in uid=ipara,ou=People,o=ipaca.
{
"source": "ipahealthcheck.ipa.certs",
"check": "IPARAAgent",
"result": "ERROR",
"kw": {
"expected": "2;125;CN=Certificate Authority,O=EXAMPLE.TEST;CN=IPA RA,O=EXAMPLE.TEST",
"got": "2;7;CN=Certificate Authority,O=EXAMPLE.TEST;CN=IPA RA,O=EXAMPLE.TEST",
"msg": "RA agent description does not match. Found 2;7;CN=Certificate Authority,O=EXAMPLE.TEST;CN=IPA RA,O=EXAMPLE.TEST in LDAP and expected 2;125;CN=Certificate Authority,O=EXAMPLE.TEST;CN=IPA RA,O=EXAMPLE.TEST"
}
}
Verify the description and userCertificate values in uid=ipakra,ou=people,o=kra,o=ipaca.
{
"source": "ipahealthcheck.ipa.certs",
"check": "IPAKRAAgent",
"result": "ERROR",
"kw": {
"expected": "2;125;CN=Certificate Authority,O=EXAMPLE.TEST;CN=IPA RA,O=EXAMPLE.TEST",
"got": "2;7;CN=Certificate Authority,O=EXAMPLE.TEST;CN=IPA RA,O=EXAMPLE.TEST",
"msg": "KRA agent description does not match. Found 2;7;CN=Certificate Authority,O=EXAMPLE.TEST;CN=IPA RA,O=EXAMPLE.TEST in LDAP and expected 2;125;CN=Certificate Authority,O=EXAMPLE.TEST;CN=IPA RA,O=EXAMPLE.TEST"
}
}
Confirm that the IPA certificates are not revoked. This uses the certmonger tracking to determine the list of certificates to validate.
{
"source": "ipahealthcheck.ipa.certs",
"check": "IPACertRevocation",
"result": "ERROR",
"kw": {
"key": 1234,
"revocation_reason": "superseded",
"msg": "Certificate is revoked, superseded"
}
}
Check that the certmonger CA configuration is correct. Evaluates dogtag-ipa-ca-renew-agent and dogtag-ipa-ca-renew-agent-reuse.
{
"source": "ipahealthcheck.ipa.certs",
"check": "IPACertmongerCA",
"result": "ERROR",
"kw": {
"key": "dogtag-ipa-ca-renew-agent",
"msg": "Certmonger CA 'dogtag-ipa-ca-renew-agent' missing"
}
}
This reports the configured DNA range, if any. It is expected that this is combined elsewhere for further analysis.
{
"source": "ipahealthcheck.ipa.dna",
"check": "IPADNARangeCheck",
"result": "SUCCESS",
"kw": {
"range_start": 1000,
"range_max": 199999,
"next_start": 0,
"next_max": 0,
}
}
These checks verify the owner and mode of files installed or configured by IPA. There are many permutations of file permissions and ownership that may be valid and continue to work. This reports on the expected values in a fresh IPA installation. Deviations are reported at the WARNING level.
This covers the following checks:
Examples include:
{
"source": "ipahealthcheck.ipa.files",
"check": "IPAFileCheck",
"result": "WARNING",
"kw": {
"key": "_etc_ipa_ca.crt_mode",
"path": "/etc/ipa/ca.crt",
"type": "mode",
"expected": "0644",
"got": "0444",
"msg": "Permissions of /etc/ipa/ca.crt are 0444 and should be 0644"
}
}
{
"source": "ipahealthcheck.ipa.files",
"check": "IPAFileNSSDBCheck",
"result": "WARNING",
"kw": {
"key": "_etc_dirsrv_slapd-EXAMPLE-TEST_pkcs11.txt_mode",
"path": "/etc/dirsrv/slapd-EXAMPLE-TEST/pkcs11.txt",
"type": "mode",
"expected": "0640",
"got": "0666",
"msg": "Permissions of /etc/dirsrv/slapd-EXAMPLE-TEST/pkcs11.txt are 0666 and should be 0640"
}
},
Executes: kinit -kt /etc/krb5.keytab to verify that the host keytab is valid.
A set of information checks to report on whether the current master is the CRL generator and/or the renewal master.
{
"source": "ipahealthcheck.ipa.roles",
"check": "IPACRLManagerCheck",
"result": "SUCCESS",
"kw": {
"key": "crl_manager",
"crlgen_enabled": true
}
},
{
"source": "ipahealthcheck.ipa.roles",
"check": "IPARenewalMasterCheck",
"result": "SUCCESS",
"kw": {
"key": "renewal_master",
"master": true
}
}
Topology checks to check both for compliance with recommendations and errors.
Provide the equivalent of: ipa topologysuffix-verify
On failure this will return any errors discovered like connection errors or too many replication agreements.
On success it will return the configured domains.
{
"source": "ipahealthcheck.ipa.topology",
"check": "IPATopologyDomainCheck",
"result": "SUCCESS",
"kw": {
"suffix": "domain"
}
},
{
"source": "ipahealthcheck.ipa.topology",
"check": "IPATopologyDomainCheck",
"result": "SUCCESS",
"kw": {
"suffix": "ca"
}
}
Verify common AD Trust configuration issues. Checks will return SUCCESS if not configured as a trust agent or controller.
Check the sssd configuration when the machine is configured as a trust agent.
provider should be ipa and ipa_server_mode should be true.
{
"source": "ipahealthcheck.ipa.trust",
"check": "IPATrustAgentCheck",
"severity": ERROR,
"kw": {
"key": "ipa_server_mode_false",
"attr": "ipa_server_mode",
"sssd_config": "/etc/sssd/sssd.conf",
"domain": "ipa.example.com",
"msg": "{attr} is not True in {sssd_config} in the domain {domain}"
}
}
Ensure that the IPA domain is in the output of sssctl domain-list and the trust domains matches the sssd domains.
If the domain lists don't match:
{
"source": "ipahealthcheck.ipa.trust",
"check": "IPATrustDomainsCheck",
"result": "ERROR",
"kw": {
"key": "domain-list",
"sslctl": "/usr/sbin/sssctl",
"sssd_domains": "ad.vm",
"trust_domains": "",
"msg": "{sslctl} {key} reports mismatch: sssd domains {sssd_domains} trust domains {trust_domains}"
}
}
This resolves an AD user, Administrator@REALM. This populates the AD Global catalog and AD Domain Controller values in sssctl domain-status output.
{
"source": "ipahealthcheck.ipa.trust",
"check": "IPATrustCatalogCheck",
"result": "ERROR",
"kw": {
"key": "AD Global Catalog",
"output": "Active servers:\nAD Domain Controller: root-dc.ad.vm\nIPA: ipa.example.com",
"sssctl": "/usr/sbin/sssctl",
"domain": "ad.vm",
"msg": "{key} not found in {sssctl} 'domain-status' output: {output}"
}
}
Verifies that the sidgen plugin is enabled in the IPA 389-ds instance.
{
"source": "ipahealthcheck.ipa.trust",
"check": "IPAsidgenpluginCheck",
"result": "ERROR",
"kw": {
"key": "IPA SIDGEN",
"error": "no such entry",
"msg": "Error retrieving 389-ds plugin {key}: {error}"
}
}
Verify that the current host is a member of cn=adtrust agents,cn=sysaccounts,cn=etc,SUFFIX.
{ "source": "ipahealthcheck.ipa.trust", "check": "IPATrustAgentMemberCheck", "result": "ERROR", "kw": { "key": "ipa.example.com", "group": "adtrust agents", "msg": "{key} is not a member of {group}" } }
Verify that the current host cifs principal is a member of cn=adtrust agents,cn=sysaccounts,cn=etc,SUFFIX.
{
"source": "ipahealthcheck.ipa.trust",
"check": "IPATrustControllerPrincipalCheck",
"result": "ERROR",
"kw": {
"key": "cifs/ipa.example.com@EXAMPLE.COM",
"group": "adtrust agents",
"msg": "{key} is not a member of {group}"
}
}
Verify that the current host starts the ADTRUST service in ipactl.
{
"source": "ipahealthcheck.ipa.trust",
"check": "IPATrustControllerServiceCheck",
"result": "ERROR",
"kw": {
"key": "ADTRUST",
"msg": "{key} service is not enabled"
}
}
Verify that ldapi is enabled for the passdb backend in the output of net conf list:
{
"source": "ipahealthcheck.ipa.trust",
"check": "IPATrustControllerConfCheck",
"result": "ERROR",
"kw": {
"key": "net conf list",
"got": "",
"expected": "ipasam:ldapi://%2fvar%2frun%2fslapd-EXAMPLE-COM.socket",
"option": "passdb backend",
"msg": "{key} option {option} value {got} doesn't match expected value {expected}"
}
}
Verify that the admins group's SID ends with 512 (Domain Admins RID).
{
"source": "ipahealthcheck.ipa.trust",
"check": "IPATrustControllerGroupSIDCheck",
"result": "ERROR",
"kw": {
"key": "ipantsecurityidentifier",
"rid": "S-1-5-21-1078564529-1875285547-1976041503-513",
"msg": "{key} is not a Domain Admins RID"
}
}
If not a trust controller and AD trust is enabled verify that the trust-ad pkg is installed.
{
"source": "ipahealthcheck.ipa.trust",
"check": "IPATrustPackageCheck",
"result": "WARNING",
"kw": {
"key": "adtrustpackage",
"msg": "trust-ad sub-package is not installed. Administration will be limited."
}
}
Return the status of required IPA services
The following services are monitored:
The value of check is the name of the IPA service. Note that dashes are replaced with underscores in the service names.
An example of a stopped service:
{
"source": "ipahealthcheck.meta.services",
"check": "httpd",
"result": "ERROR",
"kw": {
"status": false,
"msg": "httpd: not running"
}
}
Provide basic information about the IPA master itself.
Output includes the FQDN and the version of IPA.
{
"source": "ipahealthcheck.meta.core",
"check": "MetaCheck",
"result": "SUCCESS",
"kw": {
"fqdn": "ipa.example.test",
"ipa_version": "4.8.0",
"ipa_api_version": "2.233"
}
}
Check on available disk space. Running low can cause issues with logging, execution and backups.
Both a percentage and raw minimum values are tested.
It is possible there is some overlap depending on mount points.
The minimum free is 20 percent and is currently hard coded.
The following paths are checked:
Path free MB /var/lib/dirsrv/ 1024 /var/lib/ipa/backup/ 512 /var/log/ 1024 /var/log/audit/ 512 /var/tmp/ 512 /tmp 512
For example a full /tmp would be reported as:
{
"source": "ipahealthcheck.system.filesystemspace",
"check": "FileSystemSpaceCheck",
"result": "ERROR",
"kw": {
"msg": "/tmp: free space percentage under threshold: 0% < 20%",
"store": "/tmp",
"percent_free": 0,
"threshold": 20
}
},
{
"source": "ipahealthcheck.system.filesystemspace",
"check": "FileSystemSpaceCheck",
"result": "ERROR",
"kw": {
"msg": "/tmp: free space under threshold: 0 MiB < 512 MiB",
"store": "/tmp",
"free_space": 0,
"threshold": 512
}
}