Introduction

HTCflasher is a free (GPL'd) tool to work with HTC based bootloaders (SPLs).

Currently most new HTC devices are supported, and the basic set of functions to work with every HTC bootloader has been implemented, so adding support for new bootloader versions or new devices should be quite easy to do, if not working out of the box.

Use it with CARE. If you don't know what you're doing you can brick your device. Keep in mind that future / untested bootloaders can break backward compatibility. USE IT AT YOUR OWN RISK.

Supported devices

HTCflasher has been tested on the following devices:

• HTC Hermes: works on SPL versions >= 2.x

• HTC Trinity: works on all SPL versions

• HTC Kaiser: works on all SPL versions

• HTC Shangrila (Shift): works on all SPL versions

• HTC Polaris: works on all SPL versions

• HTC Elf: works on all SPL versions

• HTC Artemis: works on all SPL versions

• HTC Nike: works on all SPL versions

  Not tested, but know to work on:

• HTC Cheetah (Treo 750)

• HTC Herald

• HTC Athena

• HTC Vogue

• HTC Titan

• HTC Gene

• HTC Pharaos

• HTC Juno

• HTC Sedna

  Also should work on Smartphone platform:

• Excalibur, Monet, Oxygen, Vox, Wings, Cavalier, etc...

  Can it be used in other new devices?

  Probably yes, all new devices using NBH format for rom upgrades should be supported out of the box, at least until HTC changes the SPL commands :)

  Can it be used in other old devices?

  Probably not, HTC Flasher v3 only supports devices using NBH ROM format, if your device uses older NBF files it is currently not supported.

  Your feedback/patches are more than welcome :)

  Supported Operating Systems

  GNU/Linux x86 and x86_64 - fully supported Intel Mac OS X - partially supported win32 - partially supported

  HTCflasher features

  • Flash NBH files: replaces the Windows Rom Upgrade Utility (RUU)
  • Serial prompt: replaces mtty / minicom

  YANG features

  • Generate NBH files: replaces windows tools like htcrt
  • Extract NBH files: replaces windows tools like nbhextract

  INSTALLATION

  To compile from sources run 'make'. To install run 'make install' as root. To uninstall run 'make remove' as root.

  For Linux ROM Kitchen, see the file RomKitchen/README.lrk