【WGCF】连接CF WARP为服务器添加IPv4/IPv6网络
目录
更新信息
2024.6.28 menu.sh v3.0.8 The official WARP Linux Client supports arm64 systems and is available in both socks5 proxy and Warp interface modes; 官方 WARP Linux Client 支持 arm64 系统, Socks5 proxy 模式 和 Warp interface 模式均可用
2024.6.2 menu.sh v3.0.7 Support CentOS 9 / Alma Linux 9 / Rocky Linux 9 system; 支持 CentOS 9 / Alma Linux 9 / Rocky Linux 9 系统
2024.5.5 menu.sh v3.0.6 / warp-go.sh v1.1.8 Support Alpine edge system; 支持 Alpine edge 系统
2024.5.1 menu.sh v3.0.5 Deal with apt library changes for Debian 10 installations of wireguard-tools; 处理 Debian 10 安装 wireguard-tools 的 apt 库变更的问题
历史更新 history(点击即可展开或收起)
>2024.4.14 menu.sh v3.0.4 1. Alpine check and update the wget version; 2. Add a message for feedback when connect warp fails; 1. Alpine 检测并更新 wget 版本的; 2. 获取 IP 失败时增加提示信息以便反馈
>
>2024.3.21 menu.sh v3.0.3 / warp-go.sh 1.1.7 1. Update some commands according to warp-cli; 2. Remove the github cdn; 1. 根据 warp-cli 官方更新部分命令; 2. 去掉 Github cdn
>
>2024.2.7 menu.sh v3.0.2 To check if the WireGuard kernel module is already loaded. If not, attempt to load it and recheck; 判断系统是否已经加载 wireguard 内核模块,如果还没有则尝试加载,再重新判断
>
>2023.12.19 menu.sh v3.0.1 / warp-go.sh 1.1.6 Add a check to see if udp is allowed, if all endpoints of WARP are unreachable, the script will abort; 增加是否允许 udp 的检测,如果 WARP 的所有 endpoint 均不能连通,脚本将中止
>
>2023.8.22 menu.sh v3.0.0 / warp-go.sh 1.1.5 Add Github CDN; 添加 Github CDN
>
>2023.8.15 menu.sh v3.0.0 1. Add a non-global working mode, it can be switched use [warp g], which requires a script reinstallation; 2. Support regions sanctioned by Cloudflare, such as Russia, with a shared account; 3. IPv6 only uses the preset nat64 and restores the original nameserver file when uninstalled; 1. 增加warp的非全局工作模式,可以通过 [warp g] 切换,需要重装脚本; 2. 支持被Cloudflare制裁地区,如俄罗斯,使用共享账户; 3. IPv6 only 使用预设 nat64,卸载时恢复原始 nameserver 文件
>
>2023.7.21 menu.sh v3.0.0 beta2 1. If the system supports wireguard kernel and wireguard-go-reserved, it can be switched use [warp k], which requires a script reinstallation; 2. Support Fedora system; 3. Fix switch error caused by client version 2023.7.40-1; 1. 如果系统支持 wireguard kernel 和 wireguard-go-reserved,可以通过 [warp k] 切换,需要重装脚本; 2. 支持 Fedora 系统; 3. 修复 client 2023.7.40-1 版本导致的开关错误
>
>2023.6.30 menu.sh v3.0.0 beta IMPORTANT: 1. Use Cloudflare official warp api to replace wgcf; 2. Use wireguard-go with reserved to replace kernel. Make Hong Kong, Los Angeles and other restricted areas use warp; The above are the works of enthusiastic user, I would like to thank this guy and warp-go author coia for their contributions on behalf of all users of this script; 3. Since the changes are too big, please ask users to reinstall, if you have any problems, please feedback, I will deal with it as soon as possible; 重要更新: 1. 全面用 Cloudflare 官方 warp api 替代 wgcf; 2. 使用 wireguard-go with reserved 替代内核。使香港,洛杉矶等受限地区使用 warp; 以上均是热心网友的作品,我谨代表本脚本的所有用户感谢这位网友和 warp-go 作者 coia 的贡献; 3.由于改动太大,请用户重新安装,如有问题请反馈,我将会尽快处理
>
>2023.6.27 menu.sh V2.53 Wireproxy proxy mode supports warp dualstack. From now on wgcf / wireproxy / client all support dual stack; Client Proxy 模式支持 warp 双栈, 从此之后 wgcf / wireproxy / client 通通支持双栈
>
>2023.6.21 menu.sh V2.52 1. Client proxy mode supports warp dualstack; 2. Client warp mode supports warp dualstack; 3. Speed up script startup; Thanks to Bro ⑥, WordsWorthLess, us254 and chika0801 for the guidace on the xray template; 1. Client Proxy 模式支持 warp 双栈; 2. Client warp 模式支持 warp 双栈; 3. 加快脚本启动速度; 感谢网友 ⑥哥, WordsWorthLess, us254 and chika0801 关于 xray 模板的指导
>
>2023.6.18 menu.sh V2.51 Client supports Debian 12 (bookworm); Client 支持 Debian 12 (bookworm)
>
>2023.5.20 menu.sh V2.50 1. Client supports IPv6 only VPS; 2. Support 4 ways to upgrade to teams account including token (Easily available at https://web--public--warp-team-api--coia-mfs4.code.run); 3. Use api to delete warp account while uninstalling; 1. Client 支持 IPv6 only VPS 安装; 2. 支持包括 token 等4种方式升级为 teams 账户 (可通过 https://web--public--warp-team-api--coia-mfs4.code.run 轻松获取); 3. 卸载的同时使用 api 删除 warp 账户
>
>2023.5.15 Cloudflare api
>Thanks to badafans open source project and patient guidance. Now released in linux using the Cloudflare WARP api. [badafans open source project](https://github.com/badafans/warp-reg)
>Use method
>感谢大神 badafans的开源项目及耐心指导,现发布在linux下使用的Cloudflare WARP api,[badafans的开源项目](https://github.com/badafans/warp-reg)
>使用方法
>```
>wget -N https://gitlab.com/fscarmen/warp/-/raw/main/api.sh && bash api.sh [option]
>```
>
>2023.5.10 warp-go V1.1.4 1. Docking the warp-go official account pool api, wiki: https://docs.zeroteam.top/apis/warp; 2. Change non-global from ipv4 only to dualstacks; 3. Fix the bug that the native IPv6 cannot login when using dualstacks; 4. Update the Best-enpoint app; 5. Change ip api; 1. 对接 warp-go 官方账户池 api,wiki: https://docs.zeroteam.top/apis/warp; 2. 非全局从ipv4 only 改为双栈; 3. 修复双栈时使用原生 IPv6 不能登陆的 bug; 4. 更新最佳 Endpoint 应用; 5. 更换 ip api
>
>2023.3.26 warp-go V1.1.3 / menu.sh 2.49 1. Change the best Warp endpoint to standard ports [500,1701,2408,4500]; 2. Upgrade the Netflix unlocking section; 1. warp endpoint 优选改为标准端口 [500,1701,2408,4500]; 2. 升级奈飞解锁部分
>
>2023.3.14 warp-go V1.1.2 / menu.sh 2.48 To speed up WARP, automatically find the most suitable endpoint for local use and apply it to wgcf, warp-go and client. Thanks to an anonymous and enthusiastic user for the tool; 为了提速 WARP,自动寻找最适合本机使用的 endpoint,应用在 wgcf, warp-go 和 client,感谢匿名的热心网友提供的工具
>
>2023.3.2 warp-go V1.1.1 1. warp-go v1.0.8 is supported. Allowing custom MTU values in the configuration file /opt/warp-go/warp.conf; 2. Singbox configuration exports reseved using 3-numeric-array instead of a string; 1. 支持 warp-go v1.0.8 , 允许在配置文件 /opt/warp-go/warp.conf 自定义 MTU 值; 2. Singbox配置导出 reseved 使用三个数字的数组代替字符串
>
>2023.2.22 [Unlock chatGPT without installing warp; 不安装 warp 就能解锁 chatGPT 的方法](README.md#通过-warp-解锁-chatgpt-的方法)
>
>2023.2.7 menu.sh V2.47 Iptables + dnsmasq + ipset solution supports chatGPT. Install via the 12 option in the menu or `bash menu.sh e`; Iptables + dnsmasq + ipset 方案支持 chatGPT. 安装方式: 菜单 12 选项或者 `bash menu.sh e`
>
>2022.12.17 warp-go V1.1.0 Support OpenWrt system; 支持 OpenWrt 系统
>
>2022.12.10 warp-go V1.0.9 1.Export wireguard and sing-box config file with [warp-go e]; 2.Teams token website change to https://web--public--warp-team-api--coia-mfs4.code.run 1. 使用 [warp-go e] 导出 wireguard 和 sing-box 配置文件; 2.获取 teams token 网站更换为: https://web--public--warp-team-api--coia-mfs4.code.run
>
>2022.10.19 menu V2.46 / warp-go V1.0.8 Switch the IPv4 / IPv6 priority by [warp s 4/6/d] or [warp-go s 4/6/d]; 通过 [warp s 4/6/d] 或者 [warp-go 4/6/d]来切换 IPv4 / IPv6 的优先级别
>
>2022.10.7 warp-go V1.0.7 1. Further improve the conversion function between accounts. You can even switch from one WARP+ to another; 2. Formatting code; 1. 进一步完善账户间转换功能,你甚至可以从一个 WARP+ 换到另一个; 2. 优化代码
>
>2022.10.6 menu V2.45 1. Further improve the conversion function between accounts. You can even switch from one WARP+ to another; 2. Rebuild the account registration module; 1. 进一步完善账户间转换功能,你甚至可以从一个 WARP+ 换到另一个; 2. 重构账户注册模块
>
>2022.9.10 Over 2,000 users star. Thank you to every solution creator. I'm just passing these on more widely to serve more players. Thank you to each user for your continued support. I wish you all good health and Happy Mid-Autumn Festival!
>项目 star 达 2000。感谢每位解决方案创造者。我只是把这些作更广泛的传递,服务更多玩家。感谢各用户一如既往的支持。祝大家身体健康,中秋节快乐!
>
>2022.8.29 warp-go V1.0.6 1.Fixed the bug that routing rules failed after restart in non-global mode; 2.Fixed the bug of not changing IP; 1.解决了非全局模式重启后,路由规则失效的bug; 2.解决了更换不了IP的bug
>
>2022.8.27 menu V2.44 Refactoring the uninstallation logic. Dependency uninstallation requires confirmation; 重构卸载逻辑,依赖卸载需要确认
>
>2022.8.23 menu V2.43 warp-go V1.0.5 Support NAT VPS. Such as Woiden; 支持 NAT 服务器,例如 Woiden.
>
>~2022.8.21 After testing, wgcf warp service is back to normal in Hong Kong and Toronto, etc. 经测试,香港和多伦多等地区 wgcf warp 服务恢复正常~
>
>2022.8.21 menu V2.42 1.Add shortcut hints in the menu; 2.Remove the shortcut of S. Single and dual stacks swithing can directly use [warp 4/6/d]; 1.在菜单中增加快捷方式的提示; 2.移除快捷方式 s,单双栈相互切换可以直接 [warp 4/6/d]
>
>2022.8.20 warp-go V1.0.4 Chinese and English language support. Hello World; 中英双语支持,与世界接轨
>
>2022.8.20 warp-go V1.0.3 New feat: Menu + shortcuts for various usage scenarios; 菜单 + 快捷方式,适合各种使用场景
>
>2022.8.17 warp-go v1.0.2 1. Add WARP IPv4 non-global and global switch echo other. To use the v2ray/xray configuration file for triage, refer to the template for Client WARP mode on the project homepage; 2. Output wgcf configuration file (warp-go e); 1.在原来全局的基础上,新增 WARP IPv4 非全局方案,配合 v2ray/xray 配置文件来分流,参考项目主页的 Client WARP 模式的模版; 2.输出 wgcf 配置文件(warp-go e)
>
>2022.8.13 warp-go v1.0.1 1.New feat: Support WARP+ (warp-go a ); 2.Support Teams (warp-go a token). You can easily get the token through https://warp-team-api.herokuapp.com/ ; 3.Brush unlock Netflix IP (warp-go i); 4.Support AMD v2 v3 v4 instruction set; 1.新增 WARP+ 升级功能(warp-go a ); 2.新增 Teams 升级功能(warp-go a token),通过 https://warp-team-api.herokuapp.com/ 你能轻松获取 token; 3.新增刷解锁奈飞IP功能(warp-go i); 4.支持 GOAMD64v4 等指令集,提升功能
>
>2022.8.13 First on the whole web, proudly presents @CoiaPrant's warp-go one-click script. Using various interfaces of CloudFlare-WARP and integrating wireguard-go, it can completely replace WGCF. Save Hong Kong, Toronto, etc., and let VPS without official WARP also get WARP IP. Thanks @CoiaPrant and his team again. Project official address: https://gitlab.com/ProjectWARP/warp-go/-/tree/master/
>
>全网首发,隆重推出 @CoiaPrant 的 warp-go 一键脚本。使用 CloudFlare-WARP 的各类接口,集成 wireguard-go,可以完全替代 WGCF。 救活了香港、多伦多等,让没有官方 WARP 的 VPS 也可以获取 WARP IP。再次感谢 @CoiaPrant 及其团队。项目地址: https://gitlab.com/ProjectWARP/warp-go/-/tree/master/
>
>```
>wget -N https://gitlab.com/fscarmen/warp/-/raw/main/warp-go.sh && bash warp-go.sh [option] [lisence]
>```
>
>2022.8.5 2.41 1.Get the traffic quota of WARP+ via API. Thanks to Oreo for technical support; 1.通过 API 获取 WARP+ 剩余流量, 感谢猫佬的技术支持。
>
>2022.6.27 香港 IPv6 only 安装 Client 的方式,转自 LOC jhsyue 的技术贴:[wiki-hk-61.8 开启warp教程](https://hostloc.com/thread-1036792-1-1.html)
>
>2022.6.11 2.40 1.Support VPS-free LXC VPS; 1.支持 VPS-free LXC VPS
>
>2022.5.25 2.39 1.Automatically sync the latest official versions of wgcf, CloudFlare client, wireguard-go and wireproxy every day, allowing users to have >the best performance with every installation; 2.Change the installation method of CloudFlare client, from APT/YUM repository to Package repository >repository; 1.每天自动同步官方版本最新版本的 wgcf、 CloudFlare client、wireguard-go 和 wireproxy,让用户每次安装都能获得最佳性能; 2.更换 CloudFlare client 的安装方式,从 >APT/YUM库 改到 Package 库
>
>2022.5.18 2.38 1. Fully support Ubuntu 22.04 and CentOS Streams 9 LTS; 2. Optimize Debian to speed up installation; 1. 全面支持 Ubuntu 22.04 和 CentOS >Streams 9 LTS; 2. 优化 Debian 以提升安装速度
>
>2022.4.21 WARP one-click script on macOS. A VPN that fast,modern,secure by WireGuard tunnel and WARP service 全网首发: macOS 一键脚本, 一个为免费、快速、安全的>基于 WireGuard 隧道,WARP 服务的 VPN。你可以理解为白嫖 CloudFlare 的科学服务了,也不需要服务器。
>
>项目地址: https://github.com/fscarmen/warp/tree/main/pc
>
>2022.4.8 2.37 1. First publication on a global scale: After WirePorxy, another major technological breakthrough -- WARP-Cli's WARP mode solution. Thanks >to the original creator -- Teacher LUBAN. It solves two major pain points: 1) The instability of the traditional proxy model; 2) Currently HK does not >have a WARP service; 1. 全网首发: 继 WirePorxy 之后,又一重大技术突破,WARP-Cli 的 WARP 模式方案,感谢原创者 LUBAN 老师,引用大神的思路,解决两大通点: 1) 传统 proxy 模式的>断流和慢; 2) 解决 HK 没有 WARP 服务
>
>2022.3.27 2.36 1. First publication on a global scale. By WireProxy, Wireguard client that exposes itself as a socks5 proxy; Ths Fangliding for the >information:[#113](https://github.com/fscarmen/warp/issues/113); 2. WARP+ and Teams can be used in WireProxy; 3. Systemd and change Netflix IP for >WireProxy. 1. 全网首发: 通过 wireproxy,让 WARP 在本地建议一个 socks5 代理。感谢风扇滑翔翼 提供的资讯:[#113](https://github.com/fscarmen/warp/issues/113); 2. WARP+ >和 Teams 账户可用于 WireProxy 安装或者升级; 3. WireProxy systemd 进程守护,同时支持更换 Netflix IP
>
>2022.3.23 2.35 1.Support WARP on Debian9; 1.支持 Debian 9 上安装 WARP
>
>Over 1,000 users star. Thank you for your support. 项目 star 破千,感谢各用户的大力支持。
>
>2022.3.19 2.34: 1.Support Arch Linux. Ths @SE_dong; 1.应呜呜冬 @SE_dong 的要求,新增 Arch Linux 的支持.
>
>2022.3.11 2.33: 1.First publication on a global scale. WARP Client support Ubuntu 18.04 and CentOS 7; 2. Open TUN for OVZ. You needn't setting it in the >control panel. Thx @Q_lilll; 1. 全网首发, WARP Client 支持 Ubuntu 18.04 and CentOS 7; 2. 感谢 @Q_lilll 提供方案,为 OVZ VPS 在线打开 TUN,不需要到面板处理
>
>2022.2.25 2.32: 1.Change the WARP endpoint; 2. Sync the Netflix title with lmc999; 1.更换 WARP 的 endpoint; 2. 同步 lmc999 的 Netflix 检测 title
>
>2022.2.15 Happy Lantern Festival. Bring you a new experience of docker unlock, another way to unlock Netflix. Project based on alpine, content wgcf and >unblocking Netflix scripts. Change unlock warp ip automatically. 元宵节快乐。为大家带来个 docker 解锁的全新体验,换个姿势解锁 Netflix。项目以 alpine 为基础系统,内含 >wgcf 和解锁 Netflix 脚本,自动切换解锁 WARP IP
>https://github.com/fscarmen/unlock_warp
>
>2022.2.11 2.31: 1.iptables + dnsmasq + ipset to unlock stream media. (Not available for IPv6 only VPS). It is better than setting the outbound in >xray/v2ray. 1.iptables + dnsmasq + ipset 最小化解锁流媒体,warp 只接管流媒体流量 (不适合 IPv6 only VPS),比在 xray/v2ray 设置分流的方案要更好
>
>2022.1.25 Media unlock daemon. Check it every 5 minutes. If unlocked, the scheduled task exits immediately. If it is not unlocked, it will be swiped >successfully in the background. Advantages: Minimized use of system resources. Please support professional unlock one-click script: >https://github.com/fscarmen/unlock_warp
>
>流媒体解锁守护进程,定时5分钟检查一次,遇到不解锁时更换 WARP IP,直至刷成功。请大家支持一下兄弟项目: https://github.com/fscarmen/unlock_warp
>```
>bash <(curl -sSL https://raw.githubusercontent.com/fscarmen/unlock_warp/main/unlock.sh)
>```
>
>2022.1.21 2.30: 1.All support WARP single-stack and dual-stack solutions. Switch to each other easily and quickly. Such as [warp s 4],[warp s 6],[warp s >d]; 2.Brush Netflix Unlock IP with the expect area. Such as [warp i hk]. You can use it with crontab,screen,nohup & etc. [Detail](README.md#刷-Netflix-解>锁-WARP-IP-的方法); 3.Fixed stuck when brushing Netflix IP 1.全面支持WARP单栈与双栈方案,简单并快速切换,如[warp s 4],[warp s 6],[warp s d]; 2.在刷解锁 Netflix WARP >IP 时可以带上期望的地区,如 [warp i hk]。你可以结合 crontab,screen,nohup & 等方式使用,[详细方法](README.md#刷-Netflix-解锁-WARP-IP-的方法); 3.修正刷 Netflix IP 时可能发>生的卡死不动的bug
>
> ~To be updated: huanx and malikshi [#63](https://github.com/fscarmen/warp/issues/63) needs, hope like [P3terx]>(https://github.com/P3TERX/warp.sh/blob/main/warp.sh) scripts, all support WARP single-stack and dual-stack solutions. Plan to rebuild menu modules and >pass parameters with arrays.(DONE)~
>
>~待更新:唤醒大神和 malikshi [#63](https://github.com/fscarmen/warp/issues/63) 的需求,希望像 [P3terx](https://github.com/P3TERX/warp.sh/blob/main/warp.sh) 脚本>一样,全面支持 WARP 单栈和双栈方案。计划花点时间用数组重构菜单模块和传参。(已完成)~
>
>2022.1.11 2.26: 1.Asking the unlock Netflix region where you expect before brushing WARP IP; 2.Single and Dual stack switch to each other quickly. 1.在刷>解锁 Netflix WARP IP 之前,让用户输入想要的区域的简写; 2.单栈与双栈快速切换;
>
>WARP docker solution support ARM64,AMD64 and s390x; WARP docker 方案支持 ARM64,AMD64 和 s390x CPU 架构
>Dualstack on IPv4 only ,IPv6 only and native dualstack VPS is coming; 双栈 WARP docker 已经有方案,即将推出。(现 IPv6 only 和原生双栈的都能 WARP 双栈,差 IPv4 Only >了)
>
>
>2022.1.6 重大技术突破,绝对原创,绝对原创,绝对原创。成功把 WGCF 配置文件与环境依赖分离。本着万物皆可 Docker 的思路,以超轻量级的 Alpine 为底包(底包5M+依赖22M=27MB),配置放在>映射目录处,解决某些旧系统不能使用 WARP 服务的问题。~docker 安装依赖方案只能是单栈,并不能双栈。该技术已经是 WGCF 和 wireguard 的天花板,不服来辩。~
>
>
>```
>wget -N https://cdn.jsdelivr.net/gh/fscarmen/warp/docker.sh && bash docker.sh [option] [lisence] ## 安装 docker、拉镜像和安装容器
>
>docker exec -it wgcf sh #部分系统在容器外 docker exec -it wgcf wg-quick up wgcf 不行,一定要分开执行的。进入容器
>
>wg-quick up wgcf; exit #运行 WGCF 并退出容器。
>
>```
>
>![image](https://user-images.githubusercontent.com/62703343/148343358-67d0089a-591e-4af2-915c-e725422a5b0e.png)
>
>
>2022.1.1 1.Happy new year bros. I wish everyone good health and lots of money. Thanks for your support to this project. This project belongs to bros, I >just summarized your fragmented information; 2.Add timestamp and running time while brushing Netflix IP. 1.元旦快乐,祝各位身体健康,赚钱多多。本项目是属于网友们的,我只是把大家碎片化的信息汇总而已; 2.新年第一更刷奈飞IP时加入时间戳和运行时长
>
>2021.12 29 大家可以试试另两位 WARP 作者脚本:
>1.甬哥 ```wget -N https://cdn.jsdelivr.net/gh/kkkyg/CFwarp/CFwarp.sh && bash CFwarp.sh```
>2.P3terx ```bash <(curl -fsSL git.io/warp.sh) menu```
>
>2021.12.28 2.25: IMPORTANT: 1.First publication on a global scale. Support architecture s390x for IBM Linux One(Choose WARP ipv6 single stack),thx Brother Big B and Misaka; 2.Support Alpine Linux, thx Dong gua; 3.add whitelist. support Debian bookworm; 重要更新: 1. 全网首发,支持 IBM Linux One 的 s390x 架构 CPU (请选用 WARP ipv6单栈),感谢Misaka和大B哥借机器测试 2.支持 Alpine Linux 系统,感谢 Dong gua 借机器测试 3.支持 Debian bookworm系统,增加白名单,遇到没有大版本号的系统可以往里面放
>
>2021.12.24 2.24: 1.The default language will set to the one selected during installation. ```echo 'E' >/etc/wireguard/language; warp v```; 2.Support HAX LXC VPS. It needs run ```until curl -s4m8 ip.gs; do warp n; done``` to brush the warp network; 1.默认语言设置为安装时候选择的,```中文 echo 'C' >/etc/wireguard/language; warp v```; 2.支持 HAX LXC VPSlxc 机器母鸡资源不够,warp 需要不停的刷才能获取到 ```until curl -s4m8 ip.gs; do warp n; done```
>
>2021.12.17 2.23: Support change the Netflix IP not only WGCF but also Socks5 Client. Both will keep the Plus status. Recommand runs under [screen]; 2.Support update to TEAM account online. [URL for you](https://gist.githubusercontent.com/fscarmen/56aaf02d743551737c9973b8be7a3496/raw/16cf34edf5fb28be00f53bb1c510e95a35491032/com.cloudflare.onedotonedotonedotone_preferences.xml) 1.支持 WARP Interface 和 Socks5 Client 自动更换支持奈飞的IP,两者都会保留 Plus 的状态,建议在 screen 下在后台运行,如果是中文,需要 screen -U 解决乱码问题; 2.支持在线升级为 TEAM 账户。 [这此获取 URL](https://gist.githubusercontent.com/fscarmen/56aaf02d743551737c9973b8be7a3496/raw/16cf34edf5fb28be00f53bb1c510e95a35491032/com.cloudflare.onedotonedotonedotone_preferences.xml)
>
>2021.12.14 2.22: 1.First in the whole network. Use WARP Team account instead of Plus. No need to brush Plus traffic any more. 50 user limited. return to version 2.21; 1.全网首创,使用脚本提供 TEAM 账户替代 Plus,免刷流量。~翻车了,官方说了免费team有50个账户的限制,我心存侥幸,想着1个账户多人用,现在看来是行不通了,暂先回退到2.21版本~
>
>2021.12.11 2.21: 1.BoringTUN removed because of unstable; 2.Change the DNS to Google first. 3.Count the number of runs1.BoringTUN 因不稳定而移除 2.域名解析服务器首先谷歌 3.统计运行次数
>
>2021.12.04 2.20: IMPORTANT: First publication on a global scale. Reduce installation time by more than 50% through multi-threading. No need to wait for WGCF registering and MTU value searching time; 2.Recode EN/CH traslation through associative array. Smarter and more efficient. Thx Oreo. 重大更新:1.全网首创,通过多线程,安装 WARP 时间缩短一半以上,不用长时间等待 WGCF 注册和寻找 MTU 值时间了; 2.中英双语部分关联数组重构了,更聪明高效,感谢猫大
>
>2021.11.30 2.11: 感谢luoxue-bot原创,唤醒大神告知。 1.Changing Netflix IP is adapted from other authors [luoxue-bot]; 1.更换支持 Netflix IP 改编自 [luoxue-bot] 的成熟作品
>
>2021.11.11 2.10: 1.Customize the priority of IPv4 / IPv6; 2.Customize the port of Client Socks5(default is 40000); 1.自定义 IPv4 / IPv6 优先组别; 2.自定义 Client Socks5 代理端>>口,默认40000
>
>2021.11.06 2.09: 1.WARP Linux Client supported.Socks5 proxy listening on: 127.0.0.1:40000. Register and connnect need non-WARP IPv4 interface. Native IPv4 + WARP IPv6 is ok; >2.WARP+ license on Client supported; 3.Customize the WARP+ device name. 1.支持 WARP Linux Client,Socks5 代理监听:127.0.0.1:40000,注册和连接需要非 WARP 的原生 IPv4,可以是:原生>IPv4+ WARP IPv6; 2.Client 支持 WARP+ 账户升级和安装; 3.自定义 WARP+ 设备名
>
>2021.11.01 2.08: 1.Serching the best MTU value for WARP interface automatically; 2.asn organisation for the VPS; 1.自动设置最优 MTU; 2.显示asn组织(线路提供商)
>
>2021.10.29 2.07: 1.Support Chinese and English; 2.Optimize running speed; 3.fix startup at reboot bug; 1.支持中英文,用户可自行选择; 2.大幅优化速度; 3.修复重启后启动WARP的bug
>
>2021.10.23 2.06: 1.添加自动检查是否开启 Tun 模块; 2.提高脚本适配性; 3.新增 hax、Amazon Linux 2 和 Oracle Linux 支持
>
>2021.10.15 2.05: 1.WGCF自动同步最新的2.2.9; 2.升级了重启后运行 Warp 的处理方法,不再依赖另外的文件; 3.修复 KVM 由免费账户升级为 Warp+ 账户的bug
>
>2021.10.14 2.04: 1.LXC 用户自主选择 BoringTun 还是 Wireguard-go (BoringTun用Rust语言,性能接近内核模块性能 ,稳定性与VPS有关;WireGuard-GO用Go语言,性能比前者差点,稳定性高); 2.增加限>制:原生双栈VPS只能用Warp双栈,bash menu.sh 1 会建议改为Warp双栈或退出; 3.Warp断网后,运行warp会自动关闭通道和杀掉进程; 4.脚本中止后,用 echo $? 显示 1,即代表不成功 (原来为代表运行成功的0)
>
>2021.10.12 2.03: 1.对刷网络作了优化,加快了两次尝试之间的间隔时间,不会出现死循环,因为已经限制次数为10次,有明确的提示 2.用Rust语言的 BoringTun 替代Go语言的 WireGuard-GO
>
>2021.10.10 2.02: 上游 ip.gs 用 wget 不稳定导致获取不了 IP 而一直在死刷,弃坑用 curl 替换,脚本检查到没有的话自动安装
脚本特点
- 支持 WARP+ 账户,附带第三方刷 WARP+ 流量和升级内核 BBR 脚本
- 普通用户友好的菜单,进阶者通过后缀选项快速搭建
- 智能判断vps操作系统:Ubuntu 16.04、18.04、20.04; Debian 9、10、11,CentOS 7、8; Alpine 和 Arch Linux,请务必选择 LTS 系统
智能判断硬件结构类型:AMD、ARM 和 s390x
- 结合 Linux 版本和虚拟化方式,自动优选三个 WireGuard 方案。
网络性能方面:内核集成 WireGuard>安装内核模块>BoringTun>wireguard-go
- 智能判断 WGCF 作者 github库的最新版本 (Latest release)
- 智能分析内网和公网IP生成 WGCF 配置文件
- 输出结果,提示是否使用 WARP IP ,IP 归属地
WARP好处
- 支持 chatGPT,解锁奈飞流媒体
- 避免 Google 验证码或是使用 Google 学术搜索
- 可调用 IPv4 接口,使青龙和V2P等项目能正常运行
- 由于可以双向转输数据,能做对方VPS的跳板和探针,替代 HE tunnelbroker
- 能让 IPv6 only VPS 上做的节点支持 Telegram
- IPv6 建的节点能在只支持 IPv4 的 PassWall、ShadowSocksR Plus+ 上使用
warp 运行脚本
首次运行
wget -N https://gitlab.com/fscarmen/warp/-/raw/main/menu.sh && bash menu.sh [option] [lisence/url/token]
再次运行
warp [option] [lisence]
[option] 变量1 变量2 |
具体动作说明 |
h |
帮助 |
4 |
原无论任何状态 -> WARP IPv4 |
4 lisence name |
把 WARP+ Lisence 和设备名添加进去,如 bash menu.sh 4 N5670ljg-sS9jD334-6o6g4M9F Goodluck |
6 |
原无论任何状态 -> WARP IPv6 |
d |
原无论任何状态 -> WARP 双栈 |
o |
WARP 开关,脚本主动判断当前状态,自动开或关 |
u |
卸载 WARP |
n |
断网时,用于刷WARP网络 (WARP bug) |
b |
升级内核、开启BBR及DD |
a |
免费 WARP 账户升级 WARP+ |
a lisence |
在上面基础上把 WARP+ Lisence 添加进去,如 bash menu.sh a N5670ljg-sS9jD334-6o6g4M9F |
p |
刷 Warp+ 流量 |
c |
安装 WARP Linux Client,开启 Socks5 代理模式 |
l |
安装 WARP Linux Client,开启 WARP 模式 |
c lisence |
在上面基础上把 WARP+ Lisence 添加进去,如 bash menu.sh c N5670ljg-sS9jD334-6o6g4M9F |
r |
WARP Linux Client 开关 |
v |
同步脚本至最新版本 |
i |
更换 WARP IP |
e |
安装 iptables + dnsmasq + ipset 分流流媒体方案 |
w |
安装 WireProxy 解决方案 |
y |
WireProxy 开关 |
k |
切换 wireguard 内核 / wireguard-go-reserved |
g |
切换 warp 全局 / 非全局 或首次以 非全局 模式安装 |
s |
s 4/6/d,切换优先级 warp IPv4 / IPv6 / 默认 |
其他或空值 |
菜单界面 |
举例:想为 IPv4 的甲骨文添加 Warp 双栈,首次运行
wget -N https://gitlab.com/fscarmen/warp/-/raw/main/menu.sh && bash menu.sh d
刷日本 Netflix 运行
warp i jp
通过 warp 解锁 chatGPT 的方法
方法原创,转引用请标明本项目出处。
适合范围: 除大陆、香港和美国 LA 外的所有 VPS,因为这些地方没有 wgcf 的 warp 服务
思路是使用已经注册的 warp 做链式代理的设置,此解决方法是最轻便的,用户只要有 xray 即可。具体做法是修改 xray 配置文件的 outbound 和 routing,模板如下
{
"outbounds":[
{
"protocol":"freedom",
"tag": "direct"
},
{
"protocol":"wireguard",
"settings":{
"secretKey":"YFYOAdbw1bKTHlNNi+aEjBM3BO7unuFC5rOkMRAz9XY=", // 粘贴你的 "private_key" 值
"address":[
"172.16.0.2/32",
"2606:4700:110:8a36:df92:102a:9602:fa18/128"
],
"peers":[
{
"publicKey":"bmXOC+F1FxEMF9dyiK2H5/1SUtzH0JuVo51h2wPfgyo=",
"allowedIPs":[
"0.0.0.0/0",
"::/0"
],
"endpoint":"engage.cloudflareclient.com:2408" // 或填写 162.159.193.10:2408 或 [2606:4700:d0::a29f:c001]:2408
}
],
"reserved":[78, 135, 76], // 粘贴你的 "reserved" 值
"mtu":1280
},
"tag":"wireguard"
},
{
"protocol":"freedom",
"settings":{
"domainStrategy":"UseIPv4"
},
"proxySettings":{
"tag":"wireguard"
},
"tag":"warp-IPv4"
},
{
"protocol":"freedom",
"settings":{
"domainStrategy":"UseIPv6"
},
"proxySettings":{
"tag":"wireguard"
},
"tag":"warp-IPv6"
}
],
"routing":{
"domainStrategy":"AsIs",
"rules":[
{
"type":"field",
"domain":[
"geosite:openai",
"ip.gs"
],
"outboundTag":"warp-IPv4"
},
{
"type":"field",
"domain":[
"geosite:netflix",
"p3terx.com"
],
"outboundTag":"warp-IPv6"
}
]
}
}
刷 Netflix 解锁 WARP IP 的方法
也可以用另一个通过 WARP 解锁流媒体的一键脚本: 【刷 WARP IP】 - 为 WARP 解锁流媒体而生
以刷 香港 hk 为例
-
screen 多会话方式运行,会话任务名为 n
screen -USdm n warp i hk ##创建名为 n 的会话
screen -Udr n ##进入会话 n 看运行情况
## 按 Ctrl+a 再按 d 退出话 n,返回主界面
screen -ls ##查看会话窗口列表
screen -SX n quit ##关闭会议 n,结束运行
-
nohup & 后台运行方式,把结果输出到 log 文件
nohup warp i hk > logs 2>&1 & ##放进后台运行
jobs -l | grep warp ##看后台任务
cat logs ##查看运行日志文件
kill -9 $(jobs -l | grep warp | awk '{print $2}') ##结束进程
-
crobtab 计划任务
echo '@reboot root warp i hk' >>/etc/crobtab ##在计划任务里加入一条新任务
sed -i '/warp i/d' /etc/crontab ##删掉计划任务
kill -9 $(pgrep -f warp) ##杀掉正在运行的进程
-
另外遇到问题仍然需要用户有一定的处理能力,如结束时没有网络,可以用 warp o
开关来获取,因此并没有写死在脚本里了。
-
如果长时间仍然未刷出解锁IP,可以查查 CloudFlare 当地是否在维护调路由:https://www.cloudflarestatus.com/
指定网站分流到 socks5 的 xray 配置模板 (适用于 WARP Client Proxy 和 WireProxy)
本地 socks5://127.0.0.1:40000
并安装 mack-a 八合一脚本 为例。编辑 /etc/v2ray-agent/xray/conf/10_ipv4_outbounds.json
{
"outbounds":[
{
"protocol":"freedom"
},
{
"tag":"warp",
"protocol":"socks",
"settings":{
"servers":[
{
"address":"127.0.0.1",
"port":40000 // 填写你的 socks5 端口
}
]
}
},
{
"tag":"WARP-socks5-v4",
"protocol":"freedom",
"settings":{
"domainStrategy":"UseIPv4"
},
"proxySettings":{
"tag":"warp"
}
},
{
"tag":"WARP-socks5-v6",
"protocol":"freedom",
"settings":{
"domainStrategy":"UseIPv6"
},
"proxySettings":{
"tag":"warp"
}
}
],
"routing":{
"rules":[
{
"type":"field",
"domain":[
"geosite:openai",
"ip.gs"
],
"outboundTag":"WARP-socks5-v4"
},
{
"type":"field",
"domain":[
"geosite:google",
"geosite:netflix",
"p3terx.com"
],
"outboundTag":"WARP-socks5-v6"
}
]
}
}
指定网站分流到 "interface" 的 xray 配置模板(适用于 WARP Client Warp 和 warp / warp-go 非全局)
{
"outbounds":[
{
"protocol":"freedom"
},
{
"tag":"WARP-interface-v4",
"protocol":"freedom",
"settings":{
"domainStrategy":"UseIPv4"
},
"streamSettings":{
"sockopt":{
"interface":"CloudflareWARP", // warp 非全局模式填 warp; Client 的 Proxy 模式填 CloudflareWARP; warp-go 填 WARP
"tcpFastOpen":true
}
}
},
{
"tag":"WARP-interface-v6",
"protocol":"freedom",
"settings":{
"domainStrategy":"UseIPv6"
},
"streamSettings":{
"sockopt":{
"interface":"CloudflareWARP",
"tcpFastOpen":true
}
}
}
],
"routing":{
"domainStrategy":"AsIs",
"rules":[
{
"type":"field",
"domain":[
"geosite:google",
"geosite:openai",
"ip.gs"
],
"outboundTag":"WARP-interface-v4"
},
{
"type":"field",
"domain":[
"geosite:netflix",
"p3terx.com"
],
"outboundTag":"WARP-interface-v6"
}
]
}
}
warp-go 运行脚本
首次运行
wget -N https://gitlab.com/fscarmen/warp/-/raw/main/warp-go.sh && bash warp-go.sh [option] [lisence]
再次运行
warp-go [option] [lisence]
[option] 变量1 变量2 |
具体动作说明 |
h |
帮助 |
4 |
原无论任何状态 -> WARP IPv4 |
4 lisence name |
把 WARP+ Lisence 和设备名添加进去,如 bash wire-go 4 N5670ljg-sS9jD334-6o6g4M9F Goodluck |
6 |
原无论任何状态 -> WARP IPv6 |
d |
原无论任何状态 -> WARP 双栈 |
o |
warp-go 开关,脚本主动判断当前状态,自动开或关 |
u |
卸载 warp-go |
a |
免费 WARP 账户升级 WARP+ |
a lisence name |
在上面基础上把 WARP+ Lisence 和设备名添加进去,如 bash menu.sh a N5670ljg-sS9jD334-6o6g4M9F Goodluck |
v |
同步脚本至最新版本 |
其他或空值 |
菜单界面 |
Cloudflare api 运行脚本
wget -N https://gitlab.com/fscarmen/warp/-/raw/main/api.sh && bash api.sh [option]
[option] 变量 |
具体动作说明 |
-h/--help |
帮助 |
-f/--file |
保存账户注册信息的文件,支持官方api,client,wgcf 和 warp-go ,不填则手动输入 device id 和 api token |
-r/--register |
注册账户 |
-t/--token |
-r 注册时,使用 team token 注册,快速获取: https://web--public--warp-team-api--coia-mfs4.code.run |
-d/--device |
获取账户注册信息,包括 plus 流量等 |
-a/--app |
获取 app 信息 |
-b/--bind |
获取绑定设备信息,包括子设备 |
-n/--name |
修改设备名称 |
-l/--license |
修改 license |
-u/--unbind |
解绑设备 |
-c/--cancle |
注销账户 |
-i/--id |
显示 cliend id 与 reserved |
WARP+ License 及 ID 获取
以下是使用WARP和Team后 Argo 2.0 的官方介绍:Argo 2.0: Smart Routing Learns New Tricks
引用Luminous大神原话:实际测试WARP+在访问非CF的网站速度上和免费版没有差异,只有在访问CloudFlare的站点时付费版会通过Argo类似的技术通过与目标较近的数据中心前往源站,而免费版是仅限于连接地前往源站,仅此而已。
WARP 网络接口数据,临时、永久关闭和开启
WireGuard 网络接口数据,查看 wg
临时关闭和开启 WARP(reboot重启后恢复开启) warp o
官方原始指令 wg-quick down wgcf
,恢复启动 wg-quick up wgcf
禁止开机启动 systemctl disable --now wg-quick@wgcf
,恢复开机启动 systemctl enable --now wg-quick@wgcf
WARP Teams 获取并用于 Linux 的方法
-
通过 Coia 的网站,填入 teams 的组织名、邮箱和验证码获取 token: https://web--public--warp-team-api--coia-mfs4.code.run/
-
在 vps 里运行以下指令获取 teams 配置的全部信息,保存在文件 warp-account.conf
bash <(wget -qO- https://gitlab.com/fscarmen/warp/-/raw/main/api.sh) -r -t <TOKEN>
WARP原理
WARP是CloudFlare提供的一项基于WireGuard的网络流量安全及加速服务,能够让你通过连接到CloudFlare的边缘节点实现隐私保护及链路优化。
其连接入口为双栈(IPv4/IPv6均可),且连接后能够获取到由CF提供基于NAT的IPv4和IPv6地址,因此我们的单栈服务器可以尝试连接到WARP来获取额外的网络连通性支持。这样我们就可以让仅具有IPv6的服务器访问IPv4,也能让仅具有IPv4的服务器获得IPv6的访问能力。
原理如图,IPv4的流量均被WARP网卡接管,实现了让IPv4的流量通过WARP访问外部网络。
原理如图,IPv6的流量均被WARP网卡接管,实现了让IPv6的流量通过WARP访问外部网络。
有时我们的服务器本身就是双栈的,但是由于种种原因我们可能并不想使用其中的某一种网络,这时也可以通过WARP接管其中的一部分网络连接隐藏自己的IP地址。至于这样做的目的,最大的意义是减少一些滥用严重机房出现验证码的概率;同时部分内容提供商将WARP的落地IP视为真实用户的原生IP对待,能够解除一些基于IP识别的封锁。
- 网络性能方面:内核集成>内核模块>wireguard-go
Linux 5.6 及以上内核则已经集成了 WireGuard ,可以用 hostnamectl
或uname -r
查看版本。
甲骨文是 KVM 完整虚拟化的 VPS 主机,而官方系统由于版本较低,在不更换内核的前提下选择 "内核模块" 方案。如已升级内核在5.6及以上,将会自动选择 “内核集成” 方案。
EUserv是 LXC 非完整虚拟化 VPS 主机,共享宿主机内核,不能更换内核,只能选择 "wireguard-go" 方案。
鸣谢下列作者的文章和项目
互联网永远不会忘记,但人们会。
技术文章或相关项目(排名不分先后):
服务提供(排名不分先后):
CloudFlare WARP 全球站点和服务状态: