chuck-nvim

A Neovim plugin for ChucK offering granular control and a WebChucK-like layout built with NUI.

An example session recorded with asciinema. For some reason colors were not recorded. The UI looks like this

Temporary features

• Set icon for .ck filetype (until nerd-font native support)

Installation

To use chuck-nvim, you need to have:

• Neovim 0.10 or up.
• The tail command in your path.
• ChucK installed on your system.

Installing ChucK

To download and install ChucK, visit the official ChucK release page. For more information, including documentation, examples, research publications, and community resources, visit the ChucK homepage.

Homebrew

brew install chuck

Installing chuck-nvim

lazy.nvim

{
  "gacallea/chuck-nvim",
  version = "*",
  dependencies = {
    { "MunifTanjim/nui.nvim" },
    { -- until https://github.com/gacallea/chuck-nvim/issues/3
      "nvim-tree/nvim-web-devicons",
      opts = {
        override_by_extension = {
          ["ck"] = {
            icon = "󰧚",
            color = "#80ff00",
            name = "ChucK",
          },
        },
      },
    },
  },
  ft = { "chuck" },
  opts = {}, -- see configuration
  cmd = {
    "ChuckLoop",
    "ChuckStatus",
    "ChuckTime",
    "ChuckAddShred",
    "ChuckRemoveShreds",
    "ChuckReplaceShred",
    "ChuckClearShreds",
    "ChuckClearVM",
    "ChuckExit",
  },
  keys = {}, -- see key mappings
}

Configuration

chuck-nvim options to configure this plugin, and a subset of ChucK VM's command-line options.

-- default values:
opts = {
  autorun = false,
  layout = "webchuck", -- or "chuck_on_top"
  chuck_vm = {
    log_level = 1,
    srate = 44100,
    bufsize = 512,
    dac = 0,
    adc = 0,
    channels = 2,
    input = 2,
    output = 2,
    remote = "127.0.0.1",
    port = 8888,
  },
},

Usage

chuck-nvim provides the following functions to interact with the ChucK VM.

ChuckLoop

Starts ChucK in loop mode with chuck --loop using the configuration values.

[!TIP] You can enable autorun to launch ChucK and the UI automatically.

ChuckStatus

Prints current time and active shreds status in the ChucK VM.

ChuckTime

Prints the ChucK VM's full time information in the ChucK VM.

ChuckAddShred

Adds the current saved buffer to the ChucK VM, as an active shred.

[!NOTE] You must save file changes beforehand.

ChuckRemoveShreds

Prompts the user for shred(s) number(s), then removes them from ChucK.

[!TIP] To remove more than one shred, enter the numbers separated by spaces.

ChuckReplaceShred

Prompts the user for a shred number, then replaces it with the current buffer.

ChuckClearShreds

Removes all active shreds.

ChuckClearVM

Removes all active shreds and resets the type system.

ChuckExit

Cleanly exits the VM, cleans out logs, and quits ChucK.

Key mappings

chuck-nvim doesn't set any key mappings by default. Below, an example configuration for LazyVim.

[!WARNING] Make sure these don't conflict with existing mappings.

[!TIP] You could map the commands to function keys to speed up operations.

return {
  {
    "folke/which-key.nvim",
    opts = {
      defaults = {
        ["<leader>C"] = { name = "+chuck" },
      },
    },
  },
  {
    "gacallea/chuck-nvim",
    version = "*",
    dependencies = {
      { "MunifTanjim/nui.nvim" },
      { -- until https://github.com/gacallea/chuck-nvim/issues/3
        "nvim-tree/nvim-web-devicons",
        opts = {
          override_by_extension = {
            ["ck"] = {
              icon = "󰧚",
              color = "#80ff00",
              name = "ChucK",
            },
          },
        },
      },
    },
    ft = { "chuck" },
    opts = {},
    cmd = {
      "ChuckLoop",
      "ChuckStatus",
      "ChuckTime",
      "ChuckAddShred",
      "ChuckRemoveShreds",
      "ChuckReplaceShred",
      "ChuckClearShreds",
      "ChuckClearVM",
      "ChuckExit",
    },
    keys = {
      { mode = "n", "<leader>Cl", "<cmd>ChuckLoop<cr>", desc = "Chuck Loop" },
      { mode = "n", "<leader>Cs", "<cmd>ChuckStatus<cr>", desc = "Chuck Status" },
      { mode = "n", "<leader>Ct", "<cmd>ChuckTime<cr>", desc = "Chuck Time" },
      { mode = "n", "<leader>Ca", "<cmd>ChuckAddShred<cr>", desc = "Add Shred" },
      { mode = "n", "<leader>Cd", "<cmd>ChuckRemoveShreds<cr>", desc = "Remove Shred(s)" },
      { mode = "n", "<leader>Cr", "<cmd>ChuckReplaceShred<cr>", desc = "Replace Shred" },
      { mode = "n", "<leader>Cc", "<cmd>ChuckClearShreds<cr>", desc = "Clear Shreds" },
      { mode = "n", "<leader>Cv", "<cmd>ChuckClearVM<cr>", desc = "Clear VM" },
      { mode = "n", "<leader>Ce", "<cmd>ChuckExit<cr>", desc = "Exit ChucK" },
    },
  },
}

License

The code of this repository is licensed under the GPLv2 for compatibility with ChucK licensing.