Stop wasting your time rewriting the training, evaluation & visualization procedures for your ML model: let DyTB do the work for you!
DyTB is compatible with: Tensorflow 1.x & Python >= 3.5
TL;DR: pip install dytb + python-notebook with a complete example.
The standard workflow is extremely simple:
DyTB comes with some common ML model, like LeNet & VGG, if you want to test how these models perform when trained on different datasets and/or with different hyperparameters, just use it.
Instead, if you want to define your own model just implement one of the available interfaces, depending on ML model you want to implement. The available interfaces are:
It's recommended, but not strictly required, to use the wrappers built around the Tensorflow methods to define the model: these wrappers creates log and visualizations for you. Wrappers are documented and intuitive: you can find it in the dytb/models/utils.py file.
DyTB provides different models that can be used alone or can be used as examples of correct implementations. Every model in the dytb/models/predefined/ folder is a valid example.
In general, the model definition is just the implementation of 2 methods:
get is which implementing the model itselfloss in which implementing the loss functionIt's strictly required to return the parameters that the method documentation requires to, even if they're unused by your model.
E.g.: even if you never use a is_training_ boolean placeholder in your model definition, define it and return it anyway.
DyTB comes with some common ML benchmark, like Cifar10, Cifar100 & MNIST, you can use it to train and measure the performances of your model or you can define your own input source implementing the Input interface that you can find here:
The interface implementation should follow these points:
__init__ method: this method must download the dataset and apply the desired transformations to its elements. There are some utility functions defined in the inputs/utils.py file that can be used.
This method is executed as first operation when the dataset object is created, therefore is recommended to cache the results.num_classes method: this method must return the number of classes of the dataset. If your dataset has no labels, just return 0.num_examples(input_type) method: this method accepts an InputType enumeration, defined in inputs/utils.py.
This enumeration has 3 possible values: InputType.train, InputType.validation, InputType.test. As obvious, the method must return the number of examples for every possible value of this enumeration.inputs method. The inputs method is a general method that should return the real values of the dataset, related to the InputType passed, without any augmentation. The augmentations are defined at training time.Note: inputs must return a Tensorflow queue of value, label pairs.
The better way to understand how to build the input source is to look at the examples in the dytb/inputs/predefined/ folder. A small and working example that can be worth looking is Cifar10: dytb/inputs/predefined/Cifar10.py.
Train measuring predefined metrics it's extremely easy, let's see a complete example:
import pprint
import tensorflow as tf
from dytb.inputs.predefined import Cifar10
from dytb.train import train
from dytb.models.predefined.VGG import VGG
# Instantiate the model
vgg = VGG()
# Instantiate the CIFAR-10 input source
cifar10 = Cifar10.Cifar10()
# 1: Train VGG on Cifar10 for 50 epochs
# Place the train process on GPU:0
device = '/gpu:0'
with tf.device(device):
info = train(
model=vgg,
dataset=cifar10,
hyperparameters={
"epochs": 50,
"batch_size": 50,
"regularizations": {
"l2": 1e-5,
"augmentation": {
"name": "FlipLR",
"fn": tf.image.random_flip_left_right,
# factor is the estimated amount of augmentation
# that "fn" introduces.
# In this case, "fn" doubles the training set size
# Thus, an epoch is now seen as the original training
# training set size * 2
"factor": 2,
}
},
"gd": {
"optimizer": tf.train.AdamOptimizer,
"args": {
"learning_rate": 1e-3,
"beta1": 0.9,
"beta2": 0.99,
"epsilon": 1e-8
}
}
})Finish!
At the end of the training process info will contain some useful information, let's (pretty) print them:
pprint.pprint(info, indent=4){ 'args': { 'batch_size': 50,
'checkpoint_path': '',
'comment': '',
'dataset': <dytb.inputs.Cifar10.Cifar10 object at 0x7f896c19a1d0>,
'epochs': 2,
'exclude_scopes': '',
'force_restart': False,
'gd': { 'args': { 'beta1': 0.9,
'beta2': 0.99,
'epsilon': 1e-08,
'learning_rate': 0.001},
'optimizer': <class 'tensorflow.python.training.adam.AdamOptimizer'>},
'lr_decay': {'enabled': False, 'epochs': 25, 'factor': 0.1},
'model': <dytb.models.VGG.VGG object at 0x7f896c19a128>,
'regularizations': { 'augmentation': <function random_flip_left_right at 0x7f89109cb0d0>,
'l2': 1e-05},
'trainable_scopes': ''},
'paths': { 'best': '/mnt/data/pgaleone/dytb_work/examples/log/VGG/CIFAR-10_Adam_l2=1e-05_fliplr/best',
'current': '/mnt/data/pgaleone/dytb_work/examples',
'log': '/mnt/data/pgaleone/dytb_work/examples/log/VGG/CIFAR-10_Adam_l2=1e-05_fliplr'},
'stats': { 'dataset': 'CIFAR-10',
'model': 'VGG',
'test': 0.55899998381733895,
'train': 0.5740799830555916,
'validation': 0.55899998381733895},
'steps': {'decay': 25000, 'epoch': 1000, 'log': 100, 'max': 2000}}Here you can see a complete example of training, continue an interrupted training, fine tuning & transfer learning: python-notebook with a complete example.
The only prerequisite is to install DyTB via pip.
pip install --upgrade dytbDyTB adds to your $PATH two executables: dytb_train and dytb_evaluate.
The CLI workflow is the same as the library one, with 2 differences:
If you define your own input source / model, it must be placed into the appropriate folder:
Rule: the class name must be equal to the file name. E.g.: class LeNet into LeNet.py file.
If you want to use a predefined input/model you don't need to do anything.
Every single hyperparameter (except for the augmentations) definable in the Python version, can be passed as CLI argument to the dytb_train script.
A single model can be trained using various hyper-parameters, such as the learning rate, the weight decay penalty applied, the exponential learning rate decay, the optimizer and its parameters, ...
DyTB allows training a model with different hyper-parameter and automatically it logs every training process allowing the developer to visually compare them.
Moreover, if a training process is interrupted, it automatically resumes it from the last saved training step.
# LeNet: no regularization
dytb_train --model LeNet --dataset MNIST
# LeNet: L2 regularization with value 1e-5
dytb_train --model LeNet --dataset MNIST --l2_penalty 1e-5
# LeNet: L2 regularization with value 1e-2
dytb_train --model LeNet --dataset MNIST --l2_penalty 1e-2
# LeNet: L2 regularization with value 1e-2, initial learning rate of 1e-4
# The default optimization algorithm is MomentumOptimizer, so we can change the momentum value
# The optimizer parameters are passed as a json string
dytb_train --model LeNet --dataset MNIST --l2_penalty 1e-2 \
--optimizer_args '{"learning_rate": 1e-4, "momentum": 0.5}'
# If, for some reason, we interrupt this training process, rerunning the same command
# will restart the training process from the last saved training step.
# If we want to delete every saved model and log, we can pass the --restart flag
dytb_train --model LeNet --dataset MNIST --l2_penalty \
--optimizer_args '{"learning_rate": 1e-4, "momentum": 0.5}' --restartThe commands above will create 4 different models. Every model has it's own log folder that shares the same root folder.
In particular, in the log folder there'll be a LeNet folder and within this folder, there'll be other 4 folders, each one with a name that contains the hyper-parameters previously defined.
This allows visualizing in the same graphs, using Tensorboard, the 4 models and easily understand which one performs better.
No matter what interface has been implemented, the script to run is always train.py: it's capable of identifying the type of the model and use the right training procedure.
A complete list of the available tunable parameters can be obtained running dytb_train --help (dytb_train --help).
For reference, a part of the output of dytb_train --help:
usage: train.py [-h] --model --dataset
-h, --help show this help message and exit
--model {<list of models in the models/ folder, without the .py suffix>}
--dataset {<list of inputs in the inputs/folder, without the .py suffix}
--batch_size BATCH_SIZE
--restart restart the training process DELETING the old
checkpoint files
--lr_decay enable the learning rate decay
--lr_decay_epochs LR_DECAY_EPOCHS
decay the learning rate every lr_decay_epochs epochs
--lr_decay_factor LR_DECAY_FACTOR
decay of lr_decay_factor the initial learning rate
after lr_decay_epochs epochs
--l2_penalty L2_PENALTY
L2 penalty term to apply ad the trained parameters
--optimizer {<list of tensorflow available optimizers>}
the optimizer to use
--optimizer_args OPTIMIZER_ARGS
the optimizer parameters
--epochs EPOCHS number of epochs to train the model
--train_device TRAIN_DEVICE
the device on which place the the model during the
trining phase
--comment COMMENT comment string to preprend to the model name
--exclude_scopes EXCLUDE_SCOPES
comma separated list of scopes of variables to exclude
from the checkpoint restoring.
--checkpoint_path CHECKPOINT_PATH
the path to a checkpoint from which load the modelNo matter if the CLI or the library version is used: DyTB saves for you in the log folder of every model the "best" model with respect to the default metric used for the trained model.
For example, for the LeNet model created with the first command in the previous script, the following directory structure is created:
log/LeNet/
|---MNIST_Momentum
|-----best
|-----train
|-----validationtrain and validation folders contain the logs, used by Tensorboard to display in the same graphs train and validation metrics.
The best folder contains one single checkpoint file that is the model with the highest quality obtained during the training phase.
This model is used at the end of the training process to evaluate the model performance.
Moreover, is possible to run the evaluation of any checkpoint file (in the log/<MODEL> folder or in the log/<MODEL>/best folder) using the dytb_evaluate script.
For example:
# Evaluate the validation accuracy
dytb_evaluate --model LeNet \
--dataset MNIST \
--checkpoint_path log/LeNet/MNIST_Momentum/
# outputs something like: validation accuracy = 0.993
# Evaluate the test accuracy
dytb_evaluate --model LeNet \
--dataset MNIST \
--checkpoint_path log/LeNet/MNIST_Momentum/ \
--test
# outputs something like: test accuracy = 0.993A trained model can be used to build a new model exploiting the learned parameters: this helps to speed up the learning process of new models.
DyTB allows to restore a model from its checkpoint file, remove some layer that's not necessary for the new model, and add new layers to train.
For example, a VGG model trained on the Cifar10 dataset, can be used to train a VGG model but on the Cifar100 dataset.
The examples are for the CLI version, but the same parameters can be used in the Python library.
dytb_train
--model VGG \
--dataset Cifar100 \
--checkpoint_path log/VGG/Cifar10_Momentum/best/ \
--exclude_scopes softmax_linearThis training process loads the "best" VGG model weights trained on Cifar10 from the checkpoint_path, then the weights are used to initialize the VGG model (so the VGG model must be compatible, at least for the non excluded scopes, to the loaded model) except for the layers under the excluded_scopes list.
Then the softmax_linear layers are replaced with the ones defined in the VGG model, that when trained on Cifar100 adapt themself to output 100 classes instead of 10.
So the above command starts a new training from the pre-trained model and trains the new output layer (with 100 outputs) that the VGG model defines, refining every other weights imported.
If you don't want to train the imported weights, you have to point out which scopes to train, using trainable_scopes:
dytb_train \
--model VGG \
--dataset Cifar100 \
--checkpoint_path log/VGG/Cifar10_Momentum/best/ \
--exclude_scopes softmax_linear \
--trainable_scopes softmax_linearWith the above command your instructing DyTB to exclude the softmax_linear scope from the checkpoint_file and to train only the scope named softmax_linear in the new defined model.
Running tensorboard
tensorboard --logdir log/<MODEL>It's possible to visualize the trend of the loss, the validation measures, the input values and so on. To see some of the produced output, have a look at the implementation of the Convolutional Autoencoder, described here: https://pgaleone.eu/neural-networks/deep-learning/2016/12/13/convolutional-autoencoders-in-tensorflow/#visualization