Brother Drivers (T83)

[celticmagic]

MeansWell (#John-Poot), 2016-08-07 12:50:03 UTC

The drivers are available from Brother - as either RPM or DEB. While RPM Solus trickery can allow an install of sorts - no print no facs. Result as complaints of no cupswrapper and permissions difficulties with Cups itself. Additionally, Scanner detection does not happen correctly. All-in-all, a fail. Specifically, the driver(s) being requested are for Brother MFC-L2703DW, and Brother describes these as MFC-L2700 series. This printer is mass-market in Australia, sold through the largest office supply chain, so they're not at all rare. The drivers appear to be generic monochrome MFC Laser printers in the brother range. Brother website specifies differing procedures pre-install, depending on the relevant Linux install. Solus is 'different'. Supplemental (#DataDrake) ==================== **Driver Frontpage:** http://support.brother.com/g/s/id/linux/en/index.html?c=us_ot&lang=en&comple=on&redirect=on **Printers Requested:** # Before requesting a Printer, please check if it's already packaged **Needs testing** (Please comment if it's working) - brlaser [Download Link](https://drive.google.com/open?id=1FoJ8N9mbgXgiFEG_FhJhxFqldXdU5_b1) - Brscan3 [Download Link](https://drive.google.com/open?id=1CFv1Mh5Xyg4S6ZNJbcdJ5O4RUYHzYJy5) | **DCP Printers** | | **Model**|**Download Link** | | DCP-195c | [Link](https://drive.google.com/open?id=18jTkTxLNcHmWAMgBMHJgeDGkXEE4ZKFT) | | DCP-7040 | [Link](https://drive.google.com/open?id=1U6jRDJ6EV7ZMDpSpabPx5BqAXLQeJDl8) | | DCP-7057 | [Link](https://drive.google.com/open?id=1oEZKPR_txlYuF1CvPRUr3Df7hJc-c3Kj) | | DCP-7065DN | [Link](https://drive.google.com/open?id=1WWbK87e-jWoycoYE9SmxgDWBVV04c4mn) | | DCP-9020DCW | [Link](https://drive.google.com/open?id=1XMEo-1XAUclbZ6BvatqeUY1KToEst63r) | | DCP-J140W | [Link](https://drive.google.com/open?id=1OnyvqGttALGo7iVGzFQlLVrMHnNRsVrg) | | DCP-J515W | [Link](https://drive.google.com/open?id=1cMWawlfbBrhsLw_7DTtnnunTGbBZO7-4) | | DCP-J562DW | [Link](https://drive.google.com/open?id=1wshRj9vdgwUd13BNG64oHTpr5kYLeuYH) | | DCP-L2512D | [Link](https://drive.google.com/open?id=1dTrXocVUpzw5YG3fIDFHUR-NJVVIHe9j) | | DCP-T310 | [Link](https://drive.google.com/open?id=1VW8taOmnWsC5m1tj90RePKRT6lvA0kRN) | | **HL Printers** | | **Model**|**Download Link** | | HL-1240 | [Link](https://drive.google.com/open?id=1-n3R_WJtIrSfUQ0mXQCynpCtatpBLWIK) | | HL-2130 | [ Link](https://drive.google.com/open?id=1VZxL8nBXcFqKbGGQDCOSEL_KDgWbNUz3) | | HL-2280DW | [Link](https://drive.google.com/open?id=15wX8M8jhbeC1zDZDa-TT4Qce_vSbZN-v) | | HL-3140CW | [ Link](https://drive.google.com/open?id=1rOTdpPWL1d3PQcXe7oSeA6tEu5iDVqVy) | | HL-3152CDW | [Link](https://drive.google.com/open?id=1U4_q8AyirUcBYxWUyK62Z213g_Am1auF) | | HL-3170CDW | [Link](https://drive.google.com/open?id=1xMlJoPTAaVllWYFWxmbvMwipcpBS3GiH) | | HL-L2340DW | [ Link](https://drive.google.com/open?id=1piUoGhF_7Ot5Vu_9_YRFEwf4SA6sNRVL) | | **MFC Printers** | | **Model**|**Download Link** | | MFC-3750CDW | | | MFC-5890CN | [Link](https://drive.google.com/open?id=12dpc3nsNi2p10Q296-agIH3ff6Qj-nmq) | | MFC-7420 | [Link](https://drive.google.com/open?id=1wol_jJJsb_zPoHA2G2xNq_MGwq8jgJom) | | MFC-7460DN | [ Link](https://drive.google.com/open?id=1EW1HmM7eL07LSmGIHYqne2_TCIPzizav) | | MFC-9125CN | [ Link](https://drive.google.com/open?id=1QpXWjy4IseduWcqMSdj8NiyExuxXWHHg) | | MFC-J1100DW | | | MFC-J1300DW | | | MFC-J430W | [ Link](https://drive.google.com/open?id=1-5R2sO_RCv_A4XbsyN3YftkEi2kWH4tn) | | MFC-J435W | [ Link](https://drive.google.com/open?id=1ijYh-ZdGzYUQ1pRSr_uHTnYB4oVsW6Ng) | | MFC-J4420DW | [ Link](https://drive.google.com/open?id=1sDWQSkpuvJp3FOf84NU4Mf3okw3s6MBx) | | MFC-J4620DW | [ Link](https://drive.google.com/open?id=1tu_yT6APr9E07TgV66lshr-gMB_tiY66) | | MFC-J470DW | [ Link](https://drive.google.com/open?id=1xVp95zya0Zj-jTpu4JKV58StLIDZj9eG) | | MFC-J491DW | | | MFC-J5320DW | [ Link](https://drive.google.com/open?id=1zfCKGp_aJ5pe2rOgSVPMT2bDamFZVw2_) | | MFC-J5330DW | [ Link](https://drive.google.com/open?id=1HA-i5n9g1_ZHv1-SdEjN2OdqFFif2Zpq) | | MFC-J5720DW | [ Link](https://drive.google.com/open?id=1wU3rMgcRa9Nk4AQGSPKEpVFK0SUEoPl0) | | MFC-J6520DW | [ Link](https://drive.google.com/open?id=1Q9XLRIL28YH-rd2KnEOTnbPxnc_zSioY) | | MFC-J6530DW | [ Link](https://drive.google.com/open?id=1HA-i5n9g1_ZHv1-SdEjN2OdqFFif2Zpq) | | MFC-J6720DW | [ Link](https://drive.google.com/open?id=1NpaPN5_6LMADgInFB1dnSyqhU8KwXA00) | | MFC-L2710DW | [ Link](https://drive.google.com/open?id=1pDV51ThmtqdXG48EAIeAN5wlM0lehdJR) | | MFC-L2720DW | [ Link]() | | MFC-J805DW | | | MFC-J885DW | [ Link](https://drive.google.com/open?id=1Z_b6_A2svkCD-vXbAkW3gQO9WmpBsXUS) | | MCF-L8650CDW | | | MFC-L8850CDW | | **No Linux drivers** - DCP-71010L

[celticmagic]

FvG (#Girtablulu), 2018-10-12 13:26:42 UTC

#arturjpv could please test this brother package? https://drive.google.com/open?id=1gzYL5kUY2GUZt40B-ZU8PXR-uD05xzll I saw we do not have it inside our repo yet, so I packaged it quick. Can you test if everything working and if it's even solves your problem in T4832 ?

[celticmagic]

Arturo J. Pérez (#arturjpv), 2018-10-12 18:08:11 UTC

Hello #Girtablulu, Thanks! Everything is working now. When my problem was happening "Brother DCP-L2520DW series, driverless, cups-filters 1.21.2" was selected. After installing the provided package with "sudo eopkg install brother-dcpl2520dw-3.2.0_1-1-1-x86_64.eopkg" I selected the "Brother DCP-L2520DW for CUPS" driver and everything is working! How is this package going to be included/installed in Solus? With DoFlicky (Solus Driver Management)? Greetings

[celticmagic]

FvG (#Girtablulu), 2018-10-12 18:59:15 UTC

#arturjpv I requested the inclusion into the repo D4023, after it got accepted you can install it over the package Manager

[celticmagic]

FvG (#Girtablulu), 2018-10-12 19:14:15 UTC

#alecbcs I saw you have a brother printer but not the driver, would you please test this package and confirm if it's working? https://drive.google.com/open?id=1piUoGhF_7Ot5Vu_9_YRFEwf4SA6sNRVL

[celticmagic]

André Fettouhi (#afettouhi), 2018-10-12 19:21:24 UTC

#Girtablulu does this go for the hl-l2375dw driver as well?

[celticmagic]

FvG (#Girtablulu), 2018-10-12 19:26:00 UTC

#afettouhi D4013 yep just need the okay by a maintainer

[celticmagic]

FvG (#Girtablulu), 2018-10-14 10:49:16 UTC

#Herde Please download this package https://drive.google.com/open?id=1-6Jh2XQo7MgtfXuFtM3q2TO7Pgj3iQAQ and install 'sudo eopkg it brother-mfc1910w-3.0.1_1-1-1-x86_64.eopkg' and confirm if it's working

[celticmagic]

Richard DENIS (#Herde), 2018-10-14 17:08:16 UTC

Thank you for this feedback, the package works great !!!! I would like to know how you packaged it, I would like to learn by an example If you have a connection, I'm a buyer.

[celticmagic]

brent webster (#brent), 2018-11-12 21:45:20 UTC

Dear Sunny or Anyone on Team: I installed a fresh budgie. This command you made for me is no longer good: sudo eopkg install https://packages.solus-project.com/unstable/b/brother-hll2315dw/brother-hll2315dw-3.2.1-1-1-x86_64.eopkg Terminal returns: ~ $ sudo eopkg install https://packages.solus-project.com/unstable/b/brother-hll2315dw/brother-hll2315dw-3.2.1-1-1-x86_64.eopkg Program terminated. Could not fetch destination file "https://packages.solus-project.com/unstable/b/brother-hll2315dw/brother-hll2315dw-3.2.1-1-1-x86_64.eopkg": [Errno 14] HTTPS Error 503 - Service Unavailable Is there a new place I can retrieve this brother printer package? Thanks--

[celticmagic]

FvG (#Girtablulu), 2018-11-12 21:55:57 UTC

you can find the driver inside the repo, just installed it with > sudo eopkg it brother-hll2315dw

[celticmagic]

brent webster (#brent), 2018-11-12 22:03:34 UTC

>>! In T83#135786, #Girtablulu wrote: > you can find the driver inside the repo, just installed it with > > > >> sudo eopkg it brother-hll2315dw THAT DID IT, thank you so much, I didn't know you migrated these to repo already. Fantastic.

[celticmagic]

Bubba (#CountryfiedLinux), 2018-11-22 07:36:42 UTC

I have a Brother HL-L2320D printer and I noticed the driver isn't available nor on the request list. Can the driver be added please? Thanks.

[celticmagic]

FvG (#Girtablulu), 2018-11-22 10:47:39 UTC

#CountryfiedLinux Can you please download these package and test if your printer is working and report back? https://drive.google.com/open?id=1SXFy-AnM0GKQ1FgVhh0Sv_rKIo4M-5B4

[celticmagic]

Alexander Zhirov (#alexanderzhirov), 2018-12-08 17:44:34 UTC

My printer DCP-7057R not available driver. On the official [website](https://support.brother.com/g/b/downloadtop.aspx?c=ru&lang=ru&prod=dcp7057r_eu) it is present in DEB and RPM. I ask for assistance. We also need a scanner on this MFP.

[celticmagic]

David Harder (#davidjharder), 2018-12-08 18:06:10 UTC

#Girtablulu: I can confirm your package for the HL-L2320D works. No more rpm nonsense required. Thanks.

[celticmagic]

Richard (#rickardjames), 2018-12-11 07:54:51 UTC

Hi there, could I have a package made for the brother MFC-9130CW? Loving this OS so far! Link to page with deb/rpm packages: https://support.brother.com/g/b/downloadtop.aspx?c=ca&lang=en&prod=mfc9130cw_us

[celticmagic]

FvG (#Girtablulu), 2018-12-12 21:44:29 UTC

#rgnrkPAK47 Please download this file and installed it and could you give feedback if everything is working? https://drive.google.com/open?id=150pBGl4j5TDwBIOcqyULUEt_4wN_MzkV #rickardjames Still looking into yours, yours is a bit older and needs some complicated patching

[celticmagic]

Richard (#rickardjames), 2018-12-13 03:20:13 UTC

#Girtablulu No worries. Thanks alot for helping me out!

[celticmagic]

Jason Clark (#SuperJC710e), 2018-12-23 02:44:54 UTC

Thanks for the hard work on building these native drivers. I would like to make a request for our printer. Model: MFC-9330CDW USB: ID 04f9:02af Brother Industries, Ltd MFC-9330CDW The automatically installed printer setup prints, but not correctly, would love to have the full proper driver. Let me know if you need any other information...TIA

[celticmagic]

Pierre-Yves (#kyrios123), 2018-12-24 16:11:51 UTC

>>! In T83#137894, #alexanderzhirov wrote: > My printer DCP-7057R not available driver. On the official [website](https://support.brother.com/g/b/downloadtop.aspx?c=ru&lang=ru&prod=dcp7057r_eu) it is present in DEB and RPM. I ask for assistance. We also need a scanner on this MFP. Hey brother #Girtablulu something for you when you'll be back !

[celticmagic]

FvG (#Girtablulu), 2018-12-27 13:32:08 UTC

#Daywalk3r https://drive.google.com/open?id=1j40iX3IGZvA_W4X1eJKejRE9bXCuSeqD please install and give me a feedback if it's working

[celticmagic]

Reuben Naidoo (#Daywalk3r), 2018-12-27 19:27:56 UTC

#Girtablulu I have downloaded and installed it. It installs fine and I can setup the printer in cups but printing fails with following error Idle - "File "/usr/lib/cups/filter/brother_lpdwrapper_mfc-j200" not available: No such file or directory"

[celticmagic]

Reuben Naidoo (#Daywalk3r), 2018-12-27 19:32:16 UTC

#Girtablulu Do you perhaps have the brscan4 package for scanning as well. I connect to the printer/scanner via wireless network.

[celticmagic]

FvG (#Girtablulu), 2018-12-27 19:35:56 UTC

#Daywalk3r https://drive.google.com/open?id=1qY0qQIgFKUwlMMfHKk5dyqRQiAbBSZcd I changed the installing path slightly

[celticmagic]

FvG (#Girtablulu), 2018-12-27 20:01:00 UTC

And we do have the brscan4 driver inside the repo

[celticmagic]

Reuben Naidoo (#Daywalk3r), 2018-12-27 20:34:42 UTC

#Girtablulu Printing fine now. Thank You

[celticmagic]

FvG (#Girtablulu), 2019-01-17 13:52:25 UTC

could you pls try and report back #alexanderzhirov https://drive.google.com/open?id=1q6YxjFNocUypOFPWJl6USiJlQRmsQ43C #rickardjames https://drive.google.com/open?id=1ls1QZyuDGfAbXYqN21tIKjUd1Xtdhux9 #SuperJC710e https://drive.google.com/open?id=1X3zdvMDbQYFR0YIX6kKXg--vj7tds2sU

[celticmagic]

Alexander Zhirov (#alexanderzhirov), 2019-01-17 19:17:31 UTC

>>! In T83#141988, #Girtablulu wrote: > could you pls try and report back > > #alexanderzhirov > > https://drive.google.com/open?id=1q6YxjFNocUypOFPWJl6USiJlQRmsQ43C #Girtablulu [Installed the driver](https://imgur.com/a/6rTVkNV), but the printer still did not work. After rebooting the system, nothing has changed

[celticmagic]

Richard (#rickardjames), 2019-01-17 19:18:39 UTC

#Girtablulu seems to work on my end.

[celticmagic]

FvG (#Girtablulu), 2019-01-17 20:57:03 UTC

#alexanderzhirov next try https://drive.google.com/open?id=1kejB2ujSwXJwX17zTQMWp0KeIVzOmQVL #rickardjames thx for confirming

[celticmagic]

Alexander Zhirov (#alexanderzhirov), 2019-01-17 21:38:21 UTC

>>! In T83#142023, #Girtablulu wrote: > #alexanderzhirov next try > > https://drive.google.com/open?id=1kejB2ujSwXJwX17zTQMWp0KeIVzOmQVL #Girtablulu [Now the printer is installed!](https://imgur.com/a/IjhQJih) The scanner works perfectly. But the printing of the document does not work. The document is sent to print, but nothing happens and the document just lies in the jobs.

[celticmagic]

FvG (#Girtablulu), 2019-01-17 22:08:48 UTC

#alexanderzhirov https://drive.google.com/open?id=1eB85PSTTnO4OkQY1ABbOXfXAhvFCWz8j changed a permission let's see if this is working

[celticmagic]

benjamin rube (#lukejackson), 2019-01-18 13:49:02 UTC

Hello, I would like to add DCP-135C to the list if possible. i tried printing with the automatically installed drivers, "printing..printing done" nothing happens. I installed RPM and all dependencies.. ``` "mkdir: das Verzeichnis „/var/spool/lpd/dcp135c“ kann nicht angelegt werden: Datei oder Verzeichnis nicht gefunden chown: Zugriff auf '/var/spool/lpd/dcp135c' nicht möglich: Datei oder Verzeichnis nicht gefunden chgrp: Zugriff auf '/var/spool/lpd/dcp135c' nicht möglich: Datei oder Verzeichnis nicht gefunden chmod: Zugriff auf '/var/spool/lpd/dcp135c' nicht möglich: Datei oder Verzeichnis nicht gefunden" ``` Here is the link for the Brother Driver download: https://support.brother.com/g/b/downloadlist.aspx?c=eu_ot&lang=en&prod=dcp135c_eu_as&os=127#SelectLanguageType-558_0_1 thank you, i hope you guys can add my printer, ist the only thing not working so far for me :)

[celticmagic]

Alexander Zhirov (#alexanderzhirov), 2019-01-17 22:19:26 UTC

>>! In T83#142026, #Girtablulu wrote: > #alexanderzhirov https://drive.google.com/open?id=1eB85PSTTnO4OkQY1ABbOXfXAhvFCWz8j changed a permission let's see if this is working No, that didn't solve the [problem](https://imgur.com/a/z7EqwNu) either.

[celticmagic]

FvG (#Girtablulu), 2019-01-17 22:25:31 UTC

#lukejackson I throw it on the list, the issue your driver needs patching so it take a bit. #alexanderzhirov I going to try to reach #sunnyflunk maybe I did a mistake while patching, I'll get back to you

[celticmagic]

Alexander Zhirov (#alexanderzhirov), 2019-01-17 22:32:32 UTC

>>! In T83#142030, #Girtablulu wrote: > #alexanderzhirov I going to try to reach #Girtablulu Maybe I should look at some logs to try to help you figure it out? You just tell me where to look.

[celticmagic]

FvG (#Girtablulu), 2019-01-17 22:45:26 UTC

the only real Idea I have would journalctl I'm not aware of any special "printer log" another idea is start the gnome-control-center -v over terminal and see if anything gets displayed

[celticmagic]

FvG (#Girtablulu), 2019-01-17 22:51:01 UTC

can you try installing brscan4?

[celticmagic]

benjamin rube (#lukejackson), 2019-01-18 12:53:13 UTC

#Girtablulu Thank you, no rush. I can just boot Win to print, but i'd love to format that drive at some point ;) Edit: forgot to add the output of `lsusb` for DCP-135C ``` Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 003: ID 04b4:0101 Cypress Semiconductor Corp. Keyboard/Hub Bus 003 Device 002: ID 1532:0043 Razer USA, Ltd DeathAdder Chroma Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 04f9:01ce Brother Industries, Ltd DCP-135C Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub ```

[celticmagic]

Jason Clark (#SuperJC710e), 2019-01-18 02:26:50 UTC

#Girtablulu > #SuperJC710e > > https://drive.google.com/open?id=1X3zdvMDbQYFR0YIX6kKXg--vj7tds2sU Thanks for the package! I installed it and the printer works without errors, however the printing is not a nice as from my Fedora system, Here's pic to show the difference. The top (left in the non-rotated pic) is the Fedora system, bottom from Solus. Both set for the higher quality colour setting. {F4315320} ``` MFC-9330CDW MFC-9330CDW (Idle, Accepting Jobs, Not Shared, Server Default) Description: Brother MFC-9330CDW Location: Driver: Brother MFC-9330CDW, driverless, cups-filters 1.21.6 (color, 2-sided printing) Connection: dnssd://Brother%20MFC-9330CDW._ipp._tcp.local/?uuid=e3248000-80ce-11db-8000-30055cb896b6 Defaults: job-sheets=none, none media=na_letter_8.5x11in sides=one-sided ``` Is it picking the correct driver? It's the only one I see for this printer... Thanks again!

[celticmagic]

Alexander Zhirov (#alexanderzhirov), 2019-01-18 15:09:22 UTC

>>! In T83#142034, #Girtablulu wrote: > the only real Idea I have would journalctl I'm not aware of any special "printer log" another idea is start the gnome-control-center -v over terminal and see if anything gets displayed #Girtablulu I deleted printer. Opened through the gnome-control-center terminal and [added the printer](https://imgur.com/a/bL4fd4R) again. Here's what happened after adding. When I send a document to print - nothing happens in the terminal. ``` $ gnome-control-center -v ** (gnome-control-center:1264): DEBUG: 18:02:15.466: Enabling debugging (gnome-control-center:1264): printers-cc-panel-DEBUG: 18:02:21.952: Could not check 'Clean' maintenance command: Operation was cancelled (gnome-control-center:1264): printers-cc-panel-WARNING **: 18:02:40.888: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.PackageKit was not provided by any .service files (gnome-control-center:1264): printers-cc-panel-DEBUG: 18:02:40.946: Could not check 'Clean' maintenance command: Operation was cancelled (gnome-control-center:1264): printers-cc-panel-DEBUG: 18:02:40.999: Could not check 'Clean' maintenance command: Operation was cancelled (gnome-control-center:1264): printers-cc-panel-DEBUG: 18:02:41.000: Could not check 'Clean' maintenance command: Operation was cancelled (gnome-control-center:1264): GLib-CRITICAL **: 18:05:04.843: Source ID 1166 was not found when attempting to remove it ``` >>! In T83#142035, #Girtablulu wrote: > can you try installing brscan4? brscan4 installed

[celticmagic]

FvG (#Girtablulu), 2019-01-18 15:26:44 UTC

#SuperJC710e great at least it's printing, did you try as well as in increasing the dpi to 600 and did you check inside the printer settings if everything is set? Because you are the first who is reporting such an issue and as by far I can see and the package should work as all the others :/ #alexanderzhirov thanks for the checking, still looking into it, can you see your printer via `lsusb` ?

[celticmagic]

FvG (#Girtablulu), 2019-01-18 15:40:23 UTC

#alexanderzhirov let's try this, did a small change if this doesn't work I need to go back to the drawing board :/ https://drive.google.com/open?id=1PzWDhDO_fn2R-EgGNQEwBPkSARlXZaJB

[celticmagic]

Alexander Zhirov (#alexanderzhirov), 2019-01-18 15:55:19 UTC

>>! In T83#142120, #Girtablulu wrote: > #alexanderzhirov let's try this, did a small change if this doesn't work I need to go back to the drawing board :/ > > https://drive.google.com/open?id=1PzWDhDO_fn2R-EgGNQEwBPkSARlXZaJB #Girtablulu Nothing has changed... When sending to print, both messages appear at once. Like he doesn't even have time to think anymore. [Just started and immediately stopped.](https://i.imgur.com/ifjKuhi.png)

[celticmagic]

FvG (#Girtablulu), 2019-01-18 16:00:25 UTC

is your printer connected over usb or lan? if over usb, do you see your printer via lsusb?

[celticmagic]

Alexander Zhirov (#alexanderzhirov), 2019-01-18 16:01:41 UTC

>>! In T83#142124, #Girtablulu wrote: > is your printer connected over usb or lan? if over usb, do you see your printer via lsusb? ``` $ lsusb Bus 001 Device 002: ID 04f9:0273 Brother Industries, Ltd DCP-7057 scanner/printer ```

[celticmagic]

FvG (#Girtablulu), 2019-01-18 16:15:31 UTC

>>! In T83#142125, #alexanderzhirov wrote: > ``` > $ lsusb > Bus 001 Device 002: ID 04f9:0273 Brother Industries, Ltd DCP-7057 scanner/printer > ``` Please run sudo chmod 755 /usr/local/Brother/Printer/DCP7057/cupswrapper/brlpdwrapperDCP7057

[celticmagic]

Alexander Zhirov (#alexanderzhirov), 2019-01-18 16:18:05 UTC

>>! In T83#142126, #Girtablulu wrote: > > > >>>! In T83#142125, #alexanderzhirov wrote: > >> ``` >> $ lsusb >> Bus 001 Device 002: ID 04f9:0273 Brother Industries, Ltd DCP-7057 scanner/printer >> ``` > > Please run sudo chmod 755 /usr/local/Brother/Printer/DCP7057/cupswrapper/brlpdwrapperDCP7057 Yes, I did! Now the printer has printed my document!:)

[celticmagic]

FvG (#Girtablulu), 2019-01-18 16:19:28 UTC

.... I knew somewhere a permission was missing.. well at least it's solved, thx for your patience and help troubleshoot it :D

[celticmagic]

Alexander Zhirov (#alexanderzhirov), 2019-01-18 16:22:05 UTC

#Girtablulu Thank you too!;) Am I allowed to continue using this package now, or will you make a new package with permissions?