Enpal - Home Assistant integration (WiP)

Disclaimer

This integration is created with acknowledgement and limited support from Enpal GmbH, but it's not official software from Enpal.
It's a custom integration created entirely by me (gickowtf) and Skipperro, and thus Enapl GmbH is not responsible for any damage/issues caused by this integration, nor it offers any end-user support for it.

It is still a work in progress and is not guaranteed to work 100% or even work at all.

Features

• Inverter measurements:
  • Solar Production Power
  • Power House Total
  • Power External Total'
  • Energy Consumption
  • Production Day
  • Inverter temperature.
  • Energy External Out Day
  • Energy External In Day
  • Voltage, Current, Power Phase A, B and C
• Battery estimation:
  • Battery Power
  • Battery Percent
  • Battery Charge Day
  • Battery Discharge Day
  • Battery Charge Total
  • Battery Disharge Total
• WallBox:
  • Wallbox Charge Percent
  • Wallbox Charging Power
  • Wallbox Charging Total

Installation

1. Install this integration with HACS (adding repository required), or copy the contents of this repository into the custom_components/enpal directory.
2. Restart Home Assistant.
3. Start the configuration flow:
   • 
   • Or: Go to Configuration -> Integrations and click the + Add Integration. Select Enpal from the list.
   • If the integration is not found try to refresh the HA page without using cache (Ctrl+F5).
4. Input the IP, Port and access token for access InfluxDB server of your Enpal solar installation.

How to get access token?

Look at the Solar Rel Web Interface on your Local Network under Config!

or you can contact Enpal support.

Credits

• Skipperro: Creating the integration for Home Assistant.
• gickowtf: Creating the integrartion for Home Assistant with the new Enpal Solar Rel Web Interface