The PixhawkPlanner package is designed
for uav autonomous mission planning. In the first place it is a simple and open source planning tool for monitoring flights of low budget drones based on R
. It provide an easy workflow for planning autonomous
surveys including battery-dependent task splitting, save departures, and approaches of each monitoring chunks. It belongs to the uavR
package family that provides more functionality for the pre- and post-processing as well as the analysis of the derived data.
Up to now the PixhawkPlanner
package has been dedicated to low budget rtf-UAVs (ready-to-fly) as the DJI Phantom series and Pixhawk based platforms as the 3DR Solo. However the future support will focus the Pixhawk based UAVs.
The majority of the open UAV community is using the PixHawk autopilot unit and for planning probably the MissionPlanner ground station software. Both are well documented and provide APIs (Application program interface) and easy to use GUIs (graphical user interface). Nevertheless it is has only a poor planning support for terrain following autonomous flights and no support for battery-dependent task splitting and save departures and approaches (MissionPlanner). Other ground station software solutions like the powerful UgCS is supporting custom DEM/DSM (in the commercial Pro license) but are still lacking an adequate capability for dealing with highly complex surfaces combined with low above surface flight altitudes and also does not provide task splitting according to the battery capacity.
The uavRmd
bridges this gap and generates MAVLINK
format compliant mission files that can be uploaded to the Pixhawk controller using an integrated function or externally by any Ground Control Station software.
The core planning tool makeFP
(make flight plan) creates either intermediate flight control files for the dji phantom x UAVs or ready to upload control files for the 3DR Solo. The dji control files are designed for using with the proprietary Litchi flight control app exchange format, while the 3DR Solo files are using the MAVLINK
common message format, that is used by the PixHawk flight controller family.
The package family will consist of 2 parts:
PixhawkPlanner
uavRst
The easiest way to obtain a fairly good runtime enviroment is to setup Linux as a dual boot system or in a VB. If interested in setting up a clean Xubuntu or Mint Linux you can use the postinstall script for installing most of the stuff. For using some of the the Solo related functions you need to install the dronekit python libs in addition.
A full list of necessary libraries and binaries beyond R
will soon be provided.
To install the most actual version do it from github
you need to have installed the devtools
package.
devtools::install_github("gisma/PixhawkPlanner", ref = "master")