This role is used in Kubernetes the not so hard way with Ansible - Control plane. It installs the Kubernetes API server, scheduler and controller manager. For more information about this role please have a look at Kubernetes the not so hard way with Ansible - Control plane.
I tag every release and try to stay with semantic versioning. If you want to use the role I recommend to checkout the latest tag. The master branch is basically development while the tags mark stable releases. But in general I try to keep master in good shape too. A tag 25.0.0+1.30.5 means this is release 25.0.0 of this role and it's meant to be used with Kubernetes version 1.30.5 (but should work with any K8s 1.30.x release of course). If the role itself changes X.Y.Z before + will increase. If the Kubernetes version changes X.Y.Z after + will increase too. This allows to tag bugfixes and new major versions of the role while it's still developed for a specific Kubernetes release. That's especially useful for Kubernetes major releases with breaking changes.
This role requires that you already created some certificates for Kubernetes API server (see Kubernetes the not so hard way with Ansible - Certificate authority (CA)). The role copies the certificates from k8s_ctl_ca_conf_directory (which is by default the same as k8s_ca_conf_directory used by githubixx.kubernetes_ca role) to the destination host.
Your hosts on which you want to install Kubernetes should be able to communicate with each other of course. To add an additional layer of security you can setup a fully meshed VPN with WireGuard e.g. (see Kubernetes the not so hard way with Ansible - WireGuard). This encrypts every communication between the Kubernetes nodes if the Kubernetes processes use the WireGuard interface. Using WireGuard actually makes it also easily possible to have a Kubernetes cluster that is distributed in various data centers e.g.
And of course an etcd cluster (see Kubernetes the not so hard way with Ansible - etcd cluster) to store the state of the Kubernetes cluster.
Change history:
See full CHANGELOG.md
IMPORTANT: If you upgrade from a release < 22.0.0+1.27.8 please read the CHANGELOG.md carefully! Version 22.0.0+1.27.8 had quite a few breaking changes!
Recent changes:
k8s_ctl_release to 1.30.5k8s_ctl_release to 1.29.9k8s_ctl_release to 1.29.4k8s_ctl_release to 1.29.3alvistack instead of generic Vagrant boxesDirectly download from Github (Change into Ansible roles directory before cloning. You can figure out the role path by using ansible-config dump | grep DEFAULT_ROLES_PATH command):
git clone https://github.com/githubixx/ansible-role-kubernetes-controller.git githubixx.kubernetes_controller
Via ansible-galaxy command and download directly from Ansible Galaxy:
ansible-galaxy install role githubixx.kubernetes_controller
Create a requirements.yml file with the following content (this will download the role from Github) and install with
ansible-galaxy role install -r requirements.yml (change version if needed):
---
roles:
- name: githubixx.kubernetes_controller
src: https://github.com/githubixx/ansible-role-kubernetes-controller.git
version: 25.0.0+1.30.5# The base directory for Kubernetes configuration and certificate files for
# everything control plane related. After the playbook is done this directory
# contains various sub-folders.
k8s_ctl_conf_dir: "/etc/kubernetes/controller"
# All certificate files (Private Key Infrastructure related) specified in
# "k8s_ctl_certificates" and "k8s_ctl_etcd_certificates" (see "vars/main.yml")
# will be stored here. Owner of this new directory will be "root". Group will
# be the group specified in "k8s_run_as_group"`. The files in this directory
# will be owned by "root" and group as specified in "k8s_run_as_group"`. File
# permissions will be "0640".
k8s_ctl_pki_dir: "{{ k8s_ctl_conf_dir }}/pki"
# The directory to store the Kubernetes binaries (see "k8s_ctl_binaries"
# variable in "vars/main.yml"). Owner and group of this new directory
# will be "root" in both cases. Permissions for this directory will be "0755".
#
# NOTE: The default directory "/usr/local/bin" normally already exists on every
# Linux installation with the owner, group and permissions mentioned above. If
# your current settings are different consider a different directory. But make sure
# that the new directory is included in your "$PATH" variable value.
k8s_ctl_bin_dir: "/usr/local/bin"
# The Kubernetes release.
k8s_ctl_release: "1.30.5"
# The interface on which the Kubernetes services should listen on. As all cluster
# communication should use a VPN interface the interface name is
# normally "wg0" (WireGuard),"peervpn0" (PeerVPN) or "tap0".
#
# The network interface on which the Kubernetes control plane services should
# listen on. That is:
#
# - kube-apiserver
# - kube-scheduler
# - kube-controller-manager
#
k8s_interface: "eth0"
# Run Kubernetes control plane service (kube-apiserver, kube-scheduler,
# kube-controller-manager) as this user.
#
# If you want to use a "secure-port" < 1024 for "kube-apiserver" you most
# probably need to run "kube-apiserver" as user "root" (not recommended).
#
# If the user specified in "k8s_run_as_user" does not exist then the role
# will create it. Only if the user already exists the role will not create it
# but it will adjust it's UID/GID and shell if specified (see settings below).
# So make sure that UID, GID and shell matches the existing user if you don't
# want that that user will be changed.
#
# Additionally if "k8s_run_as_user" is "root" then this role wont touch the user
# at all.
k8s_run_as_user: "k8s"
# UID of user specified in "k8s_run_as_user". If not specified the next available
# UID from "/etc/login.defs" will be taken (see "SYS_UID_MAX" setting in that file).
# k8s_run_as_user_uid: "999"
# Shell for specified user in "k8s_run_as_user". For increased security keep
# the default.
k8s_run_as_user_shell: "/bin/false"
# Specifies if the user specified in "k8s_run_as_user" will be a system user (default)
# or not. If "true" the "k8s_run_as_user_home" setting will be ignored. In general
# it makes sense to keep the default as there should be no need to login as
# the user that runs kube-apiserver, kube-scheduler or kube-controller-manager.
k8s_run_as_user_system: true
# Home directory of user specified in "k8s_run_as_user". Will be ignored if
# "k8s_run_as_user_system" is set to "true". In this case no home directory will
# be created. Normally not needed.
# k8s_run_as_user_home: "/home/k8s"
# Run Kubernetes daemons (kube-apiserver, kube-scheduler, kube-controller-manager)
# as this group.
#
# Note: If the group specified in "k8s_run_as_group" does not exist then the role
# will create it. Only if the group already exists the role will not create it
# but will adjust GID if specified in "k8s_run_as_group_gid" (see setting below).
k8s_run_as_group: "k8s"
# GID of group specified in "k8s_run_as_group". If not specified the next available
# GID from "/etc/login.defs" will be take (see "SYS_GID_MAX" setting in that file).
# k8s_run_as_group_gid: "999"
# Specifies if the group specified in "k8s_run_as_group" will be a system group (default)
# or not.
k8s_run_as_group_system: true
# By default all tasks that needs to communicate with the Kubernetes
# cluster are executed on local host (127.0.0.1). But if that one
# doesn't have direct connection to the K8s cluster or should be executed
# elsewhere this variable can be changed accordingly.
k8s_ctl_delegate_to: "127.0.0.1"
# The IP address or hostname of the Kubernetes API endpoint. This variable
# is used by "kube-scheduler" and "kube-controller-manager" to connect
# to the "kube-apiserver" (Kubernetes API server).
#
# By default the first host in the Ansible group "k8s_controller" is
# specified here. NOTE: This setting is not fault tolerant! That means
# if the first host in the Ansible group "k8s_controller" is down
# the worker node and its workload continue working but the worker
# node doesn't receive any updates from Kubernetes API server.
#
# If you have a loadbalancer that distributes traffic between all
# Kubernetes API servers it should be specified here (either its IP
# address or the DNS name). But you need to make sure that the IP
# address or the DNS name you want to use here is included in the
# Kubernetes API server TLS certificate (see "k8s_apiserver_cert_hosts"
# variable of https://github.com/githubixx/ansible-role-kubernetes-ca
# role). If it's not specified you'll get certificate errors in the
# logs of the services mentioned above.
k8s_ctl_api_endpoint_host: "{% set controller_host = groups['k8s_controller'][0] %}{{ hostvars[controller_host]['ansible_' + hostvars[controller_host]['k8s_interface']].ipv4.address }}"
# As above just for the port. It specifies on which port the
# Kubernetes API servers are listening. Again if there is a loadbalancer
# in place that distributes the requests to the Kubernetes API servers
# put the port of the loadbalancer here.
k8s_ctl_api_endpoint_port: "6443"
# Normally "kube-apiserver", "kube-controller-manager" and "kube-scheduler" log
# to "journald". But there are exceptions like the audit log. For this kind of
# log files this directory will be used as a base path. The owner and group
# of this directory will be the one specified in "k8s_run_as_user" and "k8s_run_as_group"
# as these services run as this user and need permissions to create log files
# in this directory.
k8s_ctl_log_base_dir: "/var/log/kubernetes"
# Permissions for directory specified in "k8s_ctl_log_base_dir"
k8s_ctl_log_base_dir_mode: "0770"
# The port the control plane components should connect to etcd cluster
k8s_ctl_etcd_client_port: "2379"
# The interface the etcd cluster is listening on
k8s_ctl_etcd_interface: "eth0"
# The location of the directory where the Kubernetes certificates are stored.
# These certificates were generated by the "kubernetes_ca" Ansible role if you
# haven't used a different method to generate these certificates. So this
# directory is located on the Ansible controller host. That's normally the
# host where "ansible-playbook" gets executed. "k8s_ca_conf_directory" is used
# by the "kubernetes_ca" Ansible role to store the certificates. So it's
# assumed that this variable is already set.
k8s_ctl_ca_conf_directory: "{{ k8s_ca_conf_directory }}"
# Directory where "admin.kubeconfig" (the credentials file) for the "admin" user
# is stored. By default this directory (and it's "kubeconfig" file) will
# be stored on the host specified in "k8s_ctl_delegate_to". By default this
# is "127.0.0.1". So if you run "ansible-playbook" locally e.g. the directory
# and file will be created there.
#
# By default the value of this variable will expand to the user's local $HOME
# plus "/k8s/certs". That means if the user's $HOME directory is e.g.
# "/home/da_user" then "k8s_admin_conf_dir" will have a value of
# "/home/da_user/k8s/certs".
k8s_admin_conf_dir: "{{ '~/k8s/configs' | expanduser }}"
# Permissions for the directory specified in "k8s_admin_conf_dir"
k8s_admin_conf_dir_perm: "0700"
# Owner of the directory specified in "k8s_admin_conf_dir" and for
# "admin.kubeconfig" stored in this directory.
k8s_admin_conf_owner: "root"
# Group of the directory specified in "k8s_admin_conf_dir" and for
# "admin.kubeconfig" stored in this directory.
k8s_admin_conf_group: "root"
# Host where the "admin" user connects to administer the K8s cluster.
# This setting is written into "admin.kubeconfig". This allows to use
# a different host/loadbalancer as the K8s services which might use an internal
# loadbalancer while the "admin" user connects to a different host/loadbalancer
# that distributes traffic to the "kube-apiserver" e.g.
#
# Besides that basically the same comments as for "k8s_ctl_api_endpoint_host"
# variable apply.
k8s_admin_api_endpoint_host: "{% set controller_host = groups['k8s_controller'][0] %}{{ hostvars[controller_host]['ansible_' + hostvars[controller_host]['k8s_interface']].ipv4.address }}"
# As above just for the port.
k8s_admin_api_endpoint_port: "6443"
# Directory to store "kube-apiserver" audit logs (if enabled). The owner and
# group of this directory will be the one specified in "k8s_run_as_user"
# and "k8s_run_as_group".
k8s_apiserver_audit_log_dir: "{{ k8s_ctl_log_base_dir }}/kube-apiserver"
# The directory to store "kube-apiserver" configuration.
k8s_apiserver_conf_dir: "{{ k8s_ctl_conf_dir }}/kube-apiserver"
# "kube-apiserver" daemon settings (can be overridden or additional added by defining
# "k8s_apiserver_settings_user")
k8s_apiserver_settings:
"advertise-address": "{{ hostvars[inventory_hostname]['ansible_' + k8s_interface].ipv4.address }}"
"bind-address": "{{ hostvars[inventory_hostname]['ansible_' + k8s_interface].ipv4.address }}"
"secure-port": "6443"
"enable-admission-plugins": "NodeRestriction,NamespaceLifecycle,LimitRanger,ServiceAccount,TaintNodesByCondition,Priority,DefaultTolerationSeconds,DefaultStorageClass,PersistentVolumeClaimResize,MutatingAdmissionWebhook,ValidatingAdmissionWebhook,ResourceQuota,PodSecurity,Priority,StorageObjectInUseProtection,RuntimeClass,CertificateApproval,CertificateSigning,ClusterTrustBundleAttest,CertificateSubjectRestriction,DefaultIngressClass"
"allow-privileged": "true"
"authorization-mode": "Node,RBAC"
"audit-log-maxage": "30"
"audit-log-maxbackup": "3"
"audit-log-maxsize": "100"
"audit-log-path": "{{ k8s_apiserver_audit_log_dir }}/audit.log"
"event-ttl": "1h"
"kubelet-preferred-address-types": "InternalIP,Hostname,ExternalIP" # "--kubelet-preferred-address-types" defaults to:
# "Hostname,InternalDNS,InternalIP,ExternalDNS,ExternalIP"
# Needs to be changed to make "kubectl logs" and "kubectl exec" work.
"runtime-config": "api/all=true"
"service-cluster-ip-range": "10.32.0.0/16"
"service-node-port-range": "30000-32767"
"client-ca-file": "{{ k8s_ctl_pki_dir }}/ca-k8s-apiserver.pem"
"etcd-cafile": "{{ k8s_ctl_pki_dir }}/ca-etcd.pem"
"etcd-certfile": "{{ k8s_ctl_pki_dir }}/cert-k8s-apiserver-etcd.pem"
"etcd-keyfile": "{{ k8s_ctl_pki_dir }}/cert-k8s-apiserver-etcd-key.pem"
"encryption-provider-config": "{{ k8s_apiserver_conf_dir }}/encryption-config.yaml"
"encryption-provider-config-automatic-reload": "true"
"kubelet-certificate-authority": "{{ k8s_ctl_pki_dir }}/ca-k8s-apiserver.pem"
"kubelet-client-certificate": "{{ k8s_ctl_pki_dir }}/cert-k8s-apiserver.pem"
"kubelet-client-key": "{{ k8s_ctl_pki_dir }}/cert-k8s-apiserver-key.pem"
"service-account-key-file": "{{ k8s_ctl_pki_dir }}/cert-k8s-controller-manager-sa.pem"
"service-account-signing-key-file": "{{ k8s_ctl_pki_dir }}/cert-k8s-controller-manager-sa-key.pem"
"service-account-issuer": "https://{{ groups.k8s_controller | first }}:6443"
"tls-cert-file": "{{ k8s_ctl_pki_dir }}/cert-k8s-apiserver.pem"
"tls-private-key-file": "{{ k8s_ctl_pki_dir }}/cert-k8s-apiserver-key.pem"
# This is the content of "encryption-config.yaml". Used by "kube-apiserver"
# (see "encryption-provider-config" option in "k8s_apiserver_settings").
# "kube-apiserver" will use this configuration to encrypt data before storing
# it in etcd (encrypt data at-rest).
#
# The configuration below is a usable example but might not fit your needs.
# So please review carefully! E.g. you might want to replace "aescbc" provider
# with a different one like "secretbox". As you can see this configuration only
# encrypts "secrets" at-rest. But it's also possible to encrypt other K8s
# resources. NOTE: "identity" provider doesn't encrypt anything! That means
# plain text. In the configuration below it's used as fallback.
#
# If you keep the default defined below please make sure to specify the
# variable "k8s_encryption_config_key" somewhere (e.g. "group_vars/all.yml" or
# even better use "ansible-vault" to store these kind of secrets).
# This needs to be a base64 encoded value. To create such a value on Linux
# run the following command:
#
# head -c 32 /dev/urandom | base64
#
# For a detailed description please visit:
# https://kubernetes.io/docs/tasks/administer-cluster/encrypt-data/
#
# How to rotate the encryption key or to implement encryption at-rest in
# an existing K8s cluster please visit:
# https://kubernetes.io/docs/tasks/administer-cluster/encrypt-data/#rotating-a-decryption-key
k8s_apiserver_encryption_provider_config: |
---
kind: EncryptionConfiguration
apiVersion: apiserver.config.k8s.io/v1
resources:
- resources:
- secrets
providers:
- aescbc:
keys:
- name: key1
secret: {{ k8s_encryption_config_key }}
- identity: {}
# The directory to store controller manager configuration.
k8s_controller_manager_conf_dir: "{{ k8s_ctl_conf_dir }}/kube-controller-manager"
# K8s controller manager settings (can be overridden or additional added by defining
# "k8s_controller_manager_settings_user")
k8s_controller_manager_settings:
"bind-address": "{{ hostvars[inventory_hostname]['ansible_' + k8s_interface].ipv4.address }}"
"secure-port": "10257"
"cluster-cidr": "10.200.0.0/16"
"allocate-node-cidrs": "true"
"cluster-name": "kubernetes"
"authentication-kubeconfig": "{{ k8s_controller_manager_conf_dir }}/kubeconfig"
"authorization-kubeconfig": "{{ k8s_controller_manager_conf_dir }}/kubeconfig"
"kubeconfig": "{{ k8s_controller_manager_conf_dir }}/kubeconfig"
"leader-elect": "true"
"service-cluster-ip-range": "10.32.0.0/16"
"cluster-signing-cert-file": "{{ k8s_ctl_pki_dir }}/cert-k8s-apiserver.pem"
"cluster-signing-key-file": "{{ k8s_ctl_pki_dir }}/cert-k8s-apiserver-key.pem"
"root-ca-file": "{{ k8s_ctl_pki_dir }}/ca-k8s-apiserver.pem"
"requestheader-client-ca-file": "{{ k8s_ctl_pki_dir }}/ca-k8s-apiserver.pem"
"service-account-private-key-file": "{{ k8s_ctl_pki_dir }}/cert-k8s-controller-manager-sa-key.pem"
"use-service-account-credentials": "true"
# The directory to store scheduler configuration.
k8s_scheduler_conf_dir: "{{ k8s_ctl_conf_dir }}/kube-scheduler"
# kube-scheduler settings
k8s_scheduler_settings:
"bind-address": "{{ hostvars[inventory_hostname]['ansible_' + k8s_interface].ipv4.address }}"
"config": "{{ k8s_scheduler_conf_dir }}/kube-scheduler.yaml"
"authentication-kubeconfig": "{{ k8s_scheduler_conf_dir }}/kubeconfig"
"authorization-kubeconfig": "{{ k8s_scheduler_conf_dir }}/kubeconfig"
"requestheader-client-ca-file": "{{ k8s_ctl_pki_dir }}/ca-k8s-apiserver.pem"
# These sandbox security/sandbox related settings will be used for
# "kube-apiserver", "kube-scheduler" and "kube-controller-manager"
# systemd units. These options will be placed in the "[Service]" section.
# The default settings should be just fine for increased security of the
# mentioned services. So it makes sense to keep them if possible.
#
# For more information see:
# https://www.freedesktop.org/software/systemd/man/systemd.service.html#Options
#
# The options below "RestartSec=5" are mostly security/sandbox related settings
# and limit the exposure of the system towards the unit's processes. You can add
# or remove options as needed of course. For more information see:
# https://www.freedesktop.org/software/systemd/man/systemd.exec.html
k8s_ctl_service_options:
- User={{ k8s_run_as_user }}
- Group={{ k8s_run_as_group }}
- Restart=on-failure
- RestartSec=5
- NoNewPrivileges=true
- ProtectHome=true
- PrivateTmp=true
- PrivateUsers=true
- ProtectSystem=full
- ProtectClock=true
- ProtectKernelModules=true
- ProtectKernelTunables=true
- ProtectKernelLogs=true
- ProtectControlGroups=true
- ProtectHostname=true
- ProtectControlGroups=true
- RestrictNamespaces=true
- RestrictRealtime=true
- RestrictSUIDSGID=true
- CapabilityBoundingSet=~CAP_SYS_PTRACE
- CapabilityBoundingSet=~CAP_KILL
- CapabilityBoundingSet=~CAP_MKNOD
- CapabilityBoundingSet=~CAP_SYS_CHROOT
- CapabilityBoundingSet=~CAP_SYS_ADMIN
- CapabilityBoundingSet=~CAP_SETUID
- CapabilityBoundingSet=~CAP_SETGID
- CapabilityBoundingSet=~CAP_SETPCAP
- CapabilityBoundingSet=~CAP_CHOWN
- SystemCallFilter=@system-service
- ReadWritePaths=-/usr/libexec/kubernetesThe kube-apiserver settings defined in k8s_apiserver_settings can be overridden by defining a variable called k8s_apiserver_settings_user. You can also add additional settings by using this variable. E.g. to override audit-log-maxage and audit-log-maxbackup default values and add watch-cache add the following settings to group_vars/k8s.yml:
k8s_apiserver_settings_user:
"audit-log-maxage": "40"
"audit-log-maxbackup": "4"
"watch-cache": "false"The same is true for the kube-controller-manager by adding entries to k8s_controller_manager_settings_user variable. For kube-scheduler add entries to k8s_scheduler_settings_user variable to override/add settings in k8s_scheduler_settings dictionary.
- hosts: k8s_controller
roles:
- githubixx.kubernetes_controllerThis role has a small test setup that is created using Molecule, libvirt (vagrant-libvirt) and QEMU/KVM. Please see my blog post Testing Ansible roles with Molecule, libvirt (vagrant-libvirt) and QEMU/KVM how to setup. The test configuration is here.
Afterwards Molecule can be executed:
molecule convergeThis will setup a few virtual machines (VM) with supported Ubuntu OS and installs an Kubernetes cluster but without the worker nodes (so no nodes with kube-proxy and kubelet installed). A small verification step is also included:
molecule verifyTo clean up run
molecule destroyGNU GENERAL PUBLIC LICENSE Version 3