Athom Homey support for for Mill WiFi heaters.
All Mill WiFi heaters should in theory be supported. The following devices has been tested by the community and reported working:
The module supports all normal thermostat triggers, conditions and actions, but also has a few in addition.
Supported triggers:
Supported conditions:
Supported actions:
Open Settings and enter you Mill credentials before trying to add any Mill heaters.
The default power consumption is set to 1200W, please adjust this to match you model in the device advanced settings.
The Mill service has three modes, Comfort, Sleep and Away. (There's also a Holiday mode exposed in the API, but not supported in the Mill UI yet).
When you change the mode, the temperature will change to that mode's temperature set point. Adjusting the temperature changes the set point for that mode.
If you select the mode Program, the Mill service will take control and adjust the mode during the day according to the program you set up on the Mill app. The device will then change to the current thermostat mode.
This app is using sentry.io to log exceptions and errors. By installing this app, you accept that the app may send error logs to Sentry. No personal or device information, like email, passwords, Homey identification etc., is ever sent, only logs regarding the error if that occurred. The logs includes exception messages, parts of source code, line numbers, app version etc.
Use this app at your own risk. The app has been developed with the same APIs and interfaces used by the official Mill app, but there is a chance that the API calls can have unexpected consequences for which nobody but you are responsible.
Heat by Stan Diers from the Noun Project