search

gnodipac886 / MatebookXPro-hackintosh

Hackintosh Solution for the Huawei Matebook X Pro
https://www.tonymacx86.com/threads/guide-matebook-x-pro-2018-using-hotpatch-vituralsmc-10-14-x.278730/
257 stars 57 forks source link

Installer doesn't finish booting #76

Closed oliolioli666 closed 4 years ago

oliolioli666 commented 4 years ago

Hi everyone,

I created the USB, copied die USB-EFI (tried the Clover-file too, and the "makeinstall-only-clover" etc.), but it always stays the same: I choose the USB-Clover-Boot, the apple appears, the bar moves until nearly the end and then a black screen and then the matebook boots into the other OS (Windows or Linux).

I even tried deleting the main disk as to force some MacOS further booting, but nothing helps. I want this stupid Catalina to run... Redid it all today, formating the stick, freshly installing Windows, nothing helped. Any thoughts?

Best, Oliver

kvn1351 commented 4 years ago

Did you create your macOS install usb with windows? Try creating one from createinstallmedia from a real mac. A friend of mine had this issue.

oliolioli666 commented 4 years ago

Windows. I have no Mac available. But isn't that whole gibMacOS meant for creating the usb under Windows? So it runs perfectly fine for the majority expect for your friend and me? :)

Thanks for the fast reply. Seems like I will be stuck with Windows or Linux then. Good night

kvn1351 commented 4 years ago

Windows. I have no Mac available. But isn't that whole gibMacOS meant for creating the usb under Windows? So it runs perfectly fine for the majority expect for your friend and me? :)

Thanks for the fast reply. Seems like I will be stuck with Windows or Linux then. Good night

Well, his problem was that the partition wasn't correctly formated by the script. I don't know the specifics. On Windows you may check if TransMac can see the partition and files.

Also, he simply grabbed an already prepared macOS vmware vm and did it from there. Then it worked perfectly.

With fast internet and googlefu it's a matter of 2h of work tops.

Tip: you need to patch vmware with a script to allow for macos

oliolioli666 commented 4 years ago

Thank you! I'll try. Cheers

seanfarr788 commented 4 years ago

Thank you! I'll try. Cheers

Were you able to solved this issue?

oliolioli666 commented 4 years ago

Not at the moment. I was juggling a little with the virtual machine stuff, but I decided to stay on Windows. Energy management is ok, but the speakers are only stereo now... I'm a noob, ;).

Stay healthy, all the best

Roshaanv commented 4 years ago

@oliolioli666 I had a similar problem. Try this #100.

oliolioli666 commented 4 years ago

It's not crashing, it's just not installing. I will try doing it with MacOS whenever I get my hands in a Mac again. For now I am just gonna enjoy spring... Thank you anyways. All the best