ESP Alarm Panel Module

The code using the dscKeybusInterface library that runs on a D1 Mini for my DSC Alarm Panel. It's combo of the VirtualKeypad-Web & HomeAssistant-MQTT examples, altered for my needs.

Build & Upload to D1 Mini

This project uses PlatformIO, I use the PlatformIO IDE extension in VSCode - the build and upload buttons are super convenient, but I've not found how to upload the website data so run platformio run --target uploadfs in the PlatformIO Terminal to upload the website to the D1 Mini.

Before you can build you'll need copy the secrets.h.example to secrets.h and set the values for your network and panel.

HomeAssistant example alarm config:

alarm_control_panel:
  - platform: mqtt
    name: "Security System"
    state_topic: "dsc/Get/Partition1"
    availability_topic: "dsc/Status"
    command_topic: "dsc/Set"
    code: "1234"
    code_arm_required: true
    payload_disarm: "1D"
    payload_arm_home: "1S"
    payload_arm_away: "1A"

binary_sensor:
  - platform: mqtt
    name: "Security Trouble"
    state_topic: "dsc/Get/Trouble"
    device_class: "problem"
    payload_on: "1"
    payload_off: "0"
  - platform: mqtt
    name: "Back door"
    state_topic: "dsc/Get/Zone1"
    device_class: "door"
    payload_on: "1"
    payload_off: "0"
  - platform: mqtt
    name: "Dining Room"
    state_topic: "dsc/Get/Zone2"
    device_class: "motion"
    payload_on: "1"
    payload_off: "0"
  - platform: mqtt
    name: "Lounge"
    state_topic: "dsc/Get/Zone3"
    device_class: "motion"
    payload_on: "1"
    payload_off: "0"
  - platform: mqtt
    name: "Front door"
    state_topic: "dsc/Get/Zone4"
    device_class: "door"
    payload_on: "1"
    payload_off: "0"
  - platform: mqtt
    name: "Main bedroom"
    state_topic: "dsc/Get/Zone5"
    device_class: "motion"
    payload_on: "1"
    payload_off: "0"
  - platform: mqtt
    name: "Passage"
    state_topic: "dsc/Get/Zone6"
    device_class: "motion"
    payload_on: "1"
    payload_off: "0"
  - platform: mqtt
    name: "Garage"
    state_topic: "dsc/Get/Zone7"
    device_class: "motion"
    payload_on: "1"
    payload_off: "0"

More details found at MQTT Alarm Control Panel on HomeAssistants website.