20_casino_royale

Prerequisites

• OpenCV (installation instructions)
• ZBar (installation instructions)
• WiringPi (installation instructions)
  • Only required if utilizing a piezzo buzzer/speaker when scanning QR codes
  • Make sure you're using the correct version for your RPi (requires 2.52 for RPi 4)
• LibCurl Dev (sudo apt-get install libcurl4-openssl-dev)

Operation Instructions

1. Edit the following line within the main function in casino-royale.cpp: char HandRanksLoc[] = "/home/pi/20_casino_royale/TwoPlusTwoHandEvaluator/HandRanks.dat";
   • Simply substitute the section "/home/pi/" section with the directory the repo is stored in (starting from root)
2. Run the Makefile in the root of the repository ("make" on command-line)
   • HandRanks.dat isn't tracked as it is >100MB
   • A 2011 i7 Macbook Pro takes ~30s to generate the table
   • A Raspberry Pi 4 takes ~100s to generate teh table

Credits

TwoPlusTwoEvaluator: Allowed for the odds calculations to be possible