# SanicDNS ##### Gotta go fast 

What does it do?

SanicDNS is a tool that can resolve DNS requests blazingly fast, with the correct hardware and correct resolvers you can resolve up to 5.000.000 domain names each second. You provide a list with input domains and a list with resolvers, SanicDNS will take care of resolving these domains against the provided resolvers in the fastest way possible.

What does it not do?

SanicDNS will not (yet):

• Perform wildcard detection
• Do recursive resolving, you'll need external resolvers

How does it work?

Good question. For more specific details see the getting started and technical overview pages in the docs.

What do I need?

To use SanicDNS you'll need:

• A Linux machine with x86_64 architecture
• At least 2 logical cores
• Kernel version >= 5.11
• Performant DNS resolvers
• A good internet connection

Installing

This section provides instructions for installing precompiled AF_XDP binaries to get started quickly.

curl -sSL https://raw.githubusercontent.com/hadriansecurity/sanicdns/main/install.sh | sudo bash

For compiling from source see the docs.

Getting started

1. Setup 1Gb of hugepages (Allocate more when out of memory)

   sudo dpdk-hugepages.py --setup 1G

2. Get a wordlist to use For getting started you can use the majestic_million.txt file in the SanicDNS Repo

   wget https://raw.githubusercontent.com/hadriansecurity/sanicdns/main/majestic_million.txt

3. Run the tool

   sudo sanicdns -i majestic_million.txt -l log.txt -r 2000 -c 10000 --resolvers 1.1.1.1,1.0.0.1 -o out.txt

Common use cases

Resolving all AAAA records with the resolvers specified in resolvers.txt and a timeout of 3s:

sudo sanicdns -i majestic_million.txt -l log.txt -r 10000 -c 10000 --resolvers resolvers.txt -t 3000 -q T_AAAA

Subdomain bruteforcing test.com, 15 retries:

sudo sanicdns -i subdomains.txt --postfix .test.com -r 2000 -c 10000 --resolvers resolvers.txt -o out.txt --num-retries 15

Command line flags

  -h, --help            print this help screen
      --version         print the version and exit
      --headless        run in headless mode (no terminal UI)
  -w, --cores           number of cores to use (default: 2)
  -r, --rate            scan rate in [packets per second] (default: 1000)
  -c, --num-concurrent  max number of concurrent DNS requests
                           (default: rate/5)
  -t, --timeout         timeout [ms] (default: 15'000)
      --num-retries     number of retries (default: 10)
  -g, --gateway-ip      IP address of gateway
  -s, --static-ip       own (static) IP address
  -m, --gateway-mac     gateway mac, ARP will be used if no MAC is specified
  -d, --device-name     Device name (example: 0000:2e:00:0)
  -i, --input-file      Path of input file with domains
  -x, --xdp-path        Path to XDP program
      --resolvers       Resolvers (default 1.1.1.1,1.0.0.1), either:
                            1. Comma-seperated list of IP's
                            2. File with a resolver specified on each line
      --rcodes          Only output results with these DNS return codes
                             Example: --rcodes R_NOERROR,R_SERVFAIL
      --prefix          Prefix to add to each line of the input
      --postfix         Postfix to add to each line of the input
  -l, --log-path        Log file path, logging will be enabled when a log path 
                          is set
  -o, --output-path     output path (default: output.txt)
      --output-raw      output raw DNS packets in hex (from DNS header to end 
                          of packet)
      --no-huge         Don't use huge pages
      --debug           Print debug information
  -q, --q-type          Question type
                          (T_A, T_NS, T_CNAME, T_DNAME, T_SOA, T_PTR, T_MX, T_-
                          TXT, T_AAAA, T_OPT)