padavan-4.4

This project is based on original rt-n56u with latest mtk 4.4.198 kernel, which is fetch from D-LINK GPL code.

• Features

  • Based on 4.4.198 Linux kernel
  • Support MT7621 based devices
  • Support MT7615D/MT7615N/MT7915D wireless chips
  • Support raeth and mt7621 hwnat with legency driver
  • Support qca shortcut-fe
  • Support IPv6 NAT based on netfilter
  • Support WireGuard integrated in kernel
  • Support fullcone NAT (by Chion82)
  • Support LED&GPIO control via sysfs

• WIP

  • 802.11kvr and mtkiappd roam functions
  • IPTV related functions

• Supported devices

  • CR660x
  • JCG-Q20
  • JCG-AC860M
  • JCG-836PRO
  • JCG-Y2
  • DIR-878
  • DIR-882
  • K2P
  • K2P-USB
  • NETGEAR-BZV
  • MR2600
  • MI-R3P
  • XY-C1

• Compilation step

  • Install dependencies

    
    # Debian/Ubuntu
    sudo apt install unzip libtool-bin curl cmake gperf gawk flex bison nano xxd \
    fakeroot kmod cpio git python3-docutils gettext automake autopoint \
    texinfo build-essential help2man pkg-config zlib1g-dev libgmp3-dev \
    libmpc-dev libmpfr-dev libncurses5-dev libltdl-dev wget libc-dev-bin

  Archlinux/Manjaro

  sudo pacman -Syu --needed git base-devel cmake gperf ncurses libmpc \ gmp python-docutils vim rpcsvc-proto fakeroot cpio help2man

  Alpine

  sudo apk add make gcc g++ cpio curl wget nano xxd kmod \ pkgconfig rpcgen fakeroot ncurses bash patch \ bsd-compat-headers python2 python3 zlib-dev \ automake gettext gettext-dev autoconf bison \ flex coreutils cmake git libtool gawk sudo

  - Clone source code
  ```sh
  git clone https://github.com/hanwckf/padavan-4.4.git

  • Prepare toolchain

    
    cd padavan-4.4/toolchain-mipsel

  (Recommend) Download prebuilt toolchain for x86_64 or aarch64 host

  ./dl_toolchain.sh

  or build toolchain with crosstool-ng

  ./build_toolchain

  - Modify template file and start compiling
  ```sh
  cd padavan-4.4/trunk
  
  # (Optional) Modify template file
  # nano configs/templates/K2P.config
  
  # Start compiling
  fakeroot ./build_firmware_modify K2P
  
  # To build firmware for other devices, clean the tree after previous build
  ./clear_tree

• Manuals

  • Controlling GPIO and LEDs via sysfs
  • How to use NAND RWFS partition
  • How to use IPv6 NAT and fullcone NAT
  • How to add new device support with device tree