search

helgeerbe / OpenDTU-OnBattery

Software for ESP32 to talk to Hoymiles Inverters and Victrons MPPT battery chargers (Ve.Direct)
GNU General Public License v2.0
253 stars 56 forks source link

Hoymiles HM800 Blinkt abwechselnd rot und grün im ungefähr 5 sec takt #1038

Closed Solar-Newbie closed 3 weeks ago

Solar-Newbie commented 3 weeks ago

What happened?

heute 07.06.2024 konnte ich ein mir unbekanntes Phänomen beobachten. Seit ca 19:00 blinkt der WR abwechselnd Rot und grün im 5-10 Sek-Takt( seitdem habe ich es bemerkt). Alle Komponenten ausgeschaltet, neu gestartet, brachte keine Abhilfe. Erst als ich die Version 07.05.2024 wieder eingespielt habe, lief der WR wieder durchgehend im grünen Modus. Leider habe ich mir nicht die Fehlerprotolle der Konsole mitgeschnitten. Aufbau: 2x 430 Wp in Reihe an Victron 100/20, Pylontech us2000c , Opendtu mit ESP32 (kein S3 od. wertiger) . Sollte unter dieser Konstellation gewünscht sein , den Fehler zu reproduzieren, werde ich es zeitnah erledigen. mfg

To Reproduce Bug

Keine Ahnung

Expected Behavior

Kenntnisnahme, Beobachtung

Install Method

Pre-Compiled binary from GitHub

What git-hash/version of OpenDTU?

03.06.2024, generic_esp32, kONFIGURATIONSVERSION 0.1.28

Relevant log/trace output

nicht mitgeschnitten

Anything else?

No response

Solar-Newbie commented 3 weeks ago

ESP32-D0WD-V3 wird als Chip-Model angezeigt

spcqike commented 3 weeks ago

Ich denke nicht, dass es ein openDTU Problem ist. Was sollte die DTU machen?

Laut Handbuch ist das abwechselnd grüne und rote blinken ein „Firmware Problem“

image

Vielleicht hat sich der wechselrichter irgendwie aufgegangen und einen Zustand erreicht, aus dem er von allein nicht heraus kam. Und dein kompletter Neustart mit allem drum und dran hat es halt gelöst.

Solar-Newbie commented 3 weeks ago

Problem taucht nun auch unter der älteren Version auf. Hier ein Auszug der Meldungen von der Konsole. Websocket: [/livedata][4] disconnect 20:06:29.180 > Websocket: [/vedirectlivedata][4] disconnect 20:06:29.246 > Websocket: [/batterylivedata][4] disconnect 20:06:30.154 > [Pylontech] Alarms: 0 0 0 0 0 0 020:06:30.249 > [Pylontech] Warnings: 0 0 0 0 0 0 020:06:30.351 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:06:30.401 > [Pylontech] soc: 72 soh: 10020:06:30.547 > [Pylontech] voltage: 49.500000 current: -6.100000 temperature: 24.00000020:06:30.610 > [Pylontech] chargeStatusBits: 1 1 020:06:30.674 > [Pylontech] Manufacturer: PYLON 20:06:32.121 > [Pylontech] Alarms: 0 0 0 0 0 0 020:06:32.506 > [Pylontech] Warnings: 0 0 0 0 0 0 020:06:32.569 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:06:32.641 > [Pylontech] soc: 72 soh: 10020:06:32.694 > [Pylontech] voltage: 49.450001 current: -7.400000 temperature: 24.00000020:06:32.754 > [Pylontech] chargeStatusBits: 1 1 020:06:32.861 > Fetch inverter: 114190531163 20:06:33.146 > TX RealTimeRunData Channel: 75 --> 15 90 53 11 63 90 53 11 63 80 0B 00 66 63 4C 17 00 00 00 00 00 00 00 00 1C F1 2D 20:06:33.351 > Interrupt received 20:06:33.439 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 01 00 01 01 EE 01 83 07 76 01 EF 01 78 07 41 00 02 5A | -80 dBm 20:06:33.517 > Interrupt received 20:06:33.620 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 02 E6 D8 00 02 7B DA 00 79 00 75 09 2D 13 89 0E 03 B5 | -80 dBm 20:06:33.722 > Interrupt received 20:06:33.830 > RX Channel: 40 --> 95 90 53 11 63 90 53 11 63 83 00 03 00 99 03 E8 01 23 00 55 49 6F 36 | -80 dBm 20:06:33.916 > PowerMeterClass: TotalPower: -8.24 20:06:34.033 > [DPL::loop] * ENTER ** 20:06:34.093 > [DPL::loop] battery interface enabled, SoC: 72 %, StartTH: 45 %, StopTH: 15 %, SoC age: 1 s, ignore: no 20:06:34.155 > [DPL::getBatteryVoltage] BMS: 49.45 V, MPPT: 49.46 V, inverter: 49.70 V, returning: 49.45V 20:06:34.210 > [DPL::loop] dcVoltage: 49.45 V, loadCorrectedVoltage: 49.46 V, StartTH: 52.00 V, StopTH: 47.00 V 20:06:34.277 > [DPL::loop] StartTH reached: yes, StopTH reached: no, SolarPT enabled, use at night: no 20:06:34.351 > [DPL::calcPowerLimit] battery use allowed, solar power (DC): 0 W 20:06:34.463 > [DPL::calcPowerLimit] target consumption: -5 W, base load: 12 W, power meter does NOT include inverter output 20:06:34.518 > [DPL::calcPowerLimit] power meter value: -8 W, power meter valid: yes, inverter output: 9 W, solar power (AC): 0 W 20:06:34.584 > [DPL::calcPowerLimit] match household consumption with limit of -3 W 20:06:34.887 > [DPL::setNewPowerLimit] input limit: -3 W, min limit: 10 W, max limit: 500 W, hysteresis: 5 W 20:06:35.398 > [DPL::announceStatus] calculated limit is less than minimum power limit 20:06:35.577 > [DPL::updateInverter] Stopping inverter... 20:06:35.678 > RX Period End 20:06:35.786 > Success 20:06:35.842 > [DPL::announceStatus] waiting for a start/stop/restart command to complete 20:06:35.903 > TX AlarmData Channel: 3 --> 15 90 53 11 63 90 53 11 63 80 11 00 66 63 4C 17 00 00 00 00 00 00 00 00 C6 EA F6 20:06:35.966 > Interrupt received 20:06:36.079 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 01 00 01 B0 01 00 01 4A 67 4A 67 00 00 00 00 70 7C 29 | -80 dBm 20:06:36.187 > Interrupt received 20:06:36.634 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 02 00 39 53 FA 54 04 00 00 00 00 70 7C 00 3B 54 0F 3B | -80 dBm 20:06:36.839 > [Pylontech] Alarms: 0 0 0 0 0 0 020:06:37.042 > [Pylontech] Warnings: 0 0 0 0 0 0 020:06:37.242 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:06:37.822 > [Pylontech] soc: 72 soh: 10020:06:37.887 > [Pylontech] voltage: 49.430000 current: -7.300000 temperature: 24.00000020:06:37.950 > [Pylontech] chargeStatusBits: 1 1 020:06:38.018 > Interrupt received 20:06:38.076 > RX Channel: 40 --> 95 90 53 11 63 90 53 11 63 03 54 1A 00 00 00 00 70 7C 00 3D 54 24 54 2F 00 00 E2 | -80 dBm 20:06:38.221 > Interrupt received 20:06:38.289 > RX Channel: 40 --> 95 90 53 11 63 90 53 11 63 04 00 00 70 7C 00 3F 54 3A 54 44 00 00 00 00 70 7C D0 | -80 dBm 20:06:38.342 > Interrupt received 20:06:38.395 > RX Channel: 40 --> 95 90 53 11 63 90 53 11 63 05 00 41 54 51 54 65 00 00 00 00 70 7C 00 43 54 6F 91 | -80 dBm 20:06:38.475 > Interrupt received 20:06:38.535 > RX Channel: 40 --> 95 90 53 11 63 90 53 11 63 06 54 7C 00 00 00 00 70 7C 00 45 54 86 54 99 00 00 ED | -80 dBm 20:06:38.627 > Interrupt received 20:06:38.718 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 07 00 00 70 7C 00 47 55 15 55 26 00 00 00 00 70 7C E6 | -80 dBm 20:06:38.805 > Interrupt received 20:06:38.896 > RX Channel: 40 --> 95 90 53 11 63 90 53 11 63 08 00 49 55 38 55 43 00 00 00 00 70 7C 00 4B 55 4D F0 | -80 dBm 20:06:38.984 > Interrupt received 20:06:39.080 > RX Channel: 40 --> 95 90 53 11 63 90 53 11 63 09 55 58 00 00 00 00 70 7C 00 4D 55 63 55 6D 00 00 DE | -80 dBm 20:06:39.173 > Interrupt received 20:06:39.264 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 0A 00 00 70 7C 00 4F 55 78 55 83 00 00 00 00 70 7C 2B | -80 dBm 20:06:39.358 > Interrupt received 20:06:39.420 > RX Channel: 40 --> 95 90 53 11 63 90 53 11 63 0B 00 51 55 8F 55 A7 00 00 00 00 70 7C 00 53 55 AD 40 | -80 dBm 20:06:39.485 > Interrupt received 20:06:39.655 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 8C 55 BA 00 00 00 00 DB E6 CB | -80 dBm 20:06:39.905 > RX Period End 20:06:39.978 > Success 20:06:40.036 > TX PowerControl Channel: 23 --> 51 90 53 11 63 90 53 11 63 81 01 00 20 00 F1 20:06:40.096 > Interrupt received 20:06:40.314 > RX Channel: 61 --> D1 90 53 11 63 90 53 11 63 81 00 00 01 00 B4 01 E4 | -80 dBm 20:06:40.622 > [Pylontech] Alarms: 0 0 0 0 0 0 020:06:40.835 > [Pylontech] Warnings: 0 0 0 0 0 0 020:06:41.134 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:06:41.302 > [Pylontech] soc: 72 soh: 10020:06:41.405 > [Pylontech] voltage: 49.410000 current: -7.300000 temperature: 24.00000020:06:41.461 > [Pylontech] chargeStatusBits: 1 1 020:06:41.511 > [Pylontech] Manufacturer: PYLON 20:06:41.571 > RX Period End 20:06:41.850 > Success 20:06:42.018 > Fetch inverter: 114190531163 20:06:42.259 > TX RealTimeRunData Channel: 40 --> 15 90 53 11 63 90 53 11 63 80 0B 00 66 63 4C 1C 00 00 00 00 00 00 00 00 2C 82 65 20:06:42.464 > Interrupt received 20:06:42.628 > RX Channel: 61 --> 95 90 53 11 63 90 53 11 63 01 00 01 01 F0 00 02 00 0A 01 F1 00 02 00 08 00 02 94 | -80 dBm 20:06:42.743 > [Pylontech] Alarms: 0 0 0 0 0 0 020:06:42.937 > [Pylontech] Warnings: 0 0 0 0 0 0 020:06:43.053 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:06:43.119 > [Pylontech] soc: 72 soh: 10020:06:43.349 > [Pylontech] voltage: 49.520000 current: -3.600000 temperature: 24.00000020:06:43.439 > [Pylontech] chargeStatusBits: 1 1 020:06:43.549 > RX Period End 20:06:43.611 > Last missing 20:06:43.685 > Request retransmit: 2 20:06:43.746 > TX RequestFrame Channel: 61 --> 15 90 53 11 63 90 53 11 63 82 97 20:06:43.813 > Interrupt received 20:06:43.906 > RX Channel: 40 --> 95 90 53 11 63 90 53 11 63 02 E6 D9 00 02 7B DA 00 7A 00 75 09 22 13 89 00 00 B5 | -80 dBm 20:06:43.987 > RX Period End 20:06:44.096 > Last missing 20:06:44.307 > Request retransmit: 3 20:06:44.453 > TX RequestFrame Channel: 75 --> 15 90 53 11 63 90 53 11 63 83 96 20:06:44.549 > Interrupt received 20:06:44.686 > RX Channel: 61 --> 95 90 53 11 63 90 53 11 63 83 00 00 00 00 00 00 01 23 00 56 21 66 25 | -80 dBm 20:06:44.788 > RX Period End 20:06:44.863 > Success 20:06:44.917 > [DPL::announceStatus] waiting for sufficiently recent power meter reading 20:06:44.987 > [Pylontech] Alarms: 0 0 0 0 0 0 020:06:45.044 > [Pylontech] Warnings: 0 0 0 0 0 0 020:06:45.118 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:06:45.331 > [Pylontech] soc: 72 soh: 10020:06:45.952 > [Pylontech] voltage: 49.579998 current: 0.200000 temperature: 24.00000020:06:46.150 > [Pylontech] chargeStatusBits: 1 1 020:06:46.355 > [Pylontech] Alarms: 0 0 0 0 0 0 020:06:46.519 > [Pylontech] Warnings: 0 0 0 0 0 0 020:06:46.576 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:06:46.875 > [Pylontech] soc: 72 soh: 10020:06:47.094 > [Pylontech] voltage: 49.599998 current: 0.200000 temperature: 24.00000020:06:47.416 > [Pylontech] chargeStatusBits: 1 1 020:06:47.656 > Fetch inverter: 114190531163 20:06:47.708 > TX RealTimeRunData Channel: 3 --> 15 90 53 11 63 90 53 11 63 80 0B 00 66 63 4C 21 00 00 00 00 00 00 00 00 BD 8E C5 20:06:47.772 > Interrupt received 20:06:47.846 > RX Channel: 40 --> 95 90 53 11 63 90 53 11 63 01 00 01 01 F1 00 02 00 0A 01 F2 00 02 00 08 00 02 96 | -80 dBm 20:06:47.970 > RX Period End 20:06:48.278 > Last missing 20:06:48.861 > Request retransmit: 2 20:06:48.964 > TX RequestFrame Channel: 23 --> 15 90 53 11 63 90 53 11 63 82 97 20:06:49.081 > PowerMeterClass: TotalPower: 349.27 20:06:49.166 > [DPL::loop] * ENTER ** 20:06:49.235 > [DPL::loop] battery interface enabled, SoC: 72 %, StartTH: 45 %, StopTH: 15 %, SoC age: 1 s, ignore: no 20:06:49.313 > [DPL::getBatteryVoltage] BMS: 49.60 V, MPPT: 49.69 V, inverter: 49.60 V, returning: 49.60V 20:06:49.366 > [DPL::loop] dcVoltage: 49.60 V, loadCorrectedVoltage: 49.60 V, StartTH: 52.00 V, StopTH: 47.00 V 20:06:49.505 > [DPL::loop] StartTH reached: yes, StopTH reached: no, SolarPT enabled, use at night: no 20:06:49.621 > [DPL::calcPowerLimit] battery use allowed, solar power (DC): 0 W 20:06:49.732 > [DPL::calcPowerLimit] target consumption: -5 W, base load: 12 W, power meter does NOT include inverter output 20:06:49.817 > [DPL::calcPowerLimit] power meter value: 349 W, power meter valid: yes, inverter output: 0 W, solar power (AC): 0 W 20:06:49.934 > [DPL::calcPowerLimit] match household consumption with limit of 354 W 20:06:49.997 > [DPL::setNewPowerLimit] input limit: 354 W, min limit: 10 W, max limit: 500 W, hysteresis: 5 W 20:06:50.047 > [DPL::setNewPowerLimit] inverter max: 800 W, inverter is NOT producing, requesting: 354 W, reported: 352 W, diff: 2 W 20:06:50.345 > [DPL::updateInverter] Starting inverter... 20:06:50.404 > RX Period End 20:06:50.475 > Last missing 20:06:50.536 > Request retransmit: 2 20:06:50.617 > TX RequestFrame Channel: 40 --> 15 90 53 11 63 90 53 11 63 82 97 20:06:50.679 > [DPL::announceStatus] waiting for a start/stop/restart command to complete 20:06:50.735 > [Pylontech] Alarms: 0 0 0 0 0 0 020:06:50.799 > [Pylontech] Warnings: 0 0 0 0 0 0 020:06:50.876 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:06:50.928 > [Pylontech] soc: 72 soh: 10020:06:50.979 > [Pylontech] voltage: 49.610001 current: 0.200000 temperature: 24.00000020:06:51.044 > [Pylontech] chargeStatusBits: 1 1 020:06:51.102 > [Pylontech] Manufacturer: PYLON 20:06:51.230 > RX Period End 20:06:51.283 > Last missing 20:06:51.343 > Request retransmit: 2 20:06:51.401 > TX RequestFrame Channel: 61 --> 15 90 53 11 63 90 53 11 63 82 97 20:06:51.540 > Interrupt received 20:06:51.612 > RX Channel: 75 --> 95 90 53 11 63 90 53 11 63 02 E6 D9 00 02 7B DA 00 7A 00 75 09 22 13 88 00 00 B4 | -80 dBm 20:06:51.987 > RX Period End 20:06:52.294 > Last missing 20:06:52.807 > Request retransmit: 3 20:06:53.018 > TX RequestFrame Channel: 75 --> 15 90 53 11 63 90 53 11 63 83 96 20:06:53.308 > Interrupt received 20:06:53.626 > RX Channel: 75 --> 95 90 53 11 63 90 53 11 63 83 00 00 00 00 00 00 01 22 00 56 CC 89 26 | -80 dBm 20:06:53.710 > RX Period End 20:06:53.760 > Success 20:06:53.813 > TX AlarmData Channel: 3 --> 15 90 53 11 63 90 53 11 63 80 11 00 66 63 4C 21 00 00 00 00 00 00 00 00 67 95 1E 20:06:53.886 > Interrupt received 20:06:54.137 > RX Channel: 75 --> 95 90 53 11 63 90 53 11 63 01 00 01 B0 01 00 01 4A 67 4A 67 00 00 00 00 70 7C 29 | -80 dBm 20:06:54.303 > Interrupt received 20:06:54.402 > RX Channel: 75 --> 95 90 53 11 63 90 53 11 63 02 00 3B 54 0F 54 1A 00 00 00 00 70 7C 00 3D 54 24 F8 | -80 dBm 20:06:54.483 > Interrupt received 20:06:54.588 > RX Channel: 75 --> 95 90 53 11 63 90 53 11 63 03 54 2F 00 00 00 00 70 7C 00 3F 54 3A 54 44 00 00 A0 | -80 dBm 20:06:54.729 > Interrupt received 20:06:54.784 > RX Channel: 3 --> 95 90 53 11 63 90 53 11 63 04 00 00 70 7C 00 41 54 51 54 65 00 00 00 00 70 7C E4 | -80 dBm 20:06:54.845 > Interrupt received 20:06:54.920 > RX Channel: 3 --> 95 90 53 11 63 90 53 11 63 05 00 43 54 6F 54 7C 00 00 00 00 70 7C 00 45 54 86 5B | -80 dBm 20:06:54.968 > Interrupt received 20:06:55.020 > RX Channel: 75 --> 95 90 53 11 63 90 53 11 63 06 54 99 00 00 00 00 70 7C 00 47 55 15 55 26 00 00 26 | -80 dBm 20:06:55.088 > Interrupt received 20:06:55.142 > RX Channel: 75 --> 95 90 53 11 63 90 53 11 63 07 00 00 70 7C 00 49 55 38 55 43 00 00 00 00 70 7C A0 | -80 dBm 20:06:55.351 > Interrupt received 20:06:55.440 > RX Channel: 75 --> 95 90 53 11 63 90 53 11 63 09 55 6D 00 00 00 00 70 7C 00 4F 55 78 55 83 00 00 1C | -80 dBm 20:06:55.559 > Interrupt received 20:06:55.624 > RX Channel: 75 --> 95 90 53 11 63 90 53 11 63 0A 00 00 70 7C 00 51 55 8F 55 A7 00 00 00 00 70 7C E6 | -80 dBm 20:06:55.879 > Interrupt received 20:06:56.085 > RX Channel: 3 --> 95 90 53 11 63 90 53 11 63 0B 00 53 55 AD 55 BA 00 00 00 00 70 7C 00 55 55 C2 14 | -80 dBm 20:06:56.290 > Interrupt received 20:06:56.454 > RX Channel: 75 --> 95 90 53 11 63 90 53 11 63 8C 55 CF 00 00 00 00 47 E8 2C | -80 dBm 20:06:56.516 > RX Period End 20:06:56.580 > Middle missing 20:06:57.005 > Request retransmit: 8 20:06:57.210 > TX RequestFrame Channel: 23 --> 15 90 53 11 63 90 53 11 63 88 9D 20:06:57.414 > Interrupt received 20:06:57.684 > RX Channel: 3 --> 95 90 53 11 63 90 53 11 63 08 00 4B 55 4D 55 58 00 00 00 00 70 7C 00 4D 55 63 B4 | -80 dBm 20:06:57.745 > RX Period End 20:06:57.865 > Success 20:06:57.930 > TX PowerControl Channel: 40 --> 51 90 53 11 63 90 53 11 63 81 00 00 B0 01 61 20:06:57.983 > Interrupt received 20:06:58.095 > RX Channel: 3 --> D1 90 53 11 63 90 53 11 63 81 00 00 00 00 24 00 74 | -80 dBm 20:06:58.192 > [Pylontech] Alarms: 0 0 0 0 0 0 020:06:58.243 > [Pylontech] Warnings: 0 0 0 0 0 0 020:06:58.404 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:06:58.507 > [Pylontech] soc: 72 soh: 10020:06:58.572 > [Pylontech] voltage: 49.619999 current: 0.000000 temperature: 24.00000020:06:58.639 > [Pylontech] chargeStatusBits: 1 1 020:06:58.699 > [Pylontech] Manufacturer: PYLON 20:06:58.950 > RX Period End 20:06:59.258 > Success 20:06:59.465 > Fetch inverter: 114190531163 20:06:59.597 > TX RealTimeRunData Channel: 61 --> 15 90 53 11 63 90 53 11 63 80 0B 00 66 63 4C 26 00 00 00 00 00 00 00 00 8D A8 D4 20:06:59.689 > Interrupt received 20:06:59.975 > RX Channel: 3 --> 95 90 53 11 63 90 53 11 63 01 00 01 01 F0 00 DA 04 37 01 F0 00 CE 03 F9 00 02 4A | -80 dBm 20:07:00.179 > Interrupt received 20:07:00.384 > RX Channel: 3 --> 95 90 53 11 63 90 53 11 63 02 E6 D9 00 02 7B DA 00 7A 00 75 09 27 13 87 07 C8 71 | -80 dBm 20:07:00.589 > Interrupt received 20:07:00.753 > RX Channel: 3 --> 95 90 53 11 63 90 53 11 63 83 00 01 00 55 03 E8 01 22 00 57 23 23 DD | -80 dBm 20:07:00.813 > [Pylontech] Alarms: 0 0 0 0 0 0 020:07:01.102 > [Pylontech] Warnings: 0 0 0 0 0 0 020:07:01.266 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:07:01.316 > [Pylontech] soc: 72 soh: 10020:07:01.372 > [Pylontech] voltage: 49.529999 current: 0.000000 temperature: 24.00000020:07:01.438 > [Pylontech] chargeStatusBits: 1 1 020:07:01.517 > [Pylontech] Manufacturer: PYLON 20:07:01.576 > RX Period End 20:07:01.642 > Success 20:07:01.713 > [DPL::announceStatus] waiting for sufficiently recent power meter reading 20:07:01.773 > [Pylontech] Alarms: 0 0 0 0 0 0 020:07:01.828 > [Pylontech] Warnings: 0 0 0 0 0 0 020:07:01.888 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:07:01.948 > [Pylontech] soc: 72 soh: 10020:07:02.019 > [Pylontech] voltage: 49.459999 current: -7.200000 temperature: 24.00000020:07:02.042 > [Pylontech] chargeStatusBits: 1 1 020:07:02.305 > [Pylontech] Alarms: 0 0 0 0 0 0 020:07:02.398 > [Pylontech] Warnings: 0 0 0 0 0 0 020:07:02.491 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:07:02.601 > [Pylontech] soc: 72 soh: 10020:07:02.703 > [Pylontech] voltage: 49.430000 current: -7.300000 temperature: 24.00000020:07:02.754 > [Pylontech] chargeStatusBits: 1 1 020:07:02.822 > [Pylontech] Manufacturer: PYLON 20:07:02.898 > Fetch inverter: 114190531163 20:07:02.957 > TX RealTimeRunData Channel: 75 --> 15 90 53 11 63 90 53 11 63 80 0B 00 66 63 4C 2B 00 00 00 00 00 00 00 00 1D F0 11 20:07:03.108 > Interrupt received 20:07:03.184 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 01 00 01 01 EE 01 83 07 76 01 EF 01 79 07 44 00 02 5E | -80 dBm 20:07:03.248 > Interrupt received 20:07:03.317 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 02 E6 D9 00 02 7B DB 00 7A 00 76 09 28 13 88 0E 05 B7 | -80 dBm 20:07:03.415 > Interrupt received 20:07:03.485 > RX Channel: 40 --> 95 90 53 11 63 90 53 11 63 83 00 03 00 99 03 E8 01 23 00 57 D8 96 5C | -80 dBm 20:07:03.786 > RX Period End 20:07:03.973 > Success 20:07:04.174 > TX AlarmData Channel: 3 --> 15 90 53 11 63 90 53 11 63 80 11 00 66 63 4C 2B 00 00 00 00 00 00 00 00 C7 EB CA 20:07:04.379 > Interrupt received 20:07:04.543 > RX Channel: 75 --> 95 90 53 11 63 90 53 11 63 01 00 01 B0 01 00 01 4A 67 4A 67 00 00 00 00 70 7C 29 | -80 dBm 20:07:04.611 > Interrupt received 20:07:04.691 > RX Channel: 3 --> 95 90 53 11 63 90 53 11 63 03 54 2F 00 00 00 00 70 7C 00 3F 54 3A 54 44 00 00 A0 | -80 dBm 20:07:04.819 > Interrupt received 20:07:04.932 > RX Channel: 40 --> 95 90 53 11 63 90 53 11 63 04 00 00 70 7C 00 41 54 51 54 65 00 00 00 00 70 7C E4 | -80 dBm 20:07:05.009 > Interrupt received 20:07:05.197 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 05 00 43 54 6F 54 7C 00 00 00 00 70 7C 00 45 54 86 5B | -80 dBm 20:07:05.402 > PowerMeterClass: TotalPower: -8.11 20:07:05.527 > [DPL::loop] * ENTER ** 20:07:05.651 > [DPL::loop] battery interface enabled, SoC: 72 %, StartTH: 45 %, StopTH: 15 %, SoC age: 2 s, ignore: no 20:07:05.734 > [DPL::getBatteryVoltage] BMS: 49.43 V, MPPT: 49.46 V, inverter: 49.40 V, returning: 49.43V 20:07:05.809 > [DPL::loop] dcVoltage: 49.43 V, loadCorrectedVoltage: 49.79 V, StartTH: 52.00 V, StopTH: 47.00 V 20:07:05.866 > [DPL::loop] StartTH reached: yes, StopTH reached: no, SolarPT enabled, use at night: no 20:07:05.934 > [DPL::calcPowerLimit] battery use allowed, solar power (DC): 0 W 20:07:06.081 > [DPL::calcPowerLimit] target consumption: -5 W, base load: 12 W, power meter does NOT include inverter output 20:07:06.183 > [DPL::calcPowerLimit] power meter value: -8 W, power meter valid: yes, inverter output: 358 W, solar power (AC): 0 W 20:07:06.242 > [DPL::calcPowerLimit] match household consumption with limit of -3 W 20:07:06.297 > [DPL::setNewPowerLimit] input limit: -3 W, min limit: 10 W, max limit: 500 W, hysteresis: 5 W 20:07:06.352 > [DPL::announceStatus] calculated limit is less than minimum power limit 20:07:06.529 > [DPL::updateInverter] Stopping inverter... 20:07:07.350 > [Pylontech] Alarms: 0 0 0 0 0 0 020:07:07.551 > [Pylontech] Warnings: 0 0 0 0 0 0 020:07:07.726 > RX Period End 20:07:07.961 > Last missing 20:07:08.268 > Request retransmit: 6 20:07:08.321 > TX RequestFrame Channel: 23 --> 15 90 53 11 63 90 53 11 63 86 93 20:07:08.441 > [DPL::announceStatus] waiting for a start/stop/restart command to complete 20:07:08.530 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:07:08.585 > [Pylontech] soc: 72 soh: 10020:07:08.643 > [Pylontech] voltage: 49.419998 current: -7.300000 temperature: 24.00000020:07:08.749 > [Pylontech] chargeStatusBits: 1 1 020:07:08.802 > RX Period End 20:07:09.098 > Last missing 20:07:09.292 > Request retransmit: 6 20:07:09.456 > TX RequestFrame Channel: 40 --> 15 90 53 11 63 90 53 11 63 86 93 20:07:09.512 > Interrupt received 20:07:09.568 > RX Channel: 40 --> 95 90 53 11 63 90 53 11 63 06 54 99 00 00 00 00 70 7C 00 47 55 15 55 26 00 00 26 | -80 dBm 20:07:09.668 > RX Period End 20:07:09.719 > Last missing 20:07:09.777 > Request retransmit: 7 20:07:09.876 > TX RequestFrame Channel: 61 --> 15 90 53 11 63 90 53 11 63 87 92 20:07:09.966 > Interrupt received 20:07:10.095 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 07 00 00 70 7C 00 49 55 38 55 43 00 00 00 00 70 7C A0 | -80 dBm 20:07:10.152 > RX Period End 20:07:10.279 > Last missing 20:07:10.624 > Request retransmit: 8 20:07:10.707 > TX RequestFrame Channel: 75 --> 15 90 53 11 63 90 53 11 63 88 9D 20:07:10.766 > RX Period End 20:07:10.896 > Last missing 20:07:10.967 > Request retransmit: 8 20:07:11.112 > TX RequestFrame Channel: 3 --> 15 90 53 11 63 90 53 11 63 88 9D 20:07:11.169 > Interrupt received 20:07:11.221 > RX Channel: 40 --> 95 90 53 11 63 90 53 11 63 08 00 4B 55 4D 55 58 00 00 00 00 70 7C 00 4D 55 63 B4 | -80 dBm 20:07:11.282 > RX Period End 20:07:11.338 > Last missing 20:07:11.451 > Retransmit timeout 20:07:11.648 > TX PowerControl Channel: 23 --> 51 90 53 11 63 90 53 11 63 81 01 00 20 00 F1 20:07:12.057 > Interrupt received 20:07:12.266 > RX Channel: 23 --> D1 90 53 11 63 90 53 11 63 81 00 00 01 00 B4 01 E4 | -80 dBm 20:07:12.640 > [Pylontech] Alarms: 0 0 0 0 0 0 020:07:12.739 > [Pylontech] Warnings: 0 0 0 0 0 0 020:07:12.799 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:07:12.853 > [Pylontech] soc: 72 soh: 10020:07:13.286 > [Pylontech] voltage: 49.410000 current: -7.300000 temperature: 24.00000020:07:13.355 > [Pylontech] chargeStatusBits: 1 1 020:07:13.765 > [Pylontech] Manufacturer: PYLON 20:07:13.861 > RX Period End 20:07:13.976 > Success 20:07:14.036 > Fetch inverter: 114190531163 20:07:14.095 > TX RealTimeRunData Channel: 40 --> 15 90 53 11 63 90 53 11 63 80 0B 00 66 63 4C 30 00 00 00 00 00 00 00 00 ED 4E 44 20:07:14.149 > Interrupt received 20:07:14.218 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 01 00 01 01 F0 00 0E 00 46 01 F1 00 0D 00 43 00 02 90 | -80 dBm 20:07:14.284 > Interrupt received 20:07:14.375 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 02 E6 D9 00 02 7B DB 00 7A 00 76 09 20 13 88 00 38 8C | -80 dBm 20:07:14.617 > [Pylontech] Alarms: 0 0 0 0 0 0 020:07:14.700 > [Pylontech] Warnings: 0 0 0 0 0 0 020:07:14.779 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:07:14.856 > [Pylontech] soc: 72 soh: 10020:07:14.923 > [Pylontech] voltage: 49.509998 current: -6.300000 temperature: 24.00000020:07:15.036 > [Pylontech] chargeStatusBits: 1 1 020:07:15.185 > [Pylontech] Manufacturer: PYLON 20:07:15.249 > RX Period End 20:07:15.313 > Last missing 20:07:15.417 > Request retransmit: 3 20:07:15.508 > TX RequestFrame Channel: 61 --> 15 90 53 11 63 90 53 11 63 83 96 20:07:15.914 > Interrupt received 20:07:16.022 > RX Channel: 40 --> 95 90 53 11 63 90 53 11 63 83 00 00 00 02 03 E8 01 23 00 58 71 25 D1 | -80 dBm 20:07:16.080 > RX Period End 20:07:16.131 > Success 20:07:16.196 > [DPL::updateInverter] Stopping inverter... 20:07:16.665 > TX AlarmData Channel: 75 --> 15 90 53 11 63 90 53 11 63 80 11 00 66 63 4C 30 00 00 00 00 00 00 00 00 37 55 9F 20:07:16.975 > Interrupt received 20:07:17.158 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 01 00 01 B0 01 00 01 4A 67 4A 67 00 00 00 00 70 7C 29 | -80 dBm 20:07:17.256 > Interrupt received 20:07:17.488 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 02 00 3D 54 24 54 2F 00 00 00 00 70 7C 00 3F 54 3A FC | -80 dBm 20:07:17.554 > Interrupt received 20:07:17.617 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 03 54 44 00 00 00 00 70 7C 00 41 54 51 54 65 00 00 FF | -80 dBm 20:07:17.752 > Interrupt received 20:07:17.819 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 04 00 00 70 7C 00 43 54 6F 54 7C 00 00 00 00 70 7C C1 | -80 dBm 20:07:17.872 > Interrupt received 20:07:17.926 > RX Channel: 40 --> 95 90 53 11 63 90 53 11 63 05 00 45 54 86 54 99 00 00 00 00 70 7C 00 47 55 15 C1 | -80 dBm 20:07:18.056 > Interrupt received 20:07:18.115 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 06 55 26 00 00 00 00 70 7C 00 49 55 38 55 43 00 00 DE | -80 dBm 20:07:18.428 > Interrupt received 20:07:18.714 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 07 00 00 70 7C 00 4B 55 4D 55 58 00 00 00 00 70 7C CC | -80 dBm 20:07:19.021 > Interrupt received 20:07:19.327 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 08 00 4D 55 63 55 6D 00 00 00 00 70 7C 00 4F 55 78 B0 | -80 dBm 20:07:19.496 > Interrupt received 20:07:19.559 > RX Channel: 40 --> 95 90 53 11 63 90 53 11 63 09 55 83 00 00 00 00 70 7C 00 51 55 8F 55 A7 00 00 3F | -80 dBm 20:07:19.613 > Interrupt received 20:07:19.695 > RX Channel: 40 --> 95 90 53 11 63 90 53 11 63 0A 00 00 70 7C 00 53 55 AD 55 BA 00 00 00 00 70 7C DB | -80 dBm 20:07:19.770 > Interrupt received 20:07:19.835 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 0B 00 55 55 C2 55 CF 00 00 00 00 70 7C 00 57 55 D8 10 | -80 dBm 20:07:19.894 > Interrupt received 20:07:19.947 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 8C 55 E3 00 00 00 00 54 D5 2E | -80 dBm 20:07:20.005 > RX Period End 20:07:20.103 > Success 20:07:20.215 > TX PowerControl Channel: 3 --> 51 90 53 11 63 90 53 11 63 81 01 00 20 00 F1 20:07:20.267 > [Pylontech] Alarms: 0 0 0 0 0 0 020:07:20.329 > [Pylontech] Warnings: 0 0 0 0 0 0 020:07:20.524 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:07:20.578 > [Pylontech] soc: 72 soh: 10020:07:20.629 > [Pylontech] voltage: 49.579998 current: 0.000000 temperature: 24.00000020:07:20.725 > [Pylontech] chargeStatusBits: 1 1 020:07:20.780 > [Pylontech] Manufacturer: PYLON 20:07:20.842 > RX Period End 20:07:20.899 > All missing 20:07:21.040 > Nothing received, resend whole request 20:07:21.140 > TX PowerControl Channel: 23 --> 51 90 53 11 63 90 53 11 63 81 01 00 20 00 F1 20:07:21.203 > [Pylontech] Alarms: 0 0 0 0 0 0 020:07:21.257 > [Pylontech] Warnings: 0 0 0 0 0 0 020:07:21.342 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:07:21.395 > [Pylontech] soc: 72 soh: 10020:07:21.445 > [Pylontech] voltage: 49.590000 current: 0.200000 temperature: 24.00000020:07:21.518 > [Pylontech] chargeStatusBits: 1 1 020:07:21.573 > [Pylontech] Manufacturer: PYLON 20:07:21.638 > RX Period End 20:07:21.699 > All missing 20:07:21.853 > Nothing received, resend whole request 20:07:21.916 > TX PowerControl Channel: 40 --> 51 90 53 11 63 90 53 11 63 81 01 00 20 00 F1 20:07:21.968 > Interrupt received 20:07:22.055 > RX Channel: 40 --> D1 90 53 11 63 90 53 11 63 81 00 00 01 00 B4 01 E4 | -80 dBm 20:07:22.105 > [Pylontech] Alarms: 0 0 0 0 0 0 020:07:22.178 > [Pylontech] Warnings: 0 0 0 0 0 0 020:07:22.284 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:07:22.503 > [Pylontech] soc: 72 soh: 10020:07:22.674 > [Pylontech] voltage: 49.599998 current: 0.000000 temperature: 24.00000020:07:22.729 > [Pylontech] chargeStatusBits: 1 1 020:07:22.793 > PowerMeterClass: TotalPower: 349.54 20:07:22.890 > [DPL::announceStatus] waiting for a start/stop/restart command to complete 20:07:22.947 > RX Period End 20:07:23.072 > Success 20:07:23.134 > Fetch inverter: 114190531163 20:07:23.194 > TX RealTimeRunData Channel: 61 --> 15 90 53 11 63 90 53 11 63 80 0B 00 66 63 4C 38 00 00 00 00 00 00 00 00 2D 29 EB 20:07:23.299 > Interrupt received 20:07:23.368 > RX Channel: 40 --> 95 90 53 11 63 90 53 11 63 01 00 01 01 F1 00 02 00 0A 01 F2 00 02 00 08 00 02 96 | -30 dBm 20:07:23.430 > Interrupt received 20:07:23.535 > RX Channel: 40 --> 95 90 53 11 63 90 53 11 63 02 E6 D9 00 02 7B DB 00 7A 00 76 09 1F 13 88 00 00 8B | -80 dBm 20:07:23.621 > Interrupt received 20:07:23.837 > RX Channel: 61 --> 95 90 53 11 63 90 53 11 63 83 00 00 00 00 00 00 01 22 00 58 38 15 40 | -80 dBm 20:07:24.246 > [Pylontech] Alarms: 0 0 0 0 0 0 020:07:24.553 > [Pylontech] Warnings: 0 0 0 0 0 0 020:07:24.711 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:07:24.768 > [Pylontech] soc: 72 soh: 10020:07:24.821 > [Pylontech] voltage: 49.610001 current: 0.200000 temperature: 24.00000020:07:24.870 > [Pylontech] chargeStatusBits: 1 1 020:07:24.929 > RX Period End 20:07:24.982 > Success 20:07:25.052 > [DPL::announceStatus] waiting for sufficiently recent power meter reading 20:07:25.106 > TX AlarmData Channel: 75 --> 15 90 53 11 63 90 53 11 63 80 11 00 66 63 4C 38 00 00 00 00 00 00 00 00 F7 32 30 20:07:25.191 > Interrupt received 20:07:25.300 > RX Channel: 40 --> 95 90 53 11 63 90 53 11 63 01 00 01 B0 01 00 01 4A 67 4A 67 00 00 00 00 70 7C 29 | -80 dBm 20:07:25.397 > Interrupt received 20:07:25.676 > RX Channel: 61 --> 95 90 53 11 63 90 53 11 63 02 00 3D 54 24 54 2F 00 00 00 00 70 7C 00 3F 54 3A FC | -80 dBm 20:07:25.844 > Interrupt received 20:07:25.900 > RX Channel: 75 --> 95 90 53 11 63 90 53 11 63 03 54 44 00 00 00 00 70 7C 00 41 54 51 54 65 00 00 FF | -80 dBm 20:07:26.489 > Interrupt received 20:07:26.664 > RX Channel: 61 --> 95 90 53 11 63 90 53 11 63 05 00 45 54 86 54 99 00 00 00 00 70 7C 00 47 55 15 C1 | -80 dBm 20:07:26.905 > Interrupt received 20:07:27.217 > RX Channel: 61 --> 95 90 53 11 63 90 53 11 63 07 00 00 70 7C 00 4B 55 4D 55 58 00 00 00 00 70 7C CC | -80 dBm 20:07:27.520 > Interrupt received 20:07:27.636 > RX Channel: 75 --> 95 90 53 11 63 90 53 11 63 08 00 4D 55 63 55 6D 00 00 00 00 70 7C 00 4F 55 78 B0 | -80 dBm 20:07:27.693 > Interrupt received 20:07:27.742 > RX Channel: 3 --> 95 90 53 11 63 90 53 11 63 09 55 83 00 00 00 00 70 7C 00 51 55 8F 55 A7 00 00 3F | -80 dBm 20:07:27.800 > Interrupt received 20:07:27.854 > RX Channel: 75 --> 95 90 53 11 63 90 53 11 63 0A 00 00 70 7C 00 53 55 AD 55 BA 00 00 00 00 70 7C DB | -80 dBm 20:07:28.134 > Interrupt received 20:07:28.503 > RX Channel: 75 --> 95 90 53 11 63 90 53 11 63 0B 00 55 55 C2 55 CF 00 00 00 00 70 7C 00 57 55 D8 10 | -80 dBm 20:07:28.582 > Interrupt received 20:07:28.632 > RX Channel: 3 --> 95 90 53 11 63 90 53 11 63 8C 55 E3 00 00 00 00 54 D5 2E | -80 dBm 20:07:28.712 > RX Period End 20:07:28.912 > Middle missing 20:07:29.022 > Request retransmit: 4 20:07:29.121 > TX RequestFrame Channel: 3 --> 15 90 53 11 63 90 53 11 63 84 91 20:07:29.179 > Interrupt received 20:07:29.232 > RX Channel: 3 --> 95 90 53 11 63 90 53 11 63 04 00 00 70 7C 00 43 54 6F 54 7C 00 00 00 00 70 7C C1 | -80 dBm 20:07:29.341 > RX Period End 20:07:29.425 > Middle missing 20:07:29.528 > Request retransmit: 6 20:07:29.601 > TX RequestFrame Channel: 23 --> 15 90 53 11 63 90 53 11 63 86 93 20:07:29.656 > RX Period End 20:07:29.714 > Middle missing 20:07:29.778 > Request retransmit: 6 20:07:29.835 > TX RequestFrame Channel: 40 --> 15 90 53 11 63 90 53 11 63 86 93 20:07:29.907 > Interrupt received 20:07:29.965 > RX Channel: 3 --> 95 90 53 11 63 90 53 11 63 06 55 26 00 00 00 00 70 7C 00 49 55 38 55 43 00 00 DE | -80 dBm 20:07:30.039 > RX Period End 20:07:30.092 > Success 20:07:30.163 > [Pylontech] Alarms: 0 0 0 0 0 0 020:07:30.264 > [Pylontech] Warnings: 0 0 0 0 0 0 020:07:30.375 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:07:30.482 > [Pylontech] soc: 72 soh: 10020:07:30.759 > [Pylontech] voltage: 49.619999 current: 0.200000 temperature: 24.00000020:07:31.103 > [Pylontech] chargeStatusBits: 1 1 020:07:31.308 > [Pylontech] Manufacturer: PYLON 20:07:31.478 > [Pylontech] Alarms: 0 0 0 0 0 0 020:07:31.527 > [Pylontech] Warnings: 0 0 0 0 0 0 020:07:31.578 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:07:31.634 > [Pylontech] soc: 72 soh: 10020:07:31.692 > [Pylontech] voltage: 49.619999 current: 0.200000 temperature: 24.00000020:07:31.785 > [Pylontech] chargeStatusBits: 1 1 020:07:31.850 > Fetch inverter: 114190531163 20:07:31.907 > TX RealTimeRunData Channel: 61 --> 15 90 53 11 63 90 53 11 63 80 0B 00 66 63 4C 3D 00 00 00 00 00 00 00 00 7D 16 81 20:07:32.009 > Interrupt received 20:07:32.092 > RX Channel: 3 --> 95 90 53 11 63 90 53 11 63 01 00 01 01 F1 00 02 00 0A 01 F2 00 02 00 08 00 02 96 | -80 dBm 20:07:32.190 > Interrupt received 20:07:32.265 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 02 E6 D9 00 02 7B DB 00 7A 00 76 09 1E 13 88 00 00 8A | -80 dBm 20:07:32.323 > RX Period End 20:07:32.451 > Last missing 20:07:32.538 > Request retransmit: 3 20:07:32.609 > TX RequestFrame Channel: 75 --> 15 90 53 11 63 90 53 11 63 83 96 20:07:32.663 > Interrupt received 20:07:32.728 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 83 00 00 00 00 00 00 01 21 00 58 38 24 72 | -80 dBm 20:07:32.811 > RX Period End 20:07:32.925 > Success 20:07:32.990 > [Pylontech] Alarms: 0 0 0 0 0 0 020:07:33.561 > [Pylontech] Warnings: 0 0 0 0 0 0 020:07:33.771 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:07:33.933 > [Pylontech] soc: 72 soh: 10020:07:33.991 > [Pylontech] voltage: 49.629997 current: 0.200000 temperature: 24.00000020:07:34.050 > [Pylontech] chargeStatusBits: 1 1 020:07:34.115 > [Pylontech] Alarms: 0 0 0 0 0 0 020:07:34.181 > [Pylontech] Warnings: 0 0 0 0 0 0 020:07:34.245 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:07:34.342 > [Pylontech] soc: 72 soh: 10020:07:34.400 > [Pylontech] voltage: 49.639999 current: 0.200000 temperature: 24.00000020:07:34.457 > [Pylontech] chargeStatusBits: 1 1 020:07:34.688 > [Pylontech] Manufacturer: PYLON 20:07:34.996 > PowerMeterClass: TotalPower: 347.86 20:07:35.061 > [DPL::loop] * ENTER ** 20:07:35.121 > [DPL::loop] battery interface enabled, SoC: 72 %, StartTH: 45 %, StopTH: 15 %, SoC age: 0 s, ignore: no 20:07:35.278 > [DPL::getBatteryVoltage] BMS: 49.64 V, MPPT: 49.72 V, inverter: 49.70 V, returning: 49.64V 20:07:35.383 > [DPL::loop] dcVoltage: 49.64 V, loadCorrectedVoltage: 49.64 V, StartTH: 52.00 V, StopTH: 47.00 V 20:07:35.476 > [DPL::loop] StartTH reached: yes, StopTH reached: no, SolarPT enabled, use at night: no 20:07:35.680 > [DPL::calcPowerLimit] battery use allowed, solar power (DC): 0 W 20:07:35.740 > [DPL::calcPowerLimit] target consumption: -5 W, base load: 12 W, power meter does NOT include inverter output 20:07:35.875 > [DPL::calcPowerLimit] power meter value: 347 W, power meter valid: yes, inverter output: 0 W, solar power (AC): 0 W 20:07:35.987 > [DPL::calcPowerLimit] match household consumption with limit of 352 W 20:07:36.042 > [DPL::setNewPowerLimit] input limit: 352 W, min limit: 10 W, max limit: 500 W, hysteresis: 5 W 20:07:36.099 > [DPL::setNewPowerLimit] inverter max: 800 W, inverter is NOT producing, requesting: 352 W, reported: 352 W, diff: 0 W 20:07:36.156 > [DPL::updateInverter] Starting inverter... 20:07:36.531 > TX PowerControl Channel: 3 --> 51 90 53 11 63 90 53 11 63 81 00 00 B0 01 61 20:07:36.807 > [DPL::announceStatus] waiting for a start/stop/restart command to complete 20:07:37.206 > Interrupt received 20:07:37.452 > RX Channel: 23 --> D1 90 53 11 63 90 53 11 63 81 00 00 00 00 24 00 74 | -80 dBm 20:07:37.558 > [Pylontech] Alarms: 0 0 0 0 0 0 020:07:37.665 > [Pylontech] Warnings: 0 0 0 0 0 0 020:07:37.724 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:07:37.780 > [Pylontech] soc: 72 soh: 10020:07:37.842 > [Pylontech] voltage: 49.639999 current: 0.200000 temperature: 24.00000020:07:37.905 > [Pylontech] chargeStatusBits: 1 1 020:07:37.972 > RX Period End 20:07:38.035 > Success 20:07:38.145 > Fetch inverter: 114190531163 20:07:38.386 > TX RealTimeRunData Channel: 23 --> 15 90 53 11 63 90 53 11 63 80 0B 00 66 63 4C 44 00 00 00 00 00 00 00 00 EF 19 65 20:07:38.581 > Interrupt received 20:07:38.783 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 01 00 01 01 F0 00 B9 03 94 01 F1 00 AF 03 64 00 02 70 | -80 dBm 20:07:38.989 > RX Period End 20:07:39.318 > Last missing 20:07:39.503 > Request retransmit: 2 20:07:39.705 > TX RequestFrame Channel: 40 --> 15 90 53 11 63 90 53 11 63 82 97 20:07:39.932 > Interrupt received 20:07:40.079 > RX Channel: 40 --> 95 90 53 11 63 90 53 11 63 02 E6 D9 00 02 7B DB 00 7A 00 76 09 22 13 89 06 9D 2C | -80 dBm 20:07:40.134 > [Pylontech] Alarms: 0 0 0 0 0 0 020:07:40.187 > [Pylontech] Warnings: 0 0 0 0 0 0 020:07:40.255 > RX Period End 20:07:40.327 > Last missing 20:07:40.414 > Request retransmit: 3 20:07:40.503 > TX RequestFrame Channel: 61 --> 15 90 53 11 63 90 53 11 63 83 96 20:07:40.590 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:07:40.711 > [Pylontech] soc: 72 soh: 10020:07:40.809 > [Pylontech] voltage: 49.529999 current: -1.200000 temperature: 24.00000020:07:40.876 > [Pylontech] chargeStatusBits: 1 1 020:07:40.948 > Interrupt received 20:07:41.001 > RX Channel: 40 --> 95 90 53 11 63 90 53 11 63 83 00 00 00 48 03 E8 01 21 00 59 60 89 25 | -80 dBm 20:07:41.059 > RX Period End 20:07:41.120 > Success 20:07:41.190 > [DPL::announceStatus] waiting for sufficiently recent power meter reading 20:07:41.281 > [Pylontech] Alarms: 0 0 0 0 0 0 020:07:41.362 > [Pylontech] Warnings: 0 0 0 0 0 0 020:07:41.519 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:07:41.753 > [Pylontech] soc: 72 soh: 10020:07:42.060 > [Pylontech] voltage: 49.469997 current: -7.400000 temperature: 24.00000020:07:42.386 > [Pylontech] chargeStatusBits: 1 1 020:07:42.502 > [Pylontech] Alarms: 0 0 0 0 0 0 020:07:42.614 > [Pylontech] Warnings: 0 0 0 0 0 0 020:07:42.683 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:07:42.738 > [Pylontech] soc: 71 soh: 10020:07:42.795 > [Pylontech] voltage: 49.469997 current: -7.400000 temperature: 24.00000020:07:42.862 > [Pylontech] chargeStatusBits: 1 1 020:07:42.920 > Fetch inverter: 114190531163 20:07:42.984 > TX RealTimeRunData Channel: 75 --> 15 90 53 11 63 90 53 11 63 80 0B 00 66 63 4C 49 00 00 00 00 00 00 00 00 7F 41 A0 20:07:43.292 > Interrupt received 20:07:43.385 > RX Channel: 40 --> 95 90 53 11 63 90 53 11 63 01 00 01 01 EE 01 88 07 8C 01 EF 01 7D 07 59 00 02 B6 | -80 dBm 20:07:43.597 > Interrupt received 20:07:43.869 > RX Channel: 61 --> 95 90 53 11 63 90 53 11 63 02 E6 D9 00 02 7B DB 00 7A 00 76 09 27 13 8A 0E 2E 91 | -80 dBm 20:07:43.974 > Interrupt received 20:07:44.035 > RX Channel: 61 --> 95 90 53 11 63 90 53 11 63 83 00 00 00 9B 03 E8 01 21 00 59 B3 8C 20 | -80 dBm 20:07:44.090 > RX Period End 20:07:44.182 > Success 20:07:44.235 > TX AlarmData Channel: 3 --> 15 90 53 11 63 90 53 11 63 80 11 00 66 63 4C 49 00 00 00 00 00 00 00 00 A5 5A 7B 20:07:44.299 > Interrupt received 20:07:44.352 > RX Channel: 61 --> 95 90 53 11 63 90 53 11 63 01 00 01 B0 01 00 01 4A 67 4A 67 00 00 00 00 70 7C 29 | -80 dBm 20:07:44.407 > Interrupt received 20:07:44.469 > RX Channel: 75 --> 95 90 53 11 63 90 53 11 63 02 00 3D 54 24 54 2F 00 00 00 00 70 7C 00 3F 54 3A FC | -80 dBm 20:07:44.527 > Interrupt received 20:07:44.584 > RX Channel: 61 --> 95 90 53 11 63 90 53 11 63 03 54 44 00 00 00 00 70 7C 00 41 54 51 54 65 00 00 FF | -80 dBm 20:07:44.677 > Interrupt received 20:07:44.732 > RX Channel: 75 --> 95 90 53 11 63 90 53 11 63 04 00 00 70 7C 00 43 54 6F 54 7C 00 00 00 00 70 7C C1 | -80 dBm 20:07:44.783 > Interrupt received 20:07:44.844 > RX Channel: 61 --> 95 90 53 11 63 90 53 11 63 05 00 45 54 86 54 99 00 00 00 00 70 7C 00 47 55 15 C1 | -80 dBm 20:07:44.900 > Interrupt received 20:07:45.132 > RX Channel: 61 --> 95 90 53 11 63 90 53 11 63 06 55 26 00 00 00 00 70 7C 00 49 55 38 55 43 00 00 DE | -80 dBm 20:07:45.190 > Interrupt received 20:07:45.305 > RX Channel: 61 --> 95 90 53 11 63 90 53 11 63 07 00 00 70 7C 00 4B 55 4D 55 58 00 00 00 00 70 7C CC | -80 dBm 20:07:45.403 > Interrupt received 20:07:45.463 > RX Channel: 75 --> 95 90 53 11 63 90 53 11 63 08 00 4D 55 63 55 6D 00 00 00 00 70 7C 00 4F 55 78 B0 | -80 dBm 20:07:45.575 > Interrupt received 20:07:45.671 > RX Channel: 75 --> 95 90 53 11 63 90 53 11 63 09 55 83 00 00 00 00 70 7C 00 51 55 8F 55 A7 00 00 3F | -80 dBm 20:07:45.737 > Interrupt received 20:07:45.788 > RX Channel: 61 --> 95 90 53 11 63 90 53 11 63 0A 00 00 70 7C 00 53 55 AD 55 BA 00 00 00 00 70 7C DB | -80 dBm 20:07:45.846 > Interrupt received 20:07:45.897 > RX Channel: 61 --> 95 90 53 11 63 90 53 11 63 0B 00 55 55 C2 55 CF 00 00 00 00 70 7C 00 57 55 D8 10 | -80 dBm 20:07:45.960 > Interrupt received 20:07:46.026 > RX Channel: 75 --> 95 90 53 11 63 90 53 11 63 8C 55 E3 00 00 00 00 54 D5 2E | -80 dBm 20:07:46.082 > RX Period End 20:07:46.467 > Success 20:07:46.668 > [Pylontech] Alarms: 0 0 0 0 0 0 020:07:46.978 > [Pylontech] Warnings: 0 0 0 0 0 0 020:07:47.181 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:07:47.596 > [Pylontech] soc: 71 soh: 10020:07:47.749 > [Pylontech] voltage: 49.469997 current: -7.400000 temperature: 24.00000020:07:47.857 > [Pylontech] chargeStatusBits: 1 1 020:07:47.977 > [Pylontech] Manufacturer: PYLON 20:07:48.034 > PowerMeterClass: TotalPower: -13.52 20:07:48.173 > [DPL::loop] * ENTER ** 20:07:48.273 > [DPL::loop] battery interface enabled, SoC: 71 %, StartTH: 45 %, StopTH: 15 %, SoC age: 0 s, ignore: no 20:07:48.372 > [DPL::getBatteryVoltage] BMS: 49.47 V, MPPT: 49.47 V, inverter: 49.40 V, returning: 49.47V 20:07:48.442 > [DPL::loop] dcVoltage: 49.47 V, loadCorrectedVoltage: 49.83 V, StartTH: 52.00 V, StopTH: 47.00 V 20:07:48.499 > [DPL::loop] StartTH reached: yes, StopTH reached: no, SolarPT enabled, use at night: no 20:07:48.565 > [DPL::calcPowerLimit] battery use allowed, solar power (DC): 0 W 20:07:48.821 > [DPL::calcPowerLimit] target consumption: -5 W, base load: 12 W, power meter does NOT include inverter output 20:07:48.889 > [DPL::calcPowerLimit] power meter value: -13 W, power meter valid: yes, inverter output: 363 W, solar power (AC): 0 W 20:07:48.958 > [DPL::calcPowerLimit] match household consumption with limit of -8 W 20:07:49.331 > [DPL::setNewPowerLimit] input limit: -8 W, min limit: 10 W, max limit: 500 W, hysteresis: 5 W 20:07:49.536 > [DPL::announceStatus] calculated limit is less than minimum power limit 20:07:49.845 > [DPL::updateInverter] Stopping inverter... 20:07:50.048 > TX PowerControl Channel: 23 --> 51 90 53 11 63 90 53 11 63 81 01 00 20 00 F1 20:07:50.252 > [DPL::announceStatus] waiting for a start/stop/restart command to complete 20:07:50.463 > Interrupt received 20:07:50.764 > RX Channel: 61 --> D1 90 53 11 63 90 53 11 63 81 00 00 01 00 B4 01 E4 | -80 dBm 20:07:50.884 > [Pylontech] Alarms: 0 0 0 0 0 0 020:07:51.034 > [Pylontech] Warnings: 0 0 0 0 0 0 020:07:51.101 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:07:51.236 > [Pylontech] soc: 71 soh: 10020:07:51.286 > [Pylontech] voltage: 49.469997 current: -7.400000 temperature: 24.00000020:07:51.362 > [Pylontech] chargeStatusBits: 1 1 020:07:51.429 > RX Period End 20:07:51.479 > Success 20:07:51.686 > Fetch inverter: 114190531163 20:07:51.866 > TX RealTimeRunData Channel: 40 --> 15 90 53 11 63 90 53 11 63 80 0B 00 66 63 4C 4E 00 00 00 00 00 00 00 00 4F 67 B1 20:07:51.927 > Interrupt received 20:07:52.060 > RX Channel: 75 --> 95 90 53 11 63 90 53 11 63 01 00 01 01 F0 00 6A 02 09 01 F1 00 67 01 FB 00 02 6A | -80 dBm 20:07:52.301 > Interrupt received 20:07:52.623 > RX Channel: 61 --> 95 90 53 11 63 90 53 11 63 02 E6 DA 00 02 7B DB 00 7B 00 76 09 20 13 89 03 8D 39 | -80 dBm 20:07:52.729 > Interrupt received 20:07:52.822 > RX Channel: 75 --> 95 90 53 11 63 90 53 11 63 83 00 00 00 27 03 E8 01 23 00 5A 12 27 97 | -80 dBm 20:07:52.922 > [Pylontech] Alarms: 0 0 0 0 0 0 020:07:53.006 > [Pylontech] Warnings: 0 0 0 0 0 0 020:07:53.058 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:07:53.111 > [Pylontech] soc: 71 soh: 10020:07:53.324 > [Pylontech] voltage: 49.570000 current: -6.000000 temperature: 24.00000020:07:53.409 > RX Period End 20:07:53.474 > Success 20:07:53.539 > [DPL::updateInverter] Stopping inverter... 20:07:53.597 > [Pylontech] chargeStatusBits: 1 1 020:07:53.841 > TX PowerControl Channel: 61 --> 51 90 53 11 63 90 53 11 63 81 01 00 20 00 F1 20:07:54.003 > Interrupt received 20:07:54.061 > RX Channel: 75 --> D1 90 53 11 63 90 53 11 63 81 00 00 01 00 B4 01 E4 | -80 dBm 20:07:54.113 > [Pylontech] Alarms: 0 0 0 0 0 0 020:07:54.169 > [Pylontech] Warnings: 0 0 0 0 0 0 020:07:54.227 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:07:54.291 > [Pylontech] soc: 71 soh: 10020:07:54.412 > [Pylontech] voltage: 49.590000 current: 0.200000 temperature: 24.00000020:07:54.758 > [Pylontech] chargeStatusBits: 1 1 020:07:55.148 > RX Period End 20:07:55.231 > Success 20:07:55.475 > [Pylontech] Alarms: 0 0 0 0 0 0 020:07:55.647 > [Pylontech] Warnings: 0 0 0 0 0 0 020:07:55.891 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:07:56.091 > [Pylontech] soc: 71 soh: 10020:07:56.151 > [Pylontech] voltage: 49.610001 current: 0.200000 temperature: 24.00000020:07:56.234 > [Pylontech] chargeStatusBits: 1 1 020:07:56.327 > [Pylontech] Manufacturer: PYLON 20:07:56.400 > Fetch inverter: 114190531163 20:07:56.470 > TX RealTimeRunData Channel: 75 --> 15 90 53 11 63 90 53 11 63 80 0B 00 66 63 4C 53 00 00 00 00 00 00 00 00 1F F2 69 20:07:56.540 > Interrupt received 20:07:56.663 > RX Channel: 75 --> 95 90 53 11 63 90 53 11 63 01 00 01 01 F1 00 02 00 0A 01 F1 00 02 00 08 00 02 95 | -80 dBm 20:07:56.716 > Interrupt received 20:07:56.785 > RX Channel: 61 --> 95 90 53 11 63 90 53 11 63 02 E6 DA 00 02 7B DB 00 7B 00 76 09 1E 13 88 00 00 88 | -80 dBm 20:07:56.851 > Interrupt received 20:07:56.903 > RX Channel: 61 --> 95 90 53 11 63 90 53 11 63 83 00 00 00 00 00 00 01 20 00 5A 8E 82 61 | -80 dBm 20:07:57.074 > RX Period End 20:07:57.124 > Success 20:07:57.179 > [DPL::announceStatus] waiting for sufficiently recent power meter reading 20:07:57.284 > TX AlarmData Channel: 3 --> 15 90 53 11 63 90 53 11 63 80 11 00 66 63 4C 53 00 00 00 00 00 00 00 00 C5 E9 B2 20:07:57.523 > Interrupt received 20:07:57.714 > RX Channel: 61 --> 95 90 53 11 63 90 53 11 63 01 00 01 B0 01 00 01 4A 67 4A 67 00 00 00 00 70 7C 29 | -80 dBm 20:07:57.800 > Interrupt received 20:07:57.853 > RX Channel: 75 --> 95 90 53 11 63 90 53 11 63 02 00 3F 54 3A 54 44 00 00 00 00 70 7C 00 41 54 51 9E | -80 dBm 20:07:57.919 > Interrupt received 20:07:57.974 > RX Channel: 3 --> 95 90 53 11 63 90 53 11 63 03 54 65 00 00 00 00 70 7C 00 43 54 6F 54 7C 00 00 FB | -80 dBm 20:07:58.094 > Interrupt received 20:07:58.203 > RX Channel: 75 --> 95 90 53 11 63 90 53 11 63 04 00 00 70 7C 00 45 54 86 54 99 00 00 00 00 70 7C CB | -80 dBm 20:07:58.252 > Interrupt received 20:07:58.547 > RX Channel: 75 --> 95 90 53 11 63 90 53 11 63 05 00 47 55 15 55 26 00 00 00 00 70 7C 00 49 55 38 CC | -80 dBm 20:07:58.751 > Interrupt received 20:07:59.133 > RX Channel: 75 --> 95 90 53 11 63 90 53 11 63 06 55 43 00 00 00 00 70 7C 00 4B 55 4D 55 58 00 00 D7 | -80 dBm 20:07:59.224 > Interrupt received 20:07:59.303 > RX Channel: 75 --> 95 90 53 11 63 90 53 11 63 07 00 00 70 7C 00 4D 55 63 55 6D 00 00 00 00 70 7C D1 | -80 dBm 20:07:59.357 > Interrupt received 20:07:59.436 > RX Channel: 3 --> 95 90 53 11 63 90 53 11 63 08 00 4F 55 78 55 83 00 00 00 00 70 7C 00 51 55 8F AE | -80 dBm 20:07:59.496 > Interrupt received 20:07:59.554 > RX Channel: 3 --> 95 90 53 11 63 90 53 11 63 09 55 A7 00 00 00 00 70 7C 00 53 55 AD 55 BA 00 00 26 | -80 dBm 20:07:59.776 > Interrupt received 20:07:59.939 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 0A 00 00 70 7C 00 55 55 C2 55 CF 00 00 00 00 70 7C C7 | -80 dBm 20:08:00.040 > Interrupt received 20:08:00.280 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 8C 56 00 00 00 00 00 0B E3 A7 | -80 dBm 20:08:00.493 > RX Period End 20:08:00.666 > Middle missing 20:08:00.719 > Request retransmit: 11 20:08:00.772 > TX RequestFrame Channel: 23 --> 15 90 53 11 63 90 53 11 63 8B 9E 20:08:00.838 > Interrupt received 20:08:00.907 > RX Channel: 61 --> 95 90 53 11 63 90 53 11 63 0B 00 57 55 D8 55 E3 00 00 00 00 70 7C 00 59 55 ED 1F | -80 dBm 20:08:00.975 > [Pylontech] Alarms: 0 0 0 0 0 0 020:08:01.058 > [Pylontech] Warnings: 0 0 0 0 0 0 020:08:01.172 > RX Period End 20:08:01.221 > Success 20:08:01.270 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:08:01.357 > [Pylontech] soc: 71 soh: 10020:08:01.453 > [Pylontech] voltage: 49.619999 current: 0.200000 temperature: 24.00000020:08:01.546 > [Pylontech] chargeStatusBits: 1 1 020:08:01.606 > PowerMeterClass: TotalPower: 349.30 20:08:01.659 > [Pylontech] Alarms: 0 0 0 0 0 0 020:08:01.735 > [Pylontech] Warnings: 0 0 0 0 0 0 020:08:01.790 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:08:01.861 > [Pylontech] soc: 71 soh: 10020:08:01.941 > [Pylontech] voltage: 49.619999 current: 0.200000 temperature: 24.00000020:08:02.089 > [Pylontech] chargeStatusBits: 1 1 020:08:02.137 > Fetch inverter: 114190531163 20:08:02.260 > TX RealTimeRunData Channel: 40 --> 15 90 53 11 63 90 53 11 63 80 0B 00 66 63 4C 58 00 00 00 00 00 00 00 00 2F 81 21 20:08:02.320 > Interrupt received 20:08:02.401 > RX Channel: 40 --> 95 90 53 11 63 90 53 11 63 01 00 01 01 F1 00 02 00 0A 01 F2 00 02 00 08 00 02 96 | -80 dBm 20:08:02.449 > Interrupt received 20:08:02.506 > RX Channel: 40 --> 95 90 53 11 63 90 53 11 63 02 E6 DA 00 02 7B DB 00 7B 00 76 09 1E 13 88 00 00 88 | -80 dBm 20:08:02.567 > [Pylontech] Alarms: 0 0 0 0 0 0 020:08:02.621 > [Pylontech] Warnings: 0 0 0 0 0 0 020:08:02.677 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:08:02.806 > [Pylontech] soc: 71 soh: 10020:08:02.888 > [Pylontech] voltage: 49.629997 current: 0.200000 temperature: 24.00000020:08:02.955 > [Pylontech] chargeStatusBits: 1 1 020:08:03.342 > RX Period End 20:08:03.418 > Last missing 20:08:03.484 > Request retransmit: 3 20:08:03.625 > TX RequestFrame Channel: 61 --> 15 90 53 11 63 90 53 11 63 83 96 20:08:03.883 > Interrupt received 20:08:04.076 > RX Channel: 61 --> 95 90 53 11 63 90 53 11 63 83 00 00 00 00 00 00 01 22 00 5A 4E 97 B6 | -80 dBm 20:08:04.387 > RX Period End 20:08:04.490 > Success 20:08:04.572 > [Pylontech] Alarms: 0 0 0 0 0 0 020:08:04.645 > [Pylontech] Warnings: 0 0 0 0 0 0 020:08:04.705 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:08:04.862 > [Pylontech] soc: 71 soh: 10020:08:04.922 > [Pylontech] voltage: 49.639999 current: 0.200000 temperature: 24.00000020:08:04.976 > [Pylontech] chargeStatusBits: 1 1 020:08:05.035 > [Pylontech] Alarms: 0 0 0 0 0 0 020:08:05.095 > [Pylontech] Warnings: 0 0 0 0 0 0 020:08:05.167 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:08:05.270 > [Pylontech] soc: 71 soh: 10020:08:05.341 > [Pylontech] voltage: 49.639999 current: 0.200000 temperature: 24.00000020:08:05.411 > [Pylontech] chargeStatusBits: 1 1 020:08:05.570 > [Pylontech] Manufacturer: PYLON 20:08:05.624 > Fetch inverter: 114190531163 20:08:05.678 > TX RealTimeRunData Channel: 75 --> 15 90 53 11 63 90 53 11 63 80 0B 00 66 63 4C 5D 00 00 00 00 00 00 00 00 7F BE 4B 20:08:05.736 > Interrupt received 20:08:05.790 > RX Channel: 40 --> 95 90 53 11 63 90 53 11 63 01 00 01 01 F1 00 02 00 0A 01 F2 00 02 00 08 00 02 96 | -80 dBm 20:08:05.862 > Interrupt received 20:08:05.924 > RX Channel: 61 --> 95 90 53 11 63 90 53 11 63 02 E6 DA 00 02 7B DB 00 7B 00 76 09 1F 13 89 00 00 88 | -80 dBm 20:08:06.126 > Interrupt received 20:08:06.336 > RX Channel: 75 --> 95 90 53 11 63 90 53 11 63 83 00 00 00 00 00 00 01 21 00 5A CF A4 07 | -80 dBm 20:08:06.490 > RX Period End 20:08:06.545 > Success 20:08:06.637 > [DPL::announceStatus] waiting for sufficiently recent power meter reading 20:08:06.755 > [Pylontech] Alarms: 0 0 0 0 0 0 020:08:06.840 > [Pylontech] Warnings: 0 0 0 0 0 0 020:08:06.907 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:08:06.981 > [Pylontech] soc: 71 soh: 10020:08:07.053 > [Pylontech] voltage: 49.649998 current: 0.200000 temperature: 24.00000020:08:07.119 > [Pylontech] chargeStatusBits: 1 1 020:08:07.172 > [Pylontech] Manufacturer: PYLON 20:08:07.286 > PowerMeterClass: TotalPower: 347.99 20:08:07.370 > [DPL::loop] * ENTER ** 20:08:07.420 > [DPL::loop] battery interface enabled, SoC: 71 %, StartTH: 45 %, StopTH: 15 %, SoC age: 1 s, ignore: no 20:08:07.497 > [DPL::getBatteryVoltage] BMS: 49.65 V, MPPT: 49.72 V, inverter: 49.70 V, returning: 49.65V 20:08:07.554 > [DPL::loop] dcVoltage: 49.65 V, loadCorrectedVoltage: 49.65 V, StartTH: 52.00 V, StopTH: 47.00 V 20:08:07.615 > [DPL::loop] StartTH reached: yes, StopTH reached: no, SolarPT enabled, use at night: no 20:08:07.676 > [DPL::calcPowerLimit] battery use allowed, solar power (DC): 0 W 20:08:07.728 > [DPL::calcPowerLimit] target consumption: -5 W, base load: 12 W, power meter does NOT include inverter output 20:08:07.782 > [DPL::calcPowerLimit] power meter value: 347 W, power meter valid: yes, inverter output: 0 W, solar power (AC): 0 W 20:08:07.844 > [DPL::calcPowerLimit] match household consumption with limit of 352 W 20:08:07.908 > [DPL::setNewPowerLimit] input limit: 352 W, min limit: 10 W, max limit: 500 W, hysteresis: 5 W 20:08:08.023 > [DPL::setNewPowerLimit] inverter max: 800 W, inverter is NOT producing, requesting: 352 W, reported: 352 W, diff: 0 W 20:08:08.084 > [DPL::updateInverter] Starting inverter... 20:08:08.142 > TX PowerControl Channel: 3 --> 51 90 53 11 63 90 53 11 63 81 00 00 B0 01 61 20:08:08.204 > [DPL::announceStatus] waiting for a start/stop/restart command to complete 20:08:08.260 > Interrupt received 20:08:08.468 > RX Channel: 75 --> D1 90 53 11 63 90 53 11 63 81 00 00 00 00 24 00 74 | -80 dBm 20:08:08.580 > [Pylontech] Alarms: 0 0 0 0 0 0 020:08:08.647 > [Pylontech] Warnings: 0 0 0 0 0 0 020:08:08.700 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:08:08.848 > [Pylontech] soc: 71 soh: 10020:08:08.900 > [Pylontech] voltage: 49.649998 current: 0.200000 temperature: 24.00000020:08:08.966 > [Pylontech] chargeStatusBits: 1 1 020:08:09.047 > [Pylontech] Manufacturer: PYLON 20:08:09.096 > RX Period End 20:08:09.151 > Success 20:08:09.204 > Fetch inverter: 114190531163 20:08:09.296 > TX RealTimeRunData Channel: 23 --> 15 90 53 11 63 90 53 11 63 80 0B 00 66 63 4C 62 00 00 00 00 00 00 00 00 8E AB 90 20:08:09.391 > Interrupt received 20:08:09.501 > RX Channel: 75 --> 95 90 53 11 63 90 53 11 63 01 00 01 01 F0 00 EB 04 8A 01 F1 00 DB 04 3D 00 02 11 | -80 dBm 20:08:09.552 > [Pylontech] Alarms: 0 0 0 0 0 0 020:08:09.618 > [Pylontech] Warnings: 0 0 0 0 0 0 020:08:09.687 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:08:09.738 > [Pylontech] soc: 71 soh: 10020:08:09.816 > [Pylontech] voltage: 49.610001 current: 0.000000 temperature: 24.00000020:08:09.877 > [Pylontech] chargeStatusBits: 1 1 020:08:09.965 > [Pylontech] Manufacturer: PYLON 20:08:10.024 > RX Period End 20:08:10.082 > Last missing 20:08:10.185 > Request retransmit: 2 20:08:10.272 > TX RequestFrame Channel: 40 --> 15 90 53 11 63 90 53 11 63 82 97 20:08:10.328 > Interrupt received 20:08:10.382 > RX Channel: 75 --> 95 90 53 11 63 90 53 11 63 02 E6 DA 00 02 7B DB 00 7B 00 76 09 25 13 89 08 59 E3 | -80 dBm 20:08:10.445 > RX Period End 20:08:10.527 > Last missing 20:08:10.603 > Request retransmit: 3 20:08:10.658 > TX RequestFrame Channel: 61 --> 15 90 53 11 63 90 53 11 63 83 96 20:08:10.731 > Interrupt received 20:08:10.804 > RX Channel: 75 --> 95 90 53 11 63 90 53 11 63 83 00 02 00 5B 03 E8 01 21 00 5B 0B B2 66 | -80 dBm 20:08:10.856 > RX Period End 20:08:10.915 > Success 20:08:10.966 > [DPL::announceStatus] waiting for sufficiently recent power meter reading 20:08:11.407 > [Pylontech] Alarms: 0 0 0 0 0 0 020:08:11.605 > [Pylontech] Warnings: 0 0 0 0 0 0 020:08:11.663 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:08:11.727 > [Pylontech] soc: 71 soh: 10020:08:11.821 > [Pylontech] voltage: 49.549999 current: -6.700000 temperature: 24.00000020:08:11.927 > [Pylontech] chargeStatusBits: 1 1 020:08:12.053 > [Pylontech] Manufacturer: PYLON 20:08:12.122 > [Pylontech] Alarms: 0 0 0 0 0 0 020:08:12.179 > [Pylontech] Warnings: 0 0 0 0 0 0 020:08:12.261 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:08:12.321 > [Pylontech] soc: 71 soh: 10020:08:12.430 > [Pylontech] voltage: 49.529999 current: -7.300000 temperature: 24.00000020:08:12.633 > [Pylontech] chargeStatusBits: 1 1 020:08:12.732 > [Pylontech] Manufacturer: PYLON 20:08:12.785 > Fetch inverter: 114190531163 20:08:12.857 > TX RealTimeRunData Channel: 75 --> 15 90 53 11 63 90 53 11 63 80 0B 00 66 63 4C 67 00 00 00 00 00 00 00 00 DE 94 FA 20:08:12.937 > Interrupt received 20:08:13.000 > RX Channel: 3 --> 95 90 53 11 63 90 53 11 63 01 00 01 01 EF 01 83 07 78 01 EF 01 78 07 43 00 02 57 | -80 dBm 20:08:13.141 > Interrupt received 20:08:13.204 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 02 E6 DA 00 02 7B DC 00 7B 00 77 09 26 13 8A 0E 06 BC | -80 dBm 20:08:13.282 > Interrupt received 20:08:13.348 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 83 00 03 00 99 03 E8 01 22 00 5B 27 FA C2 | -80 dBm 20:08:13.796 > RX Period End 20:08:13.996 > Success 20:08:14.323 > TX AlarmData Channel: 3 --> 15 90 53 11 63 90 53 11 63 80 11 00 66 63 4C 67 00 00 00 00 00 00 00 00 04 8F 21 20:08:14.442 > [Pylontech] Alarms: 0 0 0 0 0 0 020:08:14.545 > [Pylontech] Warnings: 0 0 0 0 0 0 020:08:14.600 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:08:14.656 > [Pylontech] soc: 71 soh: 10020:08:14.715 > [Pylontech] voltage: 49.520000 current: -7.300000 temperature: 24.00000020:08:14.771 > [Pylontech] chargeStatusBits: 1 1 020:08:14.903 > RX Period End 20:08:14.965 > All missing 20:08:15.017 > Nothing received, resend whole request 20:08:15.076 > TX AlarmData Channel: 23 --> 15 90 53 11 63 90 53 11 63 80 11 00 66 63 4C 67 00 00 00 00 00 00 00 00 04 8F 21 20:08:15.185 > RX Period End 20:08:15.668 > All missing 20:08:15.797 > Nothing received, resend whole request 20:08:15.854 > TX AlarmData Channel: 40 --> 15 90 53 11 63 90 53 11 63 80 11 00 66 63 4C 67 00 00 00 00 00 00 00 00 04 8F 21 20:08:16.156 > Interrupt received 20:08:16.423 > RX Channel: 3 --> 95 90 53 11 63 90 53 11 63 01 00 01 B0 01 00 01 4A 67 4A 67 00 00 00 00 70 7C 29 | -80 dBm 20:08:16.481 > Interrupt received 20:08:16.540 > RX Channel: 3 --> 95 90 53 11 63 90 53 11 63 02 00 3F 54 3A 54 44 00 00 00 00 70 7C 00 41 54 51 9E | -80 dBm 20:08:16.593 > Interrupt received 20:08:16.648 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 03 54 65 00 00 00 00 70 7C 00 43 54 6F 54 7C 00 00 FB | -80 dBm 20:08:16.762 > Interrupt received 20:08:16.820 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 04 00 00 70 7C 00 45 54 86 54 99 00 00 00 00 70 7C CB | -80 dBm 20:08:16.929 > PowerMeterClass: TotalPower: -6.28 20:08:17.042 > [DPL::loop] * ENTER ** 20:08:17.101 > [DPL::loop] battery interface enabled, SoC: 71 %, StartTH: 45 %, StopTH: 15 %, SoC age: 2 s, ignore: no 20:08:17.164 > [DPL::getBatteryVoltage] BMS: 49.52 V, MPPT: 49.48 V, inverter: 49.50 V, returning: 49.52V 20:08:17.223 > [DPL::loop] dcVoltage: 49.52 V, loadCorrectedVoltage: 49.88 V, StartTH: 52.00 V, StopTH: 47.00 V 20:08:17.284 > [DPL::loop] StartTH reached: yes, StopTH reached: no, SolarPT enabled, use at night: no 20:08:17.361 > [DPL::calcPowerLimit] battery use allowed, solar power (DC): 0 W 20:08:17.419 > [DPL::calcPowerLimit] target consumption: -5 W, base load: 12 W, power meter does NOT include inverter output 20:08:17.481 > [DPL::calcPowerLimit] power meter value: -6 W, power meter valid: yes, inverter output: 359 W, solar power (AC): 0 W 20:08:17.535 > [DPL::calcPowerLimit] match household consumption with limit of -1 W 20:08:17.607 > [DPL::setNewPowerLimit] input limit: -1 W, min limit: 10 W, max limit: 500 W, hysteresis: 5 W 20:08:17.752 > [DPL::announceStatus] calculated limit is less than minimum power limit 20:08:17.812 > [DPL::updateInverter] Stopping inverter... 20:08:17.867 > [Pylontech] Alarms: 0 0 0 0 0 0 020:08:17.933 > [Pylontech] Warnings: 0 0 0 0 0 0 020:08:17.989 > RX Period End 20:08:18.173 > Last missing 20:08:18.252 > Request retransmit: 5 20:08:18.374 > TX RequestFrame Channel: 61 --> 15 90 53 11 63 90 53 11 63 85 90 20:08:18.429 > [DPL::announceStatus] waiting for a start/stop/restart command to complete 20:08:18.499 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:08:18.569 > [Pylontech] soc: 71 soh: 10020:08:18.634 > [Pylontech] voltage: 49.500000 current: -7.300000 temperature: 24.00000020:08:18.691 > [Pylontech] chargeStatusBits: 1 1 020:08:18.772 > RX Period End 20:08:18.878 > Last missing 20:08:18.934 > Request retransmit: 5 20:08:18.988 > TX RequestFrame Channel: 75 --> 15 90 53 11 63 90 53 11 63 85 90 20:08:19.103 > RX Period End 20:08:19.171 > Last missing 20:08:19.227 > Request retransmit: 5 20:08:19.312 > TX RequestFrame Channel: 3 --> 15 90 53 11 63 90 53 11 63 85 90 20:08:19.409 > Interrupt received 20:08:19.493 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 05 00 47 55 15 55 26 00 00 00 00 70 7C 00 49 55 38 CC | -80 dBm 20:08:19.550 > RX Period End 20:08:19.600 > Last missing 20:08:19.657 > Request retransmit: 6 20:08:19.705 > TX RequestFrame Channel: 23 --> 15 90 53 11 63 90 53 11 63 86 93 20:08:19.757 > Interrupt received 20:08:19.903 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 06 55 43 00 00 00 00 70 7C 00 4B 55 4D 55 58 00 00 D7 | -80 dBm 20:08:20.004 > RX Period End 20:08:20.109 > Last missing 20:08:20.167 > Request retransmit: 7 20:08:20.249 > TX RequestFrame Channel: 40 --> 15 90 53 11 63 90 53 11 63 87 92 20:08:20.328 > Interrupt received 20:08:20.388 > RX Channel: 3 --> 95 90 53 11 63 90 53 11 63 07 00 00 70 7C 00 4D 55 63 55 6D 00 00 00 00 70 7C D1 | -80 dBm 20:08:20.442 > RX Period End 20:08:20.504 > Last missing 20:08:20.625 > Retransmit timeout 20:08:20.681 > TX PowerControl Channel: 61 --> 51 90 53 11 63 90 53 11 63 81 01 00 20 00 F1 20:08:20.758 > Interrupt received 20:08:20.943 > RX Channel: 3 --> D1 90 53 11 63 90 53 11 63 81 00 00 01 00 B4 01 E4 | -80 dBm 20:08:21.235 > [Pylontech] Alarms: 0 0 0 0 0 0 020:08:21.309 > [Pylontech] Warnings: 0 0 0 0 0 0 020:08:21.363 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:08:21.546 > [Pylontech] soc: 71 soh: 10020:08:21.638 > [Pylontech] voltage: 49.489998 current: -7.400000 temperature: 24.00000020:08:21.720 > [Pylontech] chargeStatusBits: 1 1 020:08:21.773 > [Pylontech] Manufacturer: PYLON 20:08:21.942 > RX Period End 20:08:22.049 > Success 20:08:22.141 > Fetch inverter: 114190531163 20:08:22.228 > TX RealTimeRunData Channel: 75 --> 15 90 53 11 63 90 53 11 63 80 0B 00 66 63 4C 6D 00 00 00 00 00 00 00 00 7E EA 2E 20:08:22.357 > Interrupt received 20:08:22.484 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 01 00 01 01 F0 00 1B 00 84 01 F1 00 1A 00 7E 00 02 6D | -80 dBm 20:08:22.875 > Interrupt received 20:08:22.940 > RX Channel: 3 --> 95 90 53 11 63 90 53 11 63 02 E6 DA 00 02 7B DC 00 7B 00 77 09 1F 13 89 00 E5 6B | -80 dBm 20:08:23.063 > RX Period End 20:08:23.157 > Last missing 20:08:23.254 > Request retransmit: 3 20:08:23.468 > TX RequestFrame Channel: 3 --> 15 90 53 11 63 90 53 11 63 83 96 20:08:23.531 > Interrupt received 20:08:23.594 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 83 00 00 00 0A 03 E8 01 21 00 5C B6 1B 26 | -80 dBm 20:08:23.648 > RX Period End 20:08:23.792 > Success 20:08:23.859 > [DPL::updateInverter] Stopping inverter... 20:08:23.910 > TX AlarmData Channel: 23 --> 15 90 53 11 63 90 53 11 63 80 11 00 66 63 4C 6D 00 00 00 00 00 00 00 00 A4 F1 F5 20:08:23.997 > [Pylontech] Alarms: 0 0 0 0 0 0 020:08:24.054 > [Pylontech] Warnings: 0 0 0 0 0 0 020:08:24.116 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:08:24.338 > [Pylontech] soc: 71 soh: 10020:08:24.433 > [Pylontech] voltage: 49.559998 current: -4.000000 temperature: 24.00000020:08:24.550 > [Pylontech] chargeStatusBits: 1 1 020:08:24.607 > RX Period End 20:08:24.659 > All missing 20:08:24.716 > Nothing received, resend whole request 20:08:24.783 > TX AlarmData Channel: 40 --> 15 90 53 11 63 90 53 11 63 80 11 00 66 63 4C 6D 00 00 00 00 00 00 00 00 A4 F1 F5 20:08:24.835 > Interrupt received 20:08:24.886 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 02 00 41 54 51 54 65 00 00 00 00 70 7C 00 43 54 6F 96 | -80 dBm 20:08:24.946 > Interrupt received 20:08:25.116 > RX Channel: 3 --> 95 90 53 11 63 90 53 11 63 03 54 7C 00 00 00 00 70 7C 00 45 54 86 54 99 00 00 E8 | -80 dBm 20:08:25.218 > Interrupt received 20:08:25.268 > RX Channel: 40 --> 95 90 53 11 63 90 53 11 63 04 00 00 70 7C 00 47 55 15 55 26 00 00 00 00 70 7C E5 | -80 dBm 20:08:25.320 > Interrupt received 20:08:25.735 > RX Channel: 40 --> 95 90 53 11 63 90 53 11 63 05 00 49 55 38 55 43 00 00 00 00 70 7C 00 4B 55 4D FD | -80 dBm 20:08:26.140 > Interrupt received 20:08:26.200 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 06 55 58 00 00 00 00 70 7C 00 4D 55 63 55 6D 00 00 D1 | -80 dBm 20:08:26.354 > Interrupt received 20:08:26.420 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 07 00 00 70 7C 00 4F 55 78 55 83 00 00 00 00 70 7C 26 | -80 dBm 20:08:26.474 > Interrupt received 20:08:26.797 > RX Channel: 61 --> 95 90 53 11 63 90 53 11 63 8C 56 1F 00 00 00 00 41 01 10 | -80 dBm 20:08:27.000 > RX Channel: 61 --> 95 90 53 11 63 90 53 11 63 8C 56 1F 00 00 00 00 41 01 10 | -80 dBm 20:08:27.208 > RX Channel: 61 --> 95 90 53 11 63 90 53 11 63 8C 56 1F 00 00 00 00 41 01 10 | -80 dBm 20:08:27.266 > RX Period End 20:08:27.331 > Middle missing 20:08:27.448 > Request retransmit: 1 20:08:27.549 > TX RequestFrame Channel: 61 --> 15 90 53 11 63 90 53 11 63 81 94 20:08:27.654 > Interrupt received 20:08:27.721 > RX Channel: 61 --> 95 90 53 11 63 90 53 11 63 01 00 01 B0 01 00 01 4A 67 4A 67 00 00 00 00 70 7C 29 | -80 dBm 20:08:27.988 > RX Period End 20:08:28.048 > Middle missing 20:08:28.105 > Request retransmit: 8 20:08:28.194 > TX RequestFrame Channel: 75 --> 15 90 53 11 63 90 53 11 63 88 9D 20:08:28.244 > RX Period End 20:08:28.302 > Middle missing 20:08:28.369 > Request retransmit: 8 20:08:28.425 > TX RequestFrame Channel: 3 --> 15 90 53 11 63 90 53 11 63 88 9D 20:08:28.485 > Interrupt received 20:08:28.564 > RX Channel: 61 --> 95 90 53 11 63 90 53 11 63 08 00 51 55 8F 55 A7 00 00 00 00 70 7C 00 53 55 AD 43 | -80 dBm 20:08:28.742 > RX Period End 20:08:29.256 > Middle missing 20:08:29.419 > Request retransmit: 9 20:08:29.524 > TX RequestFrame Channel: 23 --> 15 90 53 11 63 90 53 11 63 89 9C 20:08:29.578 > Interrupt received 20:08:29.699 > RX Channel: 40 --> 95 90 53 11 63 90 53 11 63 09 55 BA 00 00 00 00 70 7C 00 55 55 C2 55 CF 00 00 27 | -80 dBm 20:08:29.805 > [Pylontech] Alarms: 0 0 0 0 0 0 020:08:29.911 > [Pylontech] Warnings: 0 0 0 0 0 0 020:08:29.983 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:08:30.135 > RX Period End 20:08:30.209 > Middle missing 20:08:30.261 > Request retransmit: 10 20:08:30.346 > TX RequestFrame Channel: 40 --> 15 90 53 11 63 90 53 11 63 8A 9F 20:08:30.463 > [Pylontech] soc: 71 soh: 10020:08:30.549 > [Pylontech] voltage: 49.599998 current: 0.200000 temperature: 24.00000020:08:30.654 > Interrupt received 20:08:30.704 > [Pylontech] chargeStatusBits: 1 1 020:08:30.764 > RX Channel: 61 --> 95 90 53 11 63 90 53 11 63 0A 00 00 70 7C 00 57 55 D8 55 E3 00 00 00 00 70 7C F3 | -80 dBm 20:08:30.826 > RX Period End 20:08:31.098 > Middle missing 20:08:31.302 > Retransmit timeout 20:08:31.473 > TX PowerControl Channel: 61 --> 51 90 53 11 63 90 53 11 63 81 01 00 20 00 F1 20:08:31.524 > Interrupt received 20:08:31.576 > RX Channel: 75 --> D1 90 53 11 63 90 53 11 63 81 00 00 01 00 B4 01 E4 | -80 dBm 20:08:31.632 > [Pylontech] Alarms: 0 0 0 0 0 0 020:08:31.685 > [Pylontech] Warnings: 0 0 0 0 0 0 020:08:31.741 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:08:31.888 > [Pylontech] soc: 71 soh: 10020:08:31.950 > [Pylontech] voltage: 49.610001 current: 0.200000 temperature: 24.00000020:08:32.085 > [Pylontech] chargeStatusBits: 1 1 020:08:32.137 > [Pylontech] Manufacturer: PYLON 20:08:32.192 > RX Period End 20:08:32.245 > Success 20:08:32.302 > Fetch inverter: 114190531163 20:08:32.365 > TX RealTimeRunData Channel: 75 --> 15 90 53 11 63 90 53 11 63 80 0B 00 66 63 4C 73 00 00 00 00 00 00 00 00 DE 6B 11 20:08:32.424 > Interrupt received 20:08:32.476 > RX Channel: 61 --> 95 90 53 11 63 90 53 11 63 01 00 01 01 F1 00 02 00 0A 01 F2 00 02 00 08 00 02 96 | -80 dBm 20:08:32.537 > Interrupt received 20:08:32.636 > RX Channel: 61 --> 95 90 53 11 63 90 53 11 63 02 E6 DA 00 02 7B DC 00 7B 00 77 09 1B 13 89 00 00 8A | -80 dBm 20:08:32.710 > Interrupt received 20:08:32.795 > RX Channel: 75 --> 95 90 53 11 63 90 53 11 63 83 00 00 00 00 00 00 01 21 00 5C E9 07 84 | -80 dBm 20:08:32.860 > RX Period End 20:08:32.920 > Success 20:08:32.975 > [DPL::announceStatus] waiting for sufficiently recent power meter reading 20:08:33.071 > TX AlarmData Channel: 3 --> 15 90 53 11 63 90 53 11 63 80 11 00 66 63 4C 73 00 00 00 00 00 00 00 00 04 70 CA 20:08:33.139 > Interrupt received 20:08:33.191 > RX Channel: 61 --> 95 90 53 11 63 90 53 11 63 01 00 01 B0 01 00 01 4A 67 4A 67 00 00 00 00 70 7C 29 | -80 dBm 20:08:33.279 > Interrupt received 20:08:33.339 > RX Channel: 75 --> 95 90 53 11 63 90 53 11 63 03 54 7C 00 00 00 00 70 7C 00 45 54 86 54 99 00 00 E8 | -80 dBm 20:08:33.394 > Interrupt received 20:08:33.462 > RX Channel: 75 --> 95 90 53 11 63 90 53 11 63 04 00 00 70 7C 00 47 55 15 55 26 00 00 00 00 70 7C E5 | -80 dBm 20:08:33.622 > Interrupt received 20:08:33.723 > RX Channel: 61 --> 95 90 53 11 63 90 53 11 63 05 00 49 55 38 55 43 00 00 00 00 70 7C 00 4B 55 4D FD | -80 dBm 20:08:33.782 > Interrupt received 20:08:33.844 > RX Channel: 75 --> 95 90 53 11 63 90 53 11 63 06 55 58 00 00 00 00 70 7C 00 4D 55 63 55 6D 00 00 D1 | -80 dBm 20:08:33.920 > Interrupt received 20:08:33.983 > RX Channel: 75 --> 95 90 53 11 63 90 53 11 63 07 00 00 70 7C 00 4F 55 78 55 83 00 00 00 00 70 7C 26 | -80 dBm 20:08:34.043 > Interrupt received 20:08:34.139 > RX Channel: 75 --> 95 90 53 11 63 90 53 11 63 08 00 51 55 8F 55 A7 00 00 00 00 70 7C 00 53 55 AD 43 | -80 dBm 20:08:34.230 > Interrupt received 20:08:34.279 > RX Channel: 61 --> 95 90 53 11 63 90 53 11 63 09 55 BA 00 00 00 00 70 7C 00 55 55 C2 55 CF 00 00 27 | -80 dBm 20:08:34.333 > Interrupt received 20:08:34.392 > RX Channel: 61 --> 95 90 53 11 63 90 53 11 63 0A 00 00 70 7C 00 57 55 D8 55 E3 00 00 00 00 70 7C F3 | -80 dBm 20:08:34.448 > Interrupt received 20:08:34.681 > RX Channel: 3 --> 95 90 53 11 63 90 53 11 63 0B 00 59 55 ED 56 00 00 00 00 00 70 7C 00 5B 56 0B 23 | -80 dBm 20:08:34.787 > Interrupt received 20:08:34.988 > RX Channel: 75 --> 95 90 53 11 63 90 53 11 63 8C 56 1F 00 00 00 00 41 01 10 | -80 dBm 20:08:35.298 > RX Period End 20:08:35.460 > Middle missing 20:08:35.533 > Request retransmit: 2 20:08:35.586 > TX RequestFrame Channel: 23 --> 15 90 53 11 63 90 53 11 63 82 97 20:08:35.810 > RX Period End 20:08:36.116 > Middle missing 20:08:36.333 > Request retransmit: 2 20:08:36.627 > TX RequestFrame Channel: 40 --> 15 90 53 11 63 90 53 11 63 82 97 20:08:36.934 > Interrupt received 20:08:37.107 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 02 00 41 54 51 54 65 00 00 00 00 70 7C 00 43 54 6F 96 | -80 dBm 20:08:37.201 > [Pylontech] Alarms: 0 0 0 0 0 0 020:08:37.259 > [Pylontech] Warnings: 0 0 0 0 0 0 020:08:37.324 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:08:37.397 > PowerMeterClass: TotalPower: 349.86 20:08:37.461 > [Pylontech] soc: 71 soh: 10020:08:37.525 > RX Period End 20:08:37.588 > Success 20:08:37.647 > [Pylontech] voltage: 49.619999 current: 0.200000 temperature: 24.00000020:08:37.707 > [Pylontech] chargeStatusBits: 1 1 020:08:37.828 > [Pylontech] Alarms: 0 0 0 0 0 0 020:08:37.925 > [Pylontech] Warnings: 0 0 0 0 0 0 020:08:38.018 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:08:38.072 > [Pylontech] soc: 71 soh: 10020:08:38.125 > [Pylontech] voltage: 49.629997 current: 0.200000 temperature: 24.00000020:08:38.378 > [Pylontech] chargeStatusBits: 1 1 020:08:38.480 > [Pylontech] Manufacturer: PYLON 20:08:38.544 > Fetch inverter: 114190531163 20:08:38.604 > TX RealTimeRunData Channel: 61 --> 15 90 53 11 63 90 53 11 63 80 0B 00 66 63 4C 78 00 00 00 00 00 00 00 00 EE 18 59 20:08:38.671 > Interrupt received 20:08:38.746 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 01 00 01 01 F1 00 02 00 0A 01 F2 00 02 00 08 00 02 96 | -80 dBm 20:08:38.803 > Interrupt received 20:08:38.941 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 02 E6 DA 00 02 7B DC 00 7B 00 77 09 1D 13 89 00 00 8C | -80 dBm 20:08:39.009 > Interrupt received 20:08:39.065 > RX Channel: 3 --> 95 90 53 11 63 90 53 11 63 83 00 00 00 00 00 00 01 20 00 5C 2B D0 90 | -80 dBm 20:08:39.117 > RX Period End 20:08:39.188 > Success 20:08:39.240 > [Pylontech] Alarms: 0 0 0 0 0 0 020:08:39.309 > [Pylontech] Warnings: 0 0 0 0 0 0 020:08:39.366 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:08:39.430 > [Pylontech] soc: 71 soh: 10020:08:39.487 > [Pylontech] voltage: 49.639999 current: 0.200000 temperature: 24.00000020:08:39.672 > [Pylontech] chargeStatusBits: 1 1 020:08:39.726 > [Pylontech] Alarms: 0 0 0 0 0 0 020:08:39.871 > [Pylontech] Warnings: 0 0 0 0 0 0 020:08:39.921 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:08:40.108 > [Pylontech] soc: 71 soh: 10020:08:40.171 > [Pylontech] voltage: 49.639999 current: 0.200000 temperature: 24.00000020:08:40.255 > [Pylontech] chargeStatusBits: 1 1 020:08:40.315 > [Pylontech] Manufacturer: PYLON 20:08:40.379 > [Pylontech] Alarms: 0 0 0 0 0 0 020:08:40.434 > [Pylontech] Warnings: 0 0 0 0 0 0 020:08:40.488 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:08:40.575 > [Pylontech] soc: 71 soh: 10020:08:40.994 > [Pylontech] voltage: 49.649998 current: 0.200000 temperature: 24.00000020:08:41.083 > [Pylontech] chargeStatusBits: 1 1 020:08:41.148 > Fetch inverter: 114190531163 20:08:41.205 > TX RealTimeRunData Channel: 75 --> 15 90 53 11 63 90 53 11 63 80 0B 00 66 63 4C 7D 00 00 00 00 00 00 00 00 BE 27 33 20:08:41.302 > Interrupt received 20:08:41.501 > RX Channel: 3 --> 95 90 53 11 63 90 53 11 63 01 00 01 01 F1 00 02 00 0A 01 F2 00 02 00 08 00 02 96 | -80 dBm 20:08:41.612 > Interrupt received 20:08:41.852 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 02 E6 DA 00 02 7B DC 00 7B 00 77 09 1C 13 89 00 00 8D | -80 dBm 20:08:42.016 > Interrupt received 20:08:42.072 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 83 00 00 00 00 00 00 01 20 00 5C 2B 11 51 | -80 dBm 20:08:42.146 > [DPL::announceStatus] waiting for sufficiently recent power meter reading 20:08:42.208 > RX Period End 20:08:42.268 > Success 20:08:42.322 > [Pylontech] Alarms: 0 0 0 0 0 0 020:08:42.388 > [Pylontech] Warnings: 0 0 0 0 0 0 020:08:42.456 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:08:42.737 > [Pylontech] soc: 71 soh: 10020:08:42.916 > [Pylontech] voltage: 49.649998 current: 0.200000 temperature: 24.00000020:08:43.036 > [Pylontech] chargeStatusBits: 1 1 020:08:43.132 > [Pylontech] Manufacturer: PYLON 20:08:43.196 > PowerMeterClass: TotalPower: 351.26 20:08:43.309 > [DPL::loop] * ENTER ** 20:08:43.453 > [DPL::loop] battery interface enabled, SoC: 71 %, StartTH: 45 %, StopTH: 15 %, SoC age: 0 s, ignore: no 20:08:43.523 > [DPL::getBatteryVoltage] BMS: 49.65 V, MPPT: 49.74 V, inverter: 49.70 V, returning: 49.65V 20:08:43.581 > [DPL::loop] dcVoltage: 49.65 V, loadCorrectedVoltage: 49.65 V, StartTH: 52.00 V, StopTH: 47.00 V 20:08:43.651 > [DPL::loop] StartTH reached: yes, StopTH reached: no, SolarPT enabled, use at night: no 20:08:43.758 > [DPL::calcPowerLimit] battery use allowed, solar power (DC): 0 W 20:08:43.821 > [DPL::calcPowerLimit] target consumption: -5 W, base load: 12 W, power meter does NOT include inverter output 20:08:43.875 > [DPL::calcPowerLimit] power meter value: 351 W, power meter valid: yes, inverter output: 0 W, solar power (AC): 0 W 20:08:43.946 > [DPL::calcPowerLimit] match household consumption with limit of 356 W 20:08:44.058 > [DPL::setNewPowerLimit] input limit: 356 W, min limit: 10 W, max limit: 500 W, hysteresis: 5 W 20:08:44.118 > [DPL::setNewPowerLimit] inverter max: 800 W, inverter is NOT producing, requesting: 356 W, reported: 352 W, diff: 4 W 20:08:44.170 > [DPL::updateInverter] Starting inverter... 20:08:44.519 > TX PowerControl Channel: 3 --> 51 90 53 11 63 90 53 11 63 81 00 00 B0 01 61 20:08:44.793 > [DPL::announceStatus] waiting for a start/stop/restart command to complete 20:08:45.023 > Interrupt received 20:08:45.307 > RX Channel: 3 --> D1 90 53 11 63 90 53 11 63 81 00 00 00 00 24 00 74 | -80 dBm 20:08:45.391 > [Pylontech] Alarms: 0 0 0 0 0 0 020:08:45.459 > [Pylontech] Warnings: 0 0 0 0 0 0 020:08:45.846 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:08:45.949 > [Pylontech] soc: 71 soh: 10020:08:46.048 > [Pylontech] voltage: 49.660000 current: 0.200000 temperature: 24.00000020:08:46.122 > [Pylontech] chargeStatusBits: 1 1 020:08:46.176 > RX Period End 20:08:46.249 > Success 20:08:46.323 > Fetch inverter: 114190531163 20:08:46.390 > TX RealTimeRunData Channel: 23 --> 15 90 53 11 63 90 53 11 63 80 0B 00 66 63 4C 82 00 00 00 00 00 00 00 00 4A 62 7D 20:08:46.559 > [Pylontech] Alarms: 0 0 0 0 0 0 020:08:47.242 > [Pylontech] Warnings: 0 0 0 0 0 0 020:08:47.794 > RX Period End 20:08:47.956 > All missing 20:08:48.025 > Nothing received, resend whole request 20:08:48.089 > TX RealTimeRunData Channel: 40 --> 15 90 53 11 63 90 53 11 63 80 0B 00 66 63 4C 82 00 00 00 00 00 00 00 00 4A 62 7D 20:08:48.300 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:08:48.351 > [Pylontech] soc: 71 soh: 10020:08:48.412 > [Pylontech] voltage: 49.549999 current: -1.500000 temperature: 24.00000020:08:48.509 > [Pylontech] chargeStatusBits: 1 1 020:08:48.643 > Interrupt received 20:08:48.775 > [Pylontech] Manufacturer: PYLON 20:08:49.093 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 01 00 01 01 EF 01 8C 07 A4 01 F0 01 76 07 3A 00 02 EC | -80 dBm 20:08:49.161 > Interrupt received 20:08:49.301 > RX Channel: 3 --> 95 90 53 11 63 90 53 11 63 02 E6 DA 00 02 7B DC 00 7B 00 77 09 25 13 89 0E 28 92 | -80 dBm 20:08:49.371 > Interrupt received 20:08:49.513 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 83 00 00 00 9B 03 E8 01 20 00 5D 49 C2 91 | -80 dBm 20:08:49.568 > RX Period End 20:08:49.624 > Success 20:08:49.683 > [DPL::announceStatus] waiting for sufficiently recent power meter reading 20:08:49.733 > [Pylontech] Alarms: 0 0 0 0 0 0 020:08:49.782 > [Pylontech] Warnings: 0 0 0 0 0 0 020:08:49.840 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:08:49.909 > [Pylontech] soc: 71 soh: 10020:08:49.958 > [Pylontech] voltage: 49.480000 current: -7.400000 temperature: 24.00000020:08:50.025 > [Pylontech] chargeStatusBits: 1 1 020:08:50.082 > [Pylontech] Alarms: 0 0 0 0 0 0 020:08:50.142 > [Pylontech] Warnings: 0 0 0 0 0 0 020:08:50.200 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:08:50.256 > [Pylontech] soc: 71 soh: 10020:08:50.315 > [Pylontech] voltage: 49.459999 current: -7.400000 temperature: 24.00000020:08:50.371 > [Pylontech] chargeStatusBits: 1 1 020:08:50.427 > [Pylontech] Manufacturer: PYLON 20:08:50.479 > Fetch inverter: 114190531163 20:08:50.535 > TX RealTimeRunData Channel: 61 --> 15 90 53 11 63 90 53 11 63 80 0B 00 66 63 4C 87 00 00 00 00 00 00 00 00 1A 5D 17 20:08:50.598 > Interrupt received 20:08:50.656 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 01 00 01 01 EF 01 88 07 8E 01 EF 01 7D 07 5C 00 02 B0 | -80 dBm 20:08:50.964 > Interrupt received 20:08:51.167 > RX Channel: 3 --> 95 90 53 11 63 90 53 11 63 83 00 00 00 9B 03 E8 01 21 00 5D D9 95 57 | -80 dBm 20:08:51.334 > RX Period End 20:08:51.400 > Middle missing 20:08:51.537 > Request retransmit: 2 20:08:51.601 > TX RequestFrame Channel: 75 --> 15 90 53 11 63 90 53 11 63 82 97 20:08:51.669 > Interrupt received 20:08:51.737 > RX Channel: 3 --> 95 90 53 11 63 90 53 11 63 02 E6 DA 00 02 7B DC 00 7B 00 77 09 27 13 89 0E 32 8A | -80 dBm 20:08:51.809 > RX Period End 20:08:51.871 > Success 20:08:52.193 > TX AlarmData Channel: 3 --> 15 90 53 11 63 90 53 11 63 80 11 00 66 63 4C 87 00 00 00 00 00 00 00 00 C0 46 CC 20:08:52.369 > Interrupt received 20:08:52.459 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 01 00 01 B0 01 00 01 4A 67 4A 67 00 00 00 00 70 7C 29 | -80 dBm 20:08:52.572 > Interrupt received 20:08:52.643 > RX Channel: 40 --> 95 90 53 11 63 90 53 11 63 02 00 41 54 51 54 65 00 00 00 00 70 7C 00 43 54 6F 96 | -80 dBm 20:08:52.722 > Interrupt received 20:08:52.810 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 03 54 7C 00 00 00 00 70 7C 00 45 54 86 54 99 00 00 E8 | -80 dBm 20:08:52.870 > Interrupt received 20:08:53.083 > RX Channel: 40 --> 95 90 53 11 63 90 53 11 63 04 00 00 70 7C 00 47 55 15 55 26 00 00 00 00 70 7C E5 | -80 dBm 20:08:53.180 > Interrupt received 20:08:53.233 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 05 00 49 55 38 55 43 00 00 00 00 70 7C 00 4B 55 4D FD | -80 dBm 20:08:53.523 > Interrupt received 20:08:53.615 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 06 55 58 00 00 00 00 70 7C 00 4D 55 63 55 6D 00 00 D1 | -80 dBm 20:08:53.690 > Interrupt received 20:08:53.746 > RX Channel: 40 --> 95 90 53 11 63 90 53 11 63 07 00 00 70 7C 00 4F 55 78 55 83 00 00 00 00 70 7C 26 | -80 dBm 20:08:53.799 > Interrupt received 20:08:53.863 > RX Channel: 40 --> 95 90 53 11 63 90 53 11 63 08 00 51 55 8F 55 A7 00 00 00 00 70 7C 00 53 55 AD 43 | -80 dBm 20:08:53.911 > Interrupt received 20:08:54.005 > RX Channel: 61 --> 95 90 53 11 63 90 53 11 63 09 55 BA 00 00 00 00 70 7C 00 55 55 C2 55 CF 00 00 27 | -80 dBm 20:08:54.071 > Interrupt received 20:08:54.136 > RX Channel: 40 --> 95 90 53 11 63 90 53 11 63 0A 00 00 70 7C 00 57 55 D8 55 E3 00 00 00 00 70 7C F3 | -80 dBm 20:08:54.649 > Interrupt received 20:08:54.855 > RX Channel: 40 --> 95 90 53 11 63 90 53 11 63 0B 00 59 55 ED 56 00 00 00 00 00 70 7C 00 5B 56 0B 23 | -80 dBm 20:08:55.062 > Interrupt received 20:08:55.264 > RX Channel: 75 --> 95 90 53 11 63 90 53 11 63 8C 56 1F 00 00 00 00 41 01 10 | -80 dBm 20:08:55.571 > RX Period End 20:08:55.775 > Success 20:08:55.980 > [Pylontech] Alarms: 0 0 0 0 0 0 020:08:56.146 > [Pylontech] Warnings: 0 0 0 0 0 0 020:08:56.597 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:08:56.903 > [Pylontech] soc: 71 soh: 10020:08:57.113 > [Pylontech] voltage: 49.450001 current: -7.400000 temperature: 24.00000020:08:57.311 > [Pylontech] chargeStatusBits: 1 1 020:08:57.516 > [Pylontech] Manufacturer: PYLON 20:08:57.721 > PowerMeterClass: TotalPower: -78.73 20:08:57.825 > [DPL::loop] * ENTER ** 20:08:57.940 > [DPL::loop] battery interface enabled, SoC: 71 %, StartTH: 45 %, StopTH: 15 %, SoC age: 1 s, ignore: no 20:08:58.019 > [DPL::getBatteryVoltage] BMS: 49.45 V, MPPT: 49.50 V, inverter: 49.50 V, returning: 49.45V 20:08:58.192 > [DPL::loop] dcVoltage: 49.45 V, loadCorrectedVoltage: 49.81 V, StartTH: 52.00 V, StopTH: 47.00 V 20:08:58.310 > [DPL::loop] StartTH reached: yes, StopTH reached: no, SolarPT enabled, use at night: no 20:08:58.367 > [DPL::calcPowerLimit] battery use allowed, solar power (DC): 0 W 20:08:58.492 > [DPL::calcPowerLimit] target consumption: -5 W, base load: 12 W, power meter does NOT include inverter output 20:08:58.547 > [DPL::calcPowerLimit] power meter value: -78 W, power meter valid: yes, inverter output: 363 W, solar power (AC): 0 W 20:08:58.614 > [DPL::calcPowerLimit] match household consumption with limit of -73 W 20:08:58.708 > [DPL::setNewPowerLimit] input limit: -73 W, min limit: 10 W, max limit: 500 W, hysteresis: 5 W 20:08:58.759 > [DPL::announceStatus] calculated limit is less than minimum power limit 20:08:58.829 > [DPL::updateInverter] Stopping inverter... 20:08:58.932 > TX PowerControl Channel: 23 --> 51 90 53 11 63 90 53 11 63 81 01 00 20 00 F1 20:08:59.052 > [DPL::announceStatus] waiting for a start/stop/restart command to complete 20:08:59.147 > Interrupt received 20:08:59.360 > RX Channel: 61 --> D1 90 53 11 63 90 53 11 63 81 00 00 01 00 B4 01 E4 | -80 dBm 20:08:59.634 > [Pylontech] Alarms: 0 0 0 0 0 0 020:08:59.697 > [Pylontech] Warnings: 0 0 0 0 0 0 020:08:59.752 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:08:59.804 > [Pylontech] soc: 71 soh: 10020:08:59.862 > [Pylontech] voltage: 49.439999 current: -7.400000 temperature: 24.00000020:09:00.033 > [Pylontech] chargeStatusBits: 1 1 020:09:00.098 > RX Period End 20:09:00.154 > Success 20:09:00.214 > Fetch inverter: 114190531163 20:09:00.276 > TX RealTimeRunData Channel: 40 --> 15 90 53 11 63 90 53 11 63 80 0B 00 66 63 4C 8C 00 00 00 00 00 00 00 00 2A 2E 5F 20:09:00.331 > Interrupt received 20:09:00.383 > RX Channel: 61 --> 95 90 53 11 63 90 53 11 63 01 00 01 01 F1 00 02 00 0A 01 F1 00 02 00 08 00 02 95 | -80 dBm 20:09:00.443 > Interrupt received 20:09:00.503 > RX Channel: 61 --> 95 90 53 11 63 90 53 11 63 02 E6 DB 00 02 7B DC 00 7C 00 77 09 1D 13 89 00 00 8A | -80 dBm 20:09:00.556 > [Pylontech] Alarms: 0 0 0 0 0 0 020:09:00.625 > [Pylontech] Warnings: 0 0 0 0 0 0 020:09:00.687 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:09:00.756 > [Pylontech] soc: 71 soh: 10020:09:00.856 > [Pylontech] voltage: 49.549999 current: -6.300000 temperature: 24.00000020:09:01.100 > [Pylontech] chargeStatusBits: 1 1 020:09:01.307 > Interrupt received 20:09:01.516 > RX Channel: 75 --> 95 90 53 11 63 90 53 11 63 83 00 00 00 00 00 00 01 20 00 5E 67 04 0A | -80 dBm 20:09:02.331 > RX Period End 20:09:02.491 > Success 20:09:02.601 > [DPL::announceStatus] waiting for sufficiently recent power meter reading 20:09:02.655 > [Pylontech] Alarms: 0 0 0 0 0 0 020:09:02.712 > [Pylontech] Warnings: 0 0 0 0 0 0 020:09:02.776 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:09:02.828 > [Pylontech] soc: 71 soh: 10020:09:02.911 > [Pylontech] voltage: 49.599998 current: 0.200000 temperature: 24.00000020:09:02.968 > [Pylontech] chargeStatusBits: 1 1 020:09:03.353 > [Pylontech] Alarms: 0 0 0 0 0 0 020:09:03.625 > [Pylontech] Warnings: 0 0 0 0 0 0 020:09:03.842 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:09:03.955 > [Pylontech] soc: 71 soh: 10020:09:04.053 > [Pylontech] voltage: 49.619999 current: 0.200000 temperature: 24.00000020:09:04.170 > [Pylontech] chargeStatusBits: 1 1 020:09:04.220 > [Pylontech] Manufacturer: PYLON 20:09:04.273 > Fetch inverter: 114190531163 20:09:04.331 > TX RealTimeRunData Channel: 61 --> 15 90 53 11 63 90 53 11 63 80 0B 00 66 63 4C 91 00 00 00 00 00 00 00 00 7A BB 87 20:09:04.385 > Interrupt received 20:09:04.442 > RX Channel: 3 --> 95 90 53 11 63 90 53 11 63 01 00 01 01 F1 00 02 00 0A 01 F2 00 02 00 08 00 02 96 | -80 dBm 20:09:04.503 > Interrupt received 20:09:04.558 > RX Channel: 3 --> 95 90 53 11 63 90 53 11 63 02 E6 DB 00 02 7B DC 00 7C 00 77 09 1D 13 89 00 00 8A | -80 dBm 20:09:04.609 > Interrupt received 20:09:04.680 > RX Channel: 3 --> 95 90 53 11 63 90 53 11 63 83 00 00 00 00 00 00 01 1F 00 5E 6B 80 BD | -80 dBm 20:09:04.753 > RX Period End 20:09:04.813 > Success 20:09:04.877 > TX AlarmData Channel: 75 --> 15 90 53 11 63 90 53 11 63 80 11 00 66 63 4C 91 00 00 00 00 00 00 00 00 A0 A0 5C 20:09:05.097 > Interrupt received 20:09:05.299 > RX Channel: 75 --> 95 90 53 11 63 90 53 11 63 01 00 01 B0 01 00 01 4A 67 4A 67 00 00 00 00 70 7C 29 | -80 dBm 20:09:05.611 > Interrupt received 20:09:06.119 > RX Channel: 3 --> 95 90 53 11 63 90 53 11 63 02 00 43 54 6F 54 7C 00 00 00 00 70 7C 00 45 54 86 5C | -80 dBm 20:09:06.426 > Interrupt received 20:09:06.732 > RX Channel: 3 --> 95 90 53 11 63 90 53 11 63 03 54 99 00 00 00 00 70 7C 00 47 55 15 55 26 00 00 23 | -80 dBm 20:09:06.937 > Interrupt received 20:09:07.949 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 04 00 00 70 7C 00 49 55 38 55 43 00 00 00 00 70 7C A3 | -80 dBm 20:09:08.010 > Interrupt received 20:09:08.072 > RX Channel: 3 --> 95 90 53 11 63 90 53 11 63 05 00 4B 55 4D 55 58 00 00 00 00 70 7C 00 4D 55 63 B9 | -80 dBm 20:09:08.243 > Interrupt received 20:09:08.341 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 06 55 6D 00 00 00 00 70 7C 00 4F 55 78 55 83 00 00 13 | -80 dBm 20:09:08.451 > Interrupt received 20:09:08.585 > RX Channel: 40 --> 95 90 53 11 63 90 53 11 63 09 55 CF 00 00 00 00 70 7C 00 57 55 D8 55 E3 00 00 66 | -80 dBm 20:09:08.651 > Interrupt received 20:09:08.707 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 0A 00 00 70 7C 00 59 55 ED 56 00 00 00 00 00 70 7C 28 | -80 dBm 20:09:08.863 > Interrupt received 20:09:08.915 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 0B 00 5B 56 0B 56 1F 00 00 00 00 70 7C 00 5D 56 2A FC | -80 dBm 20:09:08.971 > Interrupt received 20:09:09.043 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 8C 56 3E 00 00 00 00 F9 01 89 | -80 dBm 20:09:09.156 > [Pylontech] Alarms: 0 0 0 0 0 0 020:09:09.265 > [Pylontech] Warnings: 0 0 0 0 0 0 020:09:09.331 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:09:09.386 > [Pylontech] soc: 71 soh: 10020:09:09.446 > [Pylontech] voltage: 49.629997 current: 0.200000 temperature: 24.00000020:09:09.511 > [Pylontech] chargeStatusBits: 1 1 020:09:09.595 > [Pylontech] Manufacturer: PYLON 20:09:09.668 > RX Period End 20:09:09.727 > Middle missing 20:09:09.783 > Request retransmit: 7 20:09:09.838 > TX RequestFrame Channel: 3 --> 15 90 53 11 63 90 53 11 63 87 92 20:09:09.905 > RX Period End 20:09:09.965 > Middle missing 20:09:10.034 > Request retransmit: 7 20:09:10.090 > TX RequestFrame Channel: 23 --> 15 90 53 11 63 90 53 11 63 87 92 20:09:10.143 > Interrupt received 20:09:10.236 > RX Channel: 40 --> 95 90 53 11 63 90 53 11 63 07 00 00 70 7C 00 51 55 8F 55 A7 00 00 00 00 70 7C EB | -80 dBm 20:09:10.286 > RX Period End 20:09:10.357 > Middle missing 20:09:10.501 > Request retransmit: 8 20:09:10.852 > TX RequestFrame Channel: 40 --> 15 90 53 11 63 90 53 11 63 88 9D 20:09:11.251 > Interrupt received 20:09:11.421 > RX Channel: 40 --> 95 90 53 11 63 90 53 11 63 08 00 53 55 AD 55 BA 00 00 00 00 70 7C 00 55 55 C2 17 | -80 dBm 20:09:11.528 > RX Period End 20:09:11.637 > Success 20:09:11.693 > PowerMeterClass: TotalPower: 280.11 20:09:12.340 > [DPL::loop] * ENTER ** 20:09:12.447 > [DPL::loop] battery interface enabled, SoC: 71 %, StartTH: 45 %, StopTH: 15 %, SoC age: 1 s, ignore: no 20:09:12.519 > [DPL::getBatteryVoltage] BMS: 49.63 V, MPPT: 49.72 V, inverter: 49.70 V, returning: 49.63V 20:09:12.657 > [DPL::loop] dcVoltage: 49.63 V, loadCorrectedVoltage: 49.63 V, StartTH: 52.00 V, StopTH: 47.00 V 20:09:12.723 > [DPL::loop] StartTH reached: yes, StopTH reached: no, SolarPT enabled, use at night: no 20:09:12.782 > [DPL::calcPowerLimit] battery use allowed, solar power (DC): 0 W 20:09:13.098 > [DPL::calcPowerLimit] target consumption: -5 W, base load: 12 W, power meter does NOT include inverter output 20:09:13.288 > [DPL::calcPowerLimit] power meter value: 280 W, power meter valid: yes, inverter output: 0 W, solar power (AC): 0 W 20:09:13.374 > [DPL::calcPowerLimit] match household consumption with limit of 285 W 20:09:13.459 > [DPL::setNewPowerLimit] input limit: 285 W, min limit: 10 W, max limit: 500 W, hysteresis: 5 W 20:09:13.514 > [DPL::setNewPowerLimit] inverter max: 800 W, inverter is NOT producing, requesting: 285 W, reported: 352 W, diff: 67 W 20:09:13.668 > [DPL::updateInverter] sending limit of 35.6 % (285 W respectively), max output is 800 W 20:09:13.916 > TX ActivePowerControl Channel: 61 --> 51 90 53 11 63 90 53 11 63 81 0B 00 01 64 00 01 83 80 BC 20:09:14.057 > [DPL::announceStatus] waiting for a power limit command to complete 20:09:14.107 > Interrupt received 20:09:14.212 > RX Channel: 23 --> D1 90 53 11 63 90 53 11 63 81 00 00 0B 00 14 07 48 | -80 dBm 20:09:14.312 > [Pylontech] Alarms: 0 0 0 0 0 0 020:09:14.428 > [Pylontech] Warnings: 0 0 0 0 0 0 020:09:14.484 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:09:14.539 > [Pylontech] soc: 71 soh: 10020:09:14.602 > [Pylontech] voltage: 49.639999 current: 0.200000 temperature: 24.00000020:09:14.660 > [Pylontech] chargeStatusBits: 1 1 020:09:14.725 > [Pylontech] Manufacturer: PYLON 20:09:14.913 > RX Period End 20:09:14.980 > Success 20:09:15.030 > Fetch inverter: 114190531163 20:09:15.095 > [DPL::updateInverter] actual limit is 35.0 % (280 W respectively), effective 2294 ms after update started, requested were 35.6 % 20:09:15.161 > [DPL::updateInverter] Starting inverter... 20:09:15.225 > TX RealTimeRunData Channel: 75 --> 15 90 53 11 63 90 53 11 63 80 0B 00 66 63 4C 96 00 00 00 00 00 00 00 00 4A 9D 96 20:09:15.450 > [DPL::announceStatus] waiting for a start/stop/restart command to complete 20:09:15.714 > [Pylontech] Alarms: 0 0 0 0 0 0 020:09:15.818 > [Pylontech] Warnings: 0 0 0 0 0 0 020:09:15.872 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:09:15.925 > [Pylontech] soc: 71 soh: 10020:09:16.001 > [Pylontech] voltage: 49.639999 current: 0.200000 temperature: 24.00000020:09:16.061 > [Pylontech] chargeStatusBits: 1 1 020:09:16.126 > Interrupt received 20:09:16.182 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 83 00 00 00 00 00 00 01 1F 00 5E E4 D5 67 | -80 dBm 20:09:16.239 > RX Period End 20:09:16.293 > Middle missing 20:09:16.347 > Request retransmit: 1 20:09:16.400 > TX RequestFrame Channel: 3 --> 15 90 53 11 63 90 53 11 63 81 94 20:09:16.546 > Interrupt received 20:09:16.597 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 01 00 01 01 F1 00 02 00 0A 01 F2 00 02 00 08 00 02 96 | -80 dBm 20:09:16.650 > RX Period End 20:09:16.708 > Middle missing 20:09:16.766 > Request retransmit: 2 20:09:16.823 > TX RequestFrame Channel: 23 --> 15 90 53 11 63 90 53 11 63 82 97 20:09:16.880 > Interrupt received 20:09:16.935 > RX Channel: 40 --> 95 90 53 11 63 90 53 11 63 02 E6 DB 00 02 7B DC 00 7C 00 77 09 1E 13 87 00 00 87 | -80 dBm 20:09:16.990 > RX Period End 20:09:17.149 > Success 20:09:17.210 > TX PowerControl Channel: 40 --> 51 90 53 11 63 90 53 11 63 81 00 00 B0 01 61 20:09:17.285 > Interrupt received 20:09:17.499 > RX Channel: 40 --> D1 90 53 11 63 90 53 11 63 81 00 00 00 00 24 00 74 | -80 dBm 20:09:17.910 > [Pylontech] Alarms: 0 0 0 0 0 0 020:09:18.215 > [Pylontech] Warnings: 0 0 0 0 0 0 020:09:18.303 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:09:18.393 > [Pylontech] soc: 71 soh: 10020:09:18.517 > [Pylontech] voltage: 49.649998 current: 0.200000 temperature: 24.00000020:09:18.572 > [Pylontech] chargeStatusBits: 1 1 020:09:18.621 > [Pylontech] Manufacturer: PYLON 20:09:18.832 > RX Period End 20:09:18.991 > Success 20:09:19.067 > [Pylontech] Alarms: 0 0 0 0 0 0 020:09:19.124 > [Pylontech] Warnings: 0 0 0 0 0 0 020:09:19.184 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:09:19.260 > [Pylontech] soc: 71 soh: 10020:09:19.309 > [Pylontech] voltage: 49.559998 current: -1.400000 temperature: 24.00000020:09:19.400 > [Pylontech] chargeStatusBits: 1 1 020:09:19.509 > [Pylontech] Manufacturer: PYLON 20:09:19.625 > Fetch inverter: 114190531163 20:09:19.676 > TX RealTimeRunData Channel: 61 --> 15 90 53 11 63 90 53 11 63 80 0B 00 66 63 4C 9B 00 00 00 00 00 00 00 00 DA C5 53 20:09:19.816 > Interrupt received 20:09:19.869 > RX Channel: 40 --> 95 90 53 11 63 90 53 11 63 83 00 03 00 7E 03 E8 01 20 00 5F F6 46 4E | -80 dBm 20:09:19.921 > RX Period End 20:09:19.977 > Middle missing 20:09:20.046 > Request retransmit: 1 20:09:20.100 > TX RequestFrame Channel: 75 --> 15 90 53 11 63 90 53 11 63 81 94 20:09:20.159 > Interrupt received 20:09:20.214 > RX Channel: 40 --> 95 90 53 11 63 90 53 11 63 01 00 01 01 EF 01 3F 06 2A 01 F0 01 31 05 E4 00 02 4B | -80 dBm 20:09:20.466 > RX Period End 20:09:20.774 > Middle missing 20:09:21.103 > Request retransmit: 2 20:09:21.244 > TX RequestFrame Channel: 3 --> 15 90 53 11 63 90 53 11 63 82 97 20:09:21.297 > Interrupt received 20:09:21.363 > RX Channel: 40 --> 95 90 53 11 63 90 53 11 63 02 E6 DB 00 02 7B DC 00 7C 00 77 09 26 13 87 0B 7A CE | -80 dBm 20:09:21.430 > RX Period End 20:09:21.552 > Success 20:09:21.669 > [DPL::announceStatus] waiting for sufficiently recent power meter reading 20:09:21.723 > [Pylontech] Alarms: 0 0 0 0 0 0 020:09:21.863 > [Pylontech] Warnings: 0 0 0 0 0 0 020:09:21.917 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:09:21.970 > [Pylontech] soc: 71 soh: 10020:09:22.033 > [Pylontech] voltage: 49.520000 current: -6.000000 temperature: 24.00000020:09:22.278 > [Pylontech] chargeStatusBits: 1 1 020:09:22.365 > PowerMeterClass: TotalPower: -5.69 20:09:22.418 > [DPL::loop] * ENTER ** 20:09:22.489 > [DPL::loop] battery interface enabled, SoC: 71 %, StartTH: 45 %, StopTH: 15 %, SoC age: 2 s, ignore: no 20:09:22.684 > [DPL::getBatteryVoltage] BMS: 49.52 V, MPPT: 49.55 V, inverter: 49.50 V, returning: 49.52V 20:09:22.734 > [DPL::loop] dcVoltage: 49.52 V, loadCorrectedVoltage: 49.81 V, StartTH: 52.00 V, StopTH: 47.00 V 20:09:22.893 > [DPL::loop] StartTH reached: yes, StopTH reached: no, SolarPT enabled, use at night: no 20:09:22.945 > [DPL::calcPowerLimit] battery use allowed, solar power (DC): 0 W 20:09:23.014 > [DPL::calcPowerLimit] target consumption: -5 W, base load: 12 W, power meter does NOT include inverter output 20:09:23.069 > [DPL::calcPowerLimit] power meter value: -5 W, power meter valid: yes, inverter output: 293 W, solar power (AC): 0 W 20:09:23.123 > [DPL::calcPowerLimit] match household consumption with limit of 0 W 20:09:23.190 > [DPL::setNewPowerLimit] input limit: 0 W, min limit: 10 W, max limit: 500 W, hysteresis: 5 W 20:09:23.299 > [DPL::announceStatus] calculated limit is less than minimum power limit 20:09:23.353 > [DPL::updateInverter] Stopping inverter... 20:09:23.407 > [Pylontech] Alarms: 0 0 0 0 0 0 020:09:23.463 > [Pylontech] Warnings: 0 0 0 0 0 0 020:09:23.528 > TX PowerControl Channel: 23 --> 51 90 53 11 63 90 53 11 63 81 01 00 20 00 F1 20:09:23.588 > [DPL::announceStatus] waiting for a start/stop/restart command to complete 20:09:23.650 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:09:23.732 > [Pylontech] soc: 71 soh: 10020:09:23.834 > [Pylontech] voltage: 49.500000 current: -5.800000 temperature: 24.00000020:09:23.887 > [Pylontech] chargeStatusBits: 1 1 020:09:23.941 > [Pylontech] Alarms: 0 0 0 0 0 0 020:09:24.002 > [Pylontech] Warnings: 0 0 0 0 0 0 020:09:24.054 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:09:24.109 > [Pylontech] soc: 71 soh: 10020:09:24.215 > [Pylontech] voltage: 49.489998 current: -5.700000 temperature: 24.00000020:09:24.270 > [Pylontech] chargeStatusBits: 1 1 020:09:24.564 > [Pylontech] Manufacturer: PYLON 20:09:24.663 > RX Period End 20:09:24.760 > All missing 20:09:24.808 > Nothing received, resend whole request 20:09:24.880 > TX PowerControl Channel: 40 --> 51 90 53 11 63 90 53 11 63 81 01 00 20 00 F1 20:09:24.939 > Interrupt received 20:09:24.992 > RX Channel: 40 --> D1 90 53 11 63 90 53 11 63 81 00 00 01 00 B4 01 E4 | -80 dBm 20:09:25.041 > [Pylontech] Alarms: 0 0 0 0 0 0 020:09:25.154 > [Pylontech] Warnings: 0 0 0 0 0 0 020:09:25.484 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:09:25.698 > [Pylontech] soc: 71 soh: 10020:09:25.897 > [Pylontech] voltage: 49.480000 current: -5.800000 temperature: 24.00000020:09:26.100 > [Pylontech] chargeStatusBits: 1 1 020:09:26.311 > RX Period End 20:09:26.465 > Success 20:09:26.569 > Fetch inverter: 114190531163 20:09:26.620 > TX RealTimeRunData Channel: 61 --> 15 90 53 11 63 90 53 11 63 80 0B 00 66 63 4C A3 00 00 00 00 00 00 00 00 1B F6 99 20:09:26.677 > Interrupt received 20:09:26.772 > RX Channel: 40 --> 95 90 53 11 63 90 53 11 63 01 00 01 01 F1 00 02 00 0A 01 F2 00 02 00 08 00 02 96 | -80 dBm 20:09:26.831 > Interrupt received 20:09:26.891 > RX Channel: 61 --> 95 90 53 11 63 90 53 11 63 02 E6 DB 00 02 7B DD 00 7C 00 78 09 20 13 88 00 00 B8 | -80 dBm 20:09:26.975 > Interrupt received 20:09:27.028 > RX Channel: 75 --> 95 90 53 11 63 90 53 11 63 83 00 00 00 00 00 00 01 20 00 60 05 EB B9 | -80 dBm 20:09:27.095 > RX Period End 20:09:27.192 > Success 20:09:27.433 > [DPL::announceStatus] waiting for sufficiently recent power meter reading 20:09:27.594 > TX AlarmData Channel: 75 --> 15 90 53 11 63 90 53 11 63 80 11 00 66 63 4C A3 00 00 00 00 00 00 00 00 C1 ED 42 20:09:27.647 > Interrupt received 20:09:27.702 > RX Channel: 61 --> 95 90 53 11 63 90 53 11 63 01 00 01 B0 01 00 01 4A 67 4A 67 00 00 00 00 70 7C 29 | -80 dBm 20:09:28.010 > Interrupt received 20:09:28.122 > RX Channel: 75 --> 95 90 53 11 63 90 53 11 63 02 00 45 54 86 54 99 00 00 00 00 70 7C 00 47 55 15 C6 | -80 dBm 20:09:28.187 > Interrupt received 20:09:28.240 > RX Channel: 75 --> 95 90 53 11 63 90 53 11 63 03 55 26 00 00 00 00 70 7C 00 49 55 38 55 43 00 00 DB | -80 dBm 20:09:28.319 > Interrupt received 20:09:28.380 > Interrupt received 20:09:28.435 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 08 00 55 55 C2 55 CF 00 00 00 00 70 7C 00 57 55 D8 13 | -80 dBm 20:09:28.523 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 08 00 55 55 C2 55 CF 00 00 00 00 70 7C 00 57 55 D8 13 | -80 dBm 20:09:28.580 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 08 00 55 55 C2 55 CF 00 00 00 00 70 7C 00 57 55 D8 13 | -80 dBm 20:09:28.699 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 08 00 55 55 C2 55 CF 00 00 00 00 70 7C 00 57 55 D8 13 | -80 dBm 20:09:28.788 > Interrupt received 20:09:28.881 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 0A 00 00 70 7C 00 5B 56 0B 56 1F 00 00 00 00 70 7C D0 | -80 dBm 20:09:28.938 > Interrupt received 20:09:28.999 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 0B 00 5D 56 2A 56 3E 00 00 00 00 70 7C 00 5F 56 49 9B | -80 dBm 20:09:29.140 > Interrupt received 20:09:29.212 > RX Channel: 3 --> 95 90 53 11 63 90 53 11 63 8C 56 56 00 00 00 00 CE B3 64 | -80 dBm 20:09:29.265 > [Pylontech] Alarms: 0 0 0 0 0 0 020:09:29.484 > [Pylontech] Warnings: 0 0 0 0 0 0 020:09:29.541 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:09:29.643 > RX Period End 20:09:29.768 > Middle missing 20:09:29.881 > Request retransmit: 4 20:09:30.094 > TX RequestFrame Channel: 3 --> 15 90 53 11 63 90 53 11 63 84 91 20:09:30.161 > [Pylontech] soc: 71 soh: 10020:09:30.254 > [Pylontech] voltage: 49.579998 current: -2.800000 temperature: 24.00000020:09:30.315 > Interrupt received 20:09:30.382 > [Pylontech] chargeStatusBits: 1 1 020:09:30.487 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 04 00 00 70 7C 00 4B 55 4D 55 58 00 00 00 00 70 7C CF | -80 dBm 20:09:30.543 > RX Period End 20:09:30.676 > Middle missing 20:09:30.730 > Request retransmit: 5 20:09:30.788 > TX RequestFrame Channel: 23 --> 15 90 53 11 63 90 53 11 63 85 90 20:09:30.995 > Interrupt received 20:09:31.060 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 05 00 4D 55 63 55 6D 00 00 00 00 70 7C 00 4F 55 78 BD | -80 dBm 20:09:31.124 > RX Period End 20:09:31.527 > Middle missing 20:09:31.711 > Request retransmit: 6 20:09:31.773 > TX RequestFrame Channel: 40 --> 15 90 53 11 63 90 53 11 63 86 93 20:09:31.838 > Interrupt received 20:09:31.888 > RX Channel: 3 --> 95 90 53 11 63 90 53 11 63 06 55 83 00 00 00 00 70 7C 00 51 55 8F 55 A7 00 00 30 | -80 dBm 20:09:31.947 > RX Period End 20:09:32.021 > Middle missing 20:09:32.073 > Request retransmit: 7 20:09:32.243 > TX RequestFrame Channel: 61 --> 15 90 53 11 63 90 53 11 63 87 92 20:09:32.447 > Interrupt received 20:09:32.652 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 07 00 00 70 7C 00 53 55 AD 55 BA 00 00 00 00 70 7C D6 | -80 dBm 20:09:32.864 > RX Period End 20:09:33.026 > Middle missing 20:09:33.086 > Request retransmit: 9 20:09:33.141 > TX RequestFrame Channel: 75 --> 15 90 53 11 63 90 53 11 63 89 9C 20:09:33.244 > Interrupt received 20:09:33.315 > RX Channel: 40 --> 95 90 53 11 63 90 53 11 63 09 55 E3 00 00 00 00 70 7C 00 59 55 ED 56 00 00 00 91 | -80 dBm 20:09:33.369 > RX Period End 20:09:33.425 > Success 20:09:33.479 > [Pylontech] Alarms: 0 0 0 0 0 0 020:09:33.530 > [Pylontech] Warnings: 0 0 0 0 0 0 020:09:33.589 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:09:33.696 > [Pylontech] soc: 71 soh: 10020:09:33.764 > [Pylontech] voltage: 49.619999 current: 0.200000 temperature: 24.10000020:09:33.844 > [Pylontech] chargeStatusBits: 1 1 020:09:33.967 > [Pylontech] Manufacturer: PYLON 20:09:34.023 > Fetch inverter: 114190531163 20:09:34.087 > TX RealTimeRunData Channel: 3 --> 15 90 53 11 63 90 53 11 63 80 0B 00 66 63 4C A8 00 00 00 00 00 00 00 00 2B 85 D1 20:09:34.254 > Interrupt received 20:09:34.347 > RX Channel: 40 --> 95 90 53 11 63 90 53 11 63 01 00 01 01 F1 00 02 00 0A 01 F2 00 02 00 08 00 02 96 | -80 dBm 20:09:34.404 > Interrupt received 20:09:34.478 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 02 E6 DB 00 02 7B DD 00 7C 00 78 09 1E 13 88 00 00 86 | -80 dBm 20:09:34.566 > [Pylontech] Alarms: 0 0 0 0 0 0 020:09:34.669 > [Pylontech] Warnings: 0 0 0 0 0 0 020:09:34.746 > Interrupt received 20:09:34.840 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:09:34.934 > RX Channel: 40 --> 95 90 53 11 63 90 53 11 63 83 00 00 00 00 00 00 01 1F 00 60 19 65 14 | -80 dBm 20:09:35.421 > [Pylontech] soc: 71 soh: 10020:09:35.623 > [Pylontech] voltage: 49.639999 current: 0.200000 temperature: 24.00000020:09:35.799 > [Pylontech] chargeStatusBits: 1 1 020:09:35.861 > PowerMeterClass: TotalPower: 283.23 20:09:35.932 > [DPL::loop] * ENTER ** 20:09:35.992 > [DPL::loop] battery interface enabled, SoC: 71 %, StartTH: 45 %, StopTH: 15 %, SoC age: 0 s, ignore: no 20:09:36.100 > [DPL::getBatteryVoltage] BMS: 49.64 V, MPPT: 49.72 V, inverter: 49.70 V, returning: 49.64V 20:09:36.154 > [DPL::loop] dcVoltage: 49.64 V, loadCorrectedVoltage: 49.64 V, StartTH: 52.00 V, StopTH: 47.00 V 20:09:36.224 > [DPL::loop] StartTH reached: yes, StopTH reached: no, SolarPT enabled, use at night: no 20:09:36.442 > [DPL::calcPowerLimit] battery use allowed, solar power (DC): 0 W 20:09:36.751 > [DPL::calcPowerLimit] target consumption: -5 W, base load: 12 W, power meter does NOT include inverter output 20:09:36.942 > [DPL::calcPowerLimit] power meter value: 283 W, power meter valid: yes, inverter output: 0 W, solar power (AC): 0 W 20:09:37.001 > [DPL::calcPowerLimit] match household consumption with limit of 288 W 20:09:37.118 > [DPL::setNewPowerLimit] input limit: 288 W, min limit: 10 W, max limit: 500 W, hysteresis: 5 W 20:09:37.186 > [DPL::setNewPowerLimit] inverter max: 800 W, inverter is NOT producing, requesting: 288 W, reported: 280 W, diff: 8 W 20:09:37.243 > [DPL::updateInverter] sending limit of 36.0 % (288 W respectively), max output is 800 W 20:09:37.338 > RX Period End 20:09:37.412 > Success 20:09:37.468 > [DPL::announceStatus] waiting for a power limit command to complete 20:09:37.537 > TX AlarmData Channel: 23 --> 15 90 53 11 63 90 53 11 63 80 11 00 66 63 4C A8 00 00 00 00 00 00 00 00 F1 9E 0A 20:09:37.591 > Interrupt received 20:09:37.652 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 01 00 01 B0 01 00 01 4A 67 4A 67 00 00 00 00 70 7C 29 | -80 dBm 20:09:37.739 > Interrupt received 20:09:37.949 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 02 00 45 54 86 54 99 00 00 00 00 70 7C 00 47 55 15 C6 | -80 dBm 20:09:38.004 > Interrupt received 20:09:38.149 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 03 55 26 00 00 00 00 70 7C 00 49 55 38 55 43 00 00 DB | -80 dBm 20:09:38.212 > Interrupt received 20:09:38.263 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 04 00 00 70 7C 00 4B 55 4D 55 58 00 00 00 00 70 7C CF | -80 dBm 20:09:38.559 > Interrupt received 20:09:38.662 > RX Channel: 40 --> 95 90 53 11 63 90 53 11 63 05 00 4D 55 63 55 6D 00 00 00 00 70 7C 00 4F 55 78 BD | -80 dBm 20:09:38.746 > Interrupt received 20:09:38.846 > RX Channel: 40 --> 95 90 53 11 63 90 53 11 63 06 55 83 00 00 00 00 70 7C 00 51 55 8F 55 A7 00 00 30 | -80 dBm 20:09:38.971 > Interrupt received 20:09:39.043 > RX Channel: 40 --> 95 90 53 11 63 90 53 11 63 07 00 00 70 7C 00 53 55 AD 55 BA 00 00 00 00 70 7C D6 | -80 dBm 20:09:39.115 > Interrupt received 20:09:39.435 > RX Channel: 61 --> 95 90 53 11 63 90 53 11 63 08 00 55 55 C2 55 CF 00 00 00 00 70 7C 00 57 55 D8 13 | -80 dBm 20:09:39.616 > Interrupt received 20:09:39.926 > RX Channel: 40 --> 95 90 53 11 63 90 53 11 63 09 55 E3 00 00 00 00 70 7C 00 59 55 ED 56 00 00 00 91 | -80 dBm 20:09:40.001 > Interrupt received 20:09:40.079 > RX Channel: 40 --> 95 90 53 11 63 90 53 11 63 0A 00 00 70 7C 00 5B 56 0B 56 1F 00 00 00 00 70 7C D0 | -80 dBm 20:09:40.186 > Interrupt received 20:09:40.278 > RX Channel: 40 --> 95 90 53 11 63 90 53 11 63 8C 56 56 00 00 00 00 CE B3 64 | -80 dBm 20:09:40.373 > RX Period End 20:09:40.431 > Middle missing 20:09:40.488 > Request retransmit: 11 20:09:40.615 > TX RequestFrame Channel: 40 --> 15 90 53 11 63 90 53 11 63 8B 9E 20:09:40.670 > Interrupt received 20:09:40.949 > RX Channel: 61 --> 95 90 53 11 63 90 53 11 63 0B 00 5D 56 2A 56 3E 00 00 00 00 70 7C 00 5F 56 49 9B | -80 dBm 20:09:41.108 > RX Period End 20:09:41.165 > Success 20:09:41.230 > TX ActivePowerControl Channel: 61 --> 51 90 53 11 63 90 53 11 63 81 0B 00 01 68 00 01 80 40 73 20:09:41.286 > [Pylontech] Alarms: 0 0 0 0 0 0 020:09:41.344 > [Pylontech] Warnings: 0 0 0 0 0 0 020:09:41.401 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:09:41.476 > Interrupt received 20:09:41.664 > [Pylontech] soc: 71 soh: 10020:09:41.831 > RX Channel: 61 --> D1 90 53 11 63 90 53 11 63 81 00 00 0B 00 14 07 48 | -80 dBm 20:09:41.883 > [Pylontech] voltage: 49.639999 current: 0.000000 temperature: 24.00000020:09:41.955 > [Pylontech] chargeStatusBits: 1 1 020:09:42.025 > [Pylontech] Manufacturer: PYLON 20:09:42.081 > RX Period End 20:09:42.442 > Success 20:09:42.502 > [DPL::updateInverter] actual limit is 36.0 % (288 W respectively), effective 3250 ms after update started, requested were 36.0 % 20:09:42.642 > [DPL::updateInverter] Starting inverter... 20:09:42.695 > [Pylontech] Alarms: 0 0 0 0 0 0 020:09:42.746 > [Pylontech] Warnings: 0 0 0 0 0 0 020:09:42.802 > TX PowerControl Channel: 75 --> 51 90 53 11 63 90 53 11 63 81 00 00 B0 01 61 20:09:42.866 > [DPL::announceStatus] waiting for a start/stop/restart command to complete 20:09:42.952 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:09:43.006 > [Pylontech] soc: 71 soh: 10020:09:43.203 > [Pylontech] voltage: 49.649998 current: 0.000000 temperature: 24.00000020:09:43.384 > [Pylontech] chargeStatusBits: 1 1 020:09:43.447 > RX Period End 20:09:43.501 > All missing 20:09:43.581 > Nothing received, resend whole request 20:09:43.641 > TX PowerControl Channel: 3 --> 51 90 53 11 63 90 53 11 63 81 00 00 B0 01 61 20:09:43.701 > [Pylontech] Alarms: 0 0 0 0 0 0 020:09:43.751 > [Pylontech] Warnings: 0 0 0 0 0 0 020:09:43.873 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:09:43.926 > [Pylontech] soc: 71 soh: 10020:09:43.995 > [Pylontech] voltage: 49.660000 current: 0.000000 temperature: 24.00000020:09:44.053 > [Pylontech] chargeStatusBits: 1 1 020:09:44.113 > [Pylontech] Alarms: 0 0 0 0 0 0 020:09:44.329 > [Pylontech] Warnings: 0 0 0 0 0 0 020:09:44.531 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:09:44.739 > [Pylontech] soc: 71 soh: 10020:09:44.850 > [Pylontech] voltage: 49.570000 current: -4.200000 temperature: 24.00000020:09:45.000 > [Pylontech] chargeStatusBits: 1 1 020:09:45.071 > [Pylontech] Manufacturer: PYLON 20:09:45.130 > RX Period End 20:09:45.203 > All missing 20:09:45.304 > Nothing received, resend whole request 20:09:45.407 > TX PowerControl Channel: 23 --> 51 90 53 11 63 90 53 11 63 81 00 00 B0 01 61 20:09:45.533 > Interrupt received 20:09:45.647 > RX Channel: 61 --> D1 90 53 11 63 90 53 11 63 81 00 00 00 00 24 00 74 | -80 dBm 20:09:45.696 > [Pylontech] Alarms: 0 0 0 0 0 0 020:09:45.750 > [Pylontech] Warnings: 0 0 0 0 0 0 020:09:46.078 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:09:46.334 > [Pylontech] soc: 71 soh: 10020:09:46.466 > [Pylontech] voltage: 49.520000 current: -5.800000 temperature: 24.00000020:09:46.588 > [Pylontech] chargeStatusBits: 1 1 020:09:46.645 > RX Period End 20:09:46.698 > Success 20:09:46.763 > Fetch inverter: 114190531163 20:09:46.823 > TX RealTimeRunData Channel: 40 --> 15 90 53 11 63 90 53 11 63 80 0B 00 66 63 4C B3 00 00 00 00 00 00 00 00 DB 3B 84 20:09:46.888 > Interrupt received 20:09:47.100 > RX Channel: 61 --> 95 90 53 11 63 90 53 11 63 01 00 01 01 EF 01 39 06 0C 01 F0 01 2E 05 D8 00 02 48 | -80 dBm 20:09:47.296 > Interrupt received 20:09:47.362 > RX Channel: 61 --> 95 90 53 11 63 90 53 11 63 02 E6 DB 00 02 7B DD 00 7C 00 78 09 26 13 88 0B 52 E7 | -80 dBm 20:09:47.413 > Interrupt received 20:09:47.463 > RX Channel: 61 --> 95 90 53 11 63 90 53 11 63 83 00 00 00 7C 03 E8 01 21 00 61 DD 62 7F | -80 dBm 20:09:47.544 > PowerMeterClass: TotalPower: -4.56 20:09:47.617 > RX Period End 20:09:47.676 > Success 20:09:47.745 > [DPL::announceStatus] waiting for sufficiently recent power meter reading 20:09:47.867 > [Pylontech] Alarms: 0 0 0 0 0 0 020:09:48.084 > [Pylontech] Warnings: 0 0 0 0 0 0 020:09:48.155 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:09:48.245 > [Pylontech] soc: 71 soh: 10020:09:48.383 > [Pylontech] voltage: 49.509998 current: -5.800000 temperature: 24.00000020:09:48.445 > [Pylontech] chargeStatusBits: 1 1 020:09:48.585 > [Pylontech] Alarms: 0 0 0 0 0 0 020:09:48.644 > [Pylontech] Warnings: 0 0 0 0 0 0 020:09:48.713 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:09:48.771 > [Pylontech] soc: 71 soh: 10020:09:49.036 > [Pylontech] voltage: 49.500000 current: -5.800000 temperature: 24.00000020:09:49.227 > [Pylontech] chargeStatusBits: 1 1 020:09:49.317 > Fetch inverter: 114190531163 20:09:49.394 > TX RealTimeRunData Channel: 61 --> 15 90 53 11 63 90 53 11 63 80 0B 00 66 63 4C B8 00 00 00 00 00 00 00 00 EB 48 CC 20:09:49.457 > Interrupt received 20:09:49.513 > RX Channel: 40 --> 95 90 53 11 63 90 53 11 63 01 00 01 01 EF 01 34 05 F1 01 F0 01 2A 05 C2 00 02 A5 | -80 dBm 20:09:49.613 > Interrupt received 20:09:49.665 > RX Channel: 61 --> 95 90 53 11 63 90 53 11 63 02 E6 DB 00 02 7B DD 00 7C 00 78 09 25 13 89 0B 24 93 | -80 dBm 20:09:49.774 > Interrupt received 20:09:49.865 > RX Channel: 40 --> 95 90 53 11 63 90 53 11 63 83 00 00 00 7A 03 E8 01 20 00 61 6A E4 49 | -80 dBm 20:09:49.980 > RX Period End 20:09:50.034 > Success 20:09:50.089 > TX AlarmData Channel: 75 --> 15 90 53 11 63 90 53 11 63 80 11 00 66 63 4C B8 00 00 00 00 00 00 00 00 31 53 17 20:09:50.145 > [Pylontech] Alarms: 0 0 0 0 0 0 020:09:50.195 > [Pylontech] Warnings: 0 0 0 0 0 0 020:09:50.257 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:09:50.310 > [Pylontech] soc: 71 soh: 10020:09:50.396 > Interrupt received 20:09:50.480 > [Pylontech] voltage: 49.500000 current: -5.800000 temperature: 24.00000020:09:50.600 > RX Channel: 61 --> 95 90 53 11 63 90 53 11 63 01 00 01 B0 01 00 01 4A 67 4A 67 00 00 00 00 70 7C 29 | -80 dBm 20:09:50.742 > [Pylontech] chargeStatusBits: 1 1 020:09:50.797 > [Pylontech] Manufacturer: PYLON 20:09:50.859 > Interrupt received 20:09:50.928 > RX Channel: 61 --> 95 90 53 11 63 90 53 11 63 02 00 45 54 86 54 99 00 00 00 00 70 7C 00 47 55 15 C6 | -80 dBm 20:09:50.979 > Interrupt received 20:09:51.290 > RX Channel: 40 --> 95 90 53 11 63 90 53 11 63 07 00 00 70 7C 00 53 55 AD 55 BA 00 00 00 00 70 7C D6 | -80 dBm 20:09:51.379 > Interrupt received 20:09:51.455 > RX Channel: 61 --> 95 90 53 11 63 90 53 11 63 08 00 55 55 C2 55 CF 00 00 00 00 70 7C 00 57 55 D8 13 | -80 dBm 20:09:51.517 > Interrupt received 20:09:51.656 > RX Channel: 61 --> 95 90 53 11 63 90 53 11 63 09 55 E3 00 00 00 00 70 7C 00 59 55 ED 56 00 00 00 91 | -80 dBm 20:09:51.714 > Interrupt received 20:09:51.866 > RX Channel: 40 --> 95 90 53 11 63 90 53 11 63 0A 00 00 70 7C 00 5B 56 0B 56 1F 00 00 00 00 70 7C D0 | -80 dBm 20:09:51.924 > Interrupt received 20:09:51.978 > RX Channel: 61 --> 95 90 53 11 63 90 53 11 63 8C 56 56 00 00 00 00 CE B3 64 | -80 dBm 20:09:52.039 > RX Period End 20:09:52.096 > Middle missing 20:09:52.152 > Request retransmit: 3 20:09:52.247 > TX RequestFrame Channel: 3 --> 15 90 53 11 63 90 53 11 63 83 96 20:09:52.302 > Interrupt received 20:09:52.369 > RX Channel: 40 --> 95 90 53 11 63 90 53 11 63 03 55 26 00 00 00 00 70 7C 00 49 55 38 55 43 00 00 DB | -80 dBm 20:09:52.424 > RX Period End 20:09:52.475 > Middle missing 20:09:52.527 > Request retransmit: 4 20:09:52.585 > TX RequestFrame Channel: 23 --> 15 90 53 11 63 90 53 11 63 84 91 20:09:52.643 > Interrupt received 20:09:52.692 > RX Channel: 61 --> 95 90 53 11 63 90 53 11 63 04 00 00 70 7C 00 4B 55 4D 55 58 00 00 00 00 70 7C CF | -80 dBm 20:09:52.744 > RX Period End 20:09:52.793 > Middle missing 20:09:52.848 > Request retransmit: 5 20:09:52.905 > TX RequestFrame Channel: 40 --> 15 90 53 11 63 90 53 11 63 85 90 20:09:52.968 > Interrupt received 20:09:53.031 > RX Channel: 40 --> 95 90 53 11 63 90 53 11 63 05 00 4D 55 63 55 6D 00 00 00 00 70 7C 00 4F 55 78 BD | -80 dBm 20:09:53.085 > RX Period End 20:09:53.161 > Middle missing 20:09:53.302 > Request retransmit: 6 20:09:53.414 > TX RequestFrame Channel: 61 --> 15 90 53 11 63 90 53 11 63 86 93 20:09:53.508 > Interrupt received 20:09:53.576 > RX Channel: 61 --> 95 90 53 11 63 90 53 11 63 06 55 83 00 00 00 00 70 7C 00 51 55 8F 55 A7 00 00 30 | -80 dBm 20:09:53.625 > RX Period End 20:09:53.679 > Middle missing 20:09:53.744 > Request retransmit: 11 20:09:53.905 > TX RequestFrame Channel: 75 --> 15 90 53 11 63 90 53 11 63 8B 9E 20:09:53.959 > Interrupt received 20:09:54.013 > RX Channel: 75 --> 95 90 53 11 63 90 53 11 63 0B 00 5D 56 2A 56 3E 00 00 00 00 70 7C 00 5F 56 49 9B | -80 dBm 20:09:54.065 > RX Period End 20:09:54.259 > Success 20:09:54.443 > [Pylontech] Alarms: 0 0 0 0 0 0 020:09:54.514 > [Pylontech] Warnings: 0 0 0 0 0 0 020:09:54.976 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:09:55.182 > [Pylontech] soc: 71 soh: 10020:09:55.386 > [Pylontech] voltage: 49.480000 current: -5.800000 temperature: 24.00000020:09:55.490 > [Pylontech] chargeStatusBits: 1 1 020:09:55.581 > [Pylontech] Alarms: 0 0 0 0 0 0 020:09:55.689 > [Pylontech] Warnings: 0 0 0 0 0 0 020:09:55.752 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:09:55.806 > [Pylontech] soc: 71 soh: 10020:09:55.862 > [Pylontech] voltage: 49.480000 current: -5.700000 temperature: 24.00000020:09:55.967 > [Pylontech] chargeStatusBits: 1 1 020:09:56.035 > [Pylontech] Manufacturer: PYLON 20:09:56.089 > Fetch inverter: 114190531163 20:09:56.148 > TX RealTimeRunData Channel: 3 --> 15 90 53 11 63 90 53 11 63 80 0B 00 66 63 4C BD 00 00 00 00 00 00 00 00 BB 77 A6 20:09:56.267 > Interrupt received 20:09:56.341 > RX Channel: 61 --> 95 90 53 11 63 90 53 11 63 01 00 01 01 EF 01 34 05 F0 01 F0 01 28 05 BA 00 02 DE | -80 dBm 20:09:56.394 > Interrupt received 20:09:56.614 > RX Channel: 3 --> 95 90 53 11 63 90 53 11 63 02 E6 DC 00 02 7B DD 00 7D 00 78 09 26 13 89 0B 1A A8 | -80 dBm 20:09:56.724 > Interrupt received 20:09:56.786 > RX Channel: 3 --> 95 90 53 11 63 90 53 11 63 83 00 00 00 79 03 E8 01 20 00 61 4A C5 4B | -80 dBm 20:09:56.848 > RX Period End 20:09:56.917 > Success 20:09:56.973 > PowerMeterClass: TotalPower: -11.12 20:09:57.033 > [DPL::loop] * ENTER ** 20:09:57.507 > [DPL::loop] battery interface enabled, SoC: 71 %, StartTH: 45 %, StopTH: 15 %, SoC age: 1 s, ignore: no 20:09:57.559 > [DPL::getBatteryVoltage] BMS: 49.48 V, MPPT: 49.53 V, inverter: 49.50 V, returning: 49.48V 20:09:57.623 > [DPL::loop] dcVoltage: 49.48 V, loadCorrectedVoltage: 49.76 V, StartTH: 52.00 V, StopTH: 47.00 V 20:09:57.685 > [DPL::loop] StartTH reached: yes, StopTH reached: no, SolarPT enabled, use at night: no 20:09:57.750 > [DPL::calcPowerLimit] battery use allowed, solar power (DC): 0 W 20:09:57.802 > [DPL::calcPowerLimit] target consumption: -5 W, base load: 12 W, power meter does NOT include inverter output 20:09:57.851 > [DPL::calcPowerLimit] power meter value: -11 W, power meter valid: yes, inverter output: 284 W, solar power (AC): 0 W 20:09:57.931 > [DPL::calcPowerLimit] match household consumption with limit of -6 W 20:09:58.001 > [DPL::setNewPowerLimit] input limit: -6 W, min limit: 10 W, max limit: 500 W, hysteresis: 5 W 20:09:58.056 > [DPL::announceStatus] calculated limit is less than minimum power limit 20:09:58.106 > [DPL::updateInverter] Stopping inverter... 20:09:58.166 > TX PowerControl Channel: 23 --> 51 90 53 11 63 90 53 11 63 81 01 00 20 00 F1 20:09:58.316 > [DPL::announceStatus] waiting for a start/stop/restart command to complete 20:09:58.428 > [Pylontech] Alarms: 0 0 0 0 0 0 020:09:58.501 > [Pylontech] Warnings: 0 0 0 0 0 0 020:09:58.564 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:09:58.618 > [Pylontech] soc: 71 soh: 10020:09:58.685 > [Pylontech] voltage: 49.469997 current: -5.800000 temperature: 24.00000020:09:58.732 > [Pylontech] chargeStatusBits: 1 1 020:09:58.803 > RX Period End 20:09:58.859 > All missing 20:09:58.931 > Nothing received, resend whole request 20:09:58.996 > TX PowerControl Channel: 40 --> 51 90 53 11 63 90 53 11 63 81 01 00 20 00 F1 20:09:59.175 > Interrupt received 20:09:59.485 > RX Channel: 3 --> D1 90 53 11 63 90 53 11 63 81 00 00 01 00 B4 01 E4 | -80 dBm 20:09:59.690 > [Pylontech] Alarms: 0 0 0 0 0 0 020:09:59.849 > [Pylontech] Warnings: 0 0 0 0 0 0 020:09:59.901 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:09:59.965 > [Pylontech] soc: 71 soh: 10020:10:00.025 > [Pylontech] voltage: 49.459999 current: -5.800000 temperature: 24.10000020:10:00.071 > [Pylontech] chargeStatusBits: 1 1 020:10:00.124 > [Pylontech] Manufacturer: PYLON 20:10:00.256 > RX Period End 20:10:00.366 > Success 20:10:00.469 > Fetch inverter: 114190531163 20:10:00.531 > TX RealTimeRunData Channel: 61 --> 15 90 53 11 63 90 53 11 63 80 0B 00 66 63 4C C2 00 00 00 00 00 00 00 00 89 53 CF 20:10:00.618 > Interrupt received 20:10:00.669 > RX Channel: 3 --> 95 90 53 11 63 90 53 11 63 01 00 01 01 F0 00 32 00 F8 01 F1 00 31 00 F0 00 02 9D | -80 dBm 20:10:00.767 > Interrupt received 20:10:00.880 > RX Channel: 3 --> 95 90 53 11 63 90 53 11 63 02 E6 DC 00 02 7B DD 00 7D 00 78 09 1D 13 88 01 C2 40 | -80 dBm 20:10:00.975 > Interrupt received 20:10:01.045 > RX Channel: 3 --> 95 90 53 11 63 90 53 11 63 83 00 00 00 13 03 E8 01 20 00 62 0E CB 68 | -80 dBm 20:10:01.107 > [Pylontech] Alarms: 0 0 0 0 0 0 020:10:01.167 > [Pylontech] Warnings: 0 0 0 0 0 0 020:10:01.229 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:10:01.291 > [Pylontech] soc: 71 soh: 10020:10:01.496 > [Pylontech] voltage: 49.549999 current: -5.900000 temperature: 24.00000020:10:01.596 > [Pylontech] chargeStatusBits: 1 1 020:10:01.704 > [Pylontech] Manufacturer: PYLON 20:10:01.796 > RX Period End 20:10:01.897 > Success 20:10:01.959 > [DPL::updateInverter] Stopping inverter... 20:10:02.101 > TX PowerControl Channel: 75 --> 51 90 53 11 63 90 53 11 63 81 01 00 20 00 F1 20:10:02.152 > [Pylontech] Alarms: 0 0 0 0 0 0 020:10:02.208 > [Pylontech] Warnings: 0 0 0 0 0 0 020:10:02.320 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:10:02.375 > [Pylontech] soc: 71 soh: 10020:10:02.445 > [Pylontech] voltage: 49.599998 current: 0.000000 temperature: 24.00000020:10:02.504 > [Pylontech] chargeStatusBits: 1 1 020:10:02.619 > [Pylontech] Manufacturer: PYLON 20:10:02.673 > RX Period End 20:10:02.737 > All missing 20:10:02.785 > Nothing received, resend whole request 20:10:02.863 > TX PowerControl Channel: 3 --> 51 90 53 11 63 90 53 11 63 81 01 00 20 00 F1 20:10:02.919 > Interrupt received 20:10:02.999 > RX Channel: 75 --> D1 90 53 11 63 90 53 11 63 81 00 00 01 00 B4 01 E4 | -80 dBm 20:10:03.103 > [Pylontech] Alarms: 0 0 0 0 0 0 020:10:03.192 > [Pylontech] Warnings: 0 0 0 0 0 0 020:10:03.283 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:10:03.439 > [Pylontech] soc: 71 soh: 10020:10:03.491 > [Pylontech] voltage: 49.610001 current: 0.200000 temperature: 24.00000020:10:03.553 > [Pylontech] chargeStatusBits: 1 1 020:10:03.606 > [Pylontech] Manufacturer: PYLON 20:10:04.192 > RX Period End 20:10:04.397 > Success 20:10:04.763 > Fetch inverter: 114190531163 20:10:04.828 > TX RealTimeRunData Channel: 23 --> 15 90 53 11 63 90 53 11 63 80 0B 00 66 63 4C C7 00 00 00 00 00 00 00 00 D9 6C A5 20:10:04.884 > Interrupt received 20:10:04.971 > RX Channel: 3 --> 95 90 53 11 63 90 53 11 63 01 00 01 01 F1 00 02 00 0A 01 F2 00 02 00 08 00 02 96 | -80 dBm 20:10:05.040 > Interrupt received 20:10:05.093 > RX Channel: 75 --> 95 90 53 11 63 90 53 11 63 02 E6 DC 00 02 7B DD 00 7D 00 78 09 1C 13 88 00 00 82 | -80 dBm 20:10:05.162 > Interrupt received 20:10:05.221 > RX Channel: 3 --> 95 90 53 11 63 90 53 11 63 83 00 00 00 00 00 00 01 1E 00 62 8B A0 40 | -80 dBm 20:10:05.390 > PowerMeterClass: TotalPower: 273.15 20:10:05.459 > RX Period End 20:10:05.526 > Success 20:10:05.599 > [DPL::announceStatus] waiting for sufficiently recent power meter reading 20:10:05.707 > TX AlarmData Channel: 40 --> 15 90 53 11 63 90 53 11 63 80 11 00 66 63 4C C7 00 00 00 00 00 00 00 00 03 77 7E 20:10:05.797 > Interrupt received 20:10:05.865 > RX Channel: 3 --> 95 90 53 11 63 90 53 11 63 01 00 01 B0 01 00 01 4A 67 4A 67 00 00 00 00 70 7C 29 | -80 dBm 20:10:06.007 > [Pylontech] Alarms: 0 0 0 0 0 0 020:10:06.062 > [Pylontech] Warnings: 0 0 0 0 0 0 020:10:06.124 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:10:06.343 > [Pylontech] soc: 71 soh: 10020:10:06.547 > [Pylontech] voltage: 49.619999 current: 0.200000 temperature: 24.00000020:10:06.957 > [Pylontech] chargeStatusBits: 1 1 020:10:07.264 > Interrupt received 20:10:07.776 > RX Channel: 40 --> 95 90 53 11 63 90 53 11 63 04 00 00 70 7C 00 4D 55 63 55 6D 00 00 00 00 70 7C D2 | -80 dBm 20:10:07.979 > Interrupt received 20:10:08.075 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 05 00 4F 55 78 55 83 00 00 00 00 70 7C 00 51 55 8F A3 | -80 dBm 20:10:08.164 > Interrupt received 20:10:08.235 > RX Channel: 40 --> 95 90 53 11 63 90 53 11 63 06 55 A7 00 00 00 00 70 7C 00 53 55 AD 55 BA 00 00 29 | -80 dBm 20:10:08.286 > Interrupt received 20:10:08.451 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 09 56 00 00 00 00 00 70 7C 00 5B 56 0B 56 1F 00 00 89 | -80 dBm 20:10:08.508 > Interrupt received 20:10:08.653 > RX Channel: 40 --> 95 90 53 11 63 90 53 11 63 0A 00 00 70 7C 00 5D 56 2A 56 3E 00 00 00 00 70 7C D6 | -30 dBm 20:10:08.731 > Interrupt received 20:10:08.874 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 0B 00 5F 56 49 56 56 00 00 00 00 70 7C 00 61 56 60 85 | -80 dBm 20:10:08.937 > Interrupt received 20:10:09.034 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 8C 56 6B 00 00 00 00 EE 1D D7 | -80 dBm 20:10:09.211 > RX Period End 20:10:09.269 > Middle missing 20:10:09.519 > Request retransmit: 2 20:10:09.924 > TX RequestFrame Channel: 61 --> 15 90 53 11 63 90 53 11 63 82 97 20:10:10.125 > Interrupt received 20:10:10.330 > RX Channel: 40 --> 95 90 53 11 63 90 53 11 63 02 00 47 55 15 55 26 00 00 00 00 70 7C 00 49 55 38 CB | -80 dBm 20:10:10.638 > RX Period End 20:10:10.842 > Middle missing 20:10:10.902 > Request retransmit: 3 20:10:10.989 > TX RequestFrame Channel: 75 --> 15 90 53 11 63 90 53 11 63 83 96 20:10:11.102 > Interrupt received 20:10:11.193 > RX Channel: 23 --> 95 90 53 11 63 90 53 11 63 03 55 43 00 00 00 00 70 7C 00 4B 55 4D 55 58 00 00 D2 | -80 dBm 20:10:11.331 > RX Period End 20:10:11.401 > Middle missing 20:10:11.488 > Request retransmit: 7 20:10:11.868 > TX RequestFrame Channel: 3 --> 15 90 53 11 63 90 53 11 63 87 92 20:10:12.237 > Interrupt received 20:10:12.350 > RX Channel: 40 --> 95 90 53 11 63 90 53 11 63 07 00 00 70 7C 00 55 55 C2 55 CF 00 00 00 00 70 7C CA | -80 dBm 20:10:12.406 > RX Period End 20:10:12.544 > Middle missing 20:10:12.668 > Request retransmit: 8 20:10:12.726 > TX RequestFrame Channel: 23 --> 15 90 53 11 63 90 53 11 63 88 9D 20:10:12.858 > Interrupt received 20:10:12.952 > RX Channel: 61 --> 95 90 53 11 63 90 53 11 63 08 00 57 55 D8 55 E3 00 00 00 00 70 7C 00 59 55 ED 1C | -80 dBm 20:10:13.001 > RX Period End 20:10:13.053 > Success 20:10:13.161 > [Pylontech] Alarms: 0 0 0 0 0 0 020:10:13.264 > [Pylontech] Warnings: 0 0 0 0 0 0 020:10:13.322 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:10:13.472 > [Pylontech] soc: 71 soh: 10020:10:13.579 > [Pylontech] voltage: 49.629997 current: 0.200000 temperature: 24.00000020:10:13.688 > [Pylontech] chargeStatusBits: 1 1 020:10:13.779 > [Pylontech] Manufacturer: PYLON 20:10:13.876 > Fetch inverter: 114190531163 20:10:13.983 > TX RealTimeRunData Channel: 40 --> 15 90 53 11 63 90 53 11 63 80 0B 00 66 63 4C CC 00 00 00 00 00 00 00 00 E9 1F ED 20:10:14.038 > Interrupt received 20:10:14.126 > RX Channel: 61 --> 95 90 53 11 63 90 53 11 63 01 00 01 01 F1 00 02 00 0A 01 F2 00 02 00 08 00 02 96 | -80 dBm 20:10:14.429 > Interrupt received 20:10:14.595 > RX Channel: 40 --> 95 90 53 11 63 90 53 11 63 02 E6 DC 00 02 7B DD 00 7D 00 78 09 1D 13 87 00 00 8C | -80 dBm 20:10:14.704 > Interrupt received 20:10:14.765 > RX Channel: 61 --> 95 90 53 11 63 90 53 11 63 83 00 00 00 00 00 00 01 1E 00 62 84 75 9A | -80 dBm 20:10:15.041 > [Pylontech] Alarms: 0 0 0 0 0 0 020:10:15.411 > [Pylontech] Warnings: 0 0 0 0 0 0 020:10:15.475 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:10:15.611 > [Pylontech] soc: 71 soh: 10020:10:15.714 > [Pylontech] voltage: 49.639999 current: 0.200000 temperature: 24.00000020:10:15.771 > [Pylontech] chargeStatusBits: 1 1 020:10:15.834 > [Pylontech] Manufacturer: PYLON 20:10:15.883 > RX Period End 20:10:15.962 > Success 20:10:16.025 > [Pylontech] Alarms: 0 0 0 0 0 0 020:10:16.084 > [Pylontech] Warnings: 0 0 0 0 0 0 020:10:16.223 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:10:16.329 > [Pylontech] soc: 71 soh: 10020:10:16.464 > [Pylontech] voltage: 49.649998 current: 0.200000 temperature: 24.00000020:10:16.480 > [Pylontech] chargeStatusBits: 1 1 020:10:16.542 > [Pylontech] Manufacturer: PYLON 20:10:16.641 > [Pylontech] Alarms: 0 0 0 0 0 0 020:10:16.743 > [Pylontech] Warnings: 0 0 0 0 0 0 020:10:16.854 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:10:17.088 > [Pylontech] soc: 71 soh: 10020:10:17.400 > [Pylontech] voltage: 49.649998 current: 0.200000 temperature: 24.00000020:10:17.576 > [Pylontech] chargeStatusBits: 1 1 020:10:17.666 > [Pylontech] Manufacturer: PYLON 20:10:17.719 > Fetch inverter: 114190531163 20:10:17.787 > TX RealTimeRunData Channel: 61 --> 15 90 53 11 63 90 53 11 63 80 0B 00 66 63 4C D1 00 00 00 00 00 00 00 00 B9 8A 35 20:10:17.907 > Interrupt received 20:10:17.950 > RX Channel: 40 --> 95 90 53 11 63 90 53 11 63 83 00 00 00 00 00 00 01 1E 00 62 84 75 9A | -80 dBm 20:10:18.009 > RX Period End 20:10:18.075 > Middle missing 20:10:18.168 > Request retransmit: 1 20:10:18.274 > TX RequestFrame Channel: 75 --> 15 90 53 11 63 90 53 11 63 81 94 20:10:18.332 > RX Period End 20:10:18.414 > Middle missing 20:10:18.449 > Request retransmit: 1 20:10:18.522 > TX RequestFrame Channel: 3 --> 15 90 53 11 63 90 53 11 63 81 94 20:10:18.584 > PowerMeterClass: TotalPower: 276.01 20:10:18.830 > [DPL::loop] * ENTER ** 20:10:19.137 > [DPL::loop] battery interface enabled, SoC: 71 %, StartTH: 45 %, StopTH: 15 %, SoC age: 1 s, ignore: no 20:10:19.227 > [DPL::getBatteryVoltage] BMS: 49.65 V, MPPT: 49.73 V, inverter: 49.70 V, returning: 49.65V 20:10:19.326 > [DPL::loop] dcVoltage: 49.65 V, loadCorrectedVoltage: 49.65 V, StartTH: 52.00 V, StopTH: 47.00 V 20:10:19.546 > [DPL::loop] StartTH reached: yes, StopTH reached: no, SolarPT enabled, use at night: no 20:10:19.854 > [DPL::calcPowerLimit] battery use allowed, solar power (DC): 0 W 20:10:20.274 > [DPL::calcPowerLimit] target consumption: -5 W, base load: 12 W, power meter does NOT include inverter output 20:10:20.442 > [DPL::calcPowerLimit] power meter value: 276 W, power meter valid: yes, inverter output: 0 W, solar power (AC): 0 W 20:10:20.527 > [DPL::calcPowerLimit] match household consumption with limit of 281 W 20:10:20.569 > [DPL::setNewPowerLimit] input limit: 281 W, min limit: 10 W, max limit: 500 W, hysteresis: 5 W 20:10:20.626 > [DPL::setNewPowerLimit] inverter max: 800 W, inverter is NOT producing, requesting: 281 W, reported: 288 W, diff: 7 W 20:10:20.789 > [DPL::updateInverter] sending limit of 35.1 % (281 W respectively), max output is 800 W 20:10:20.792 > [Pylontech] Alarms: 0 0 0 0 0 0 020:10:20.844 > [Pylontech] Warnings: 0 0 0 0 0 0 020:10:20.896 > RX Period End 20:10:20.960 > Middle missing 20:10:21.058 > Request retransmit: 1 20:10:21.114 > TX RequestFrame Channel: 23 --> 15 90 53 11 63 90 53 11 63 81 94 20:10:21.245 > [DPL::announceStatus] waiting for a power limit command to complete 20:10:21.346 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:10:21.451 > Interrupt received 20:10:21.508 > [Pylontech] soc: 71 soh: 10020:10:21.757 > RX Channel: 75 --> 95 90 53 11 63 90 53 11 63 01 00 01 01 F1 00 02 00 0A 01 F2 00 02 00 08 00 02 96 | -80 dBm 20:10:21.853 > [Pylontech] voltage: 49.660000 current: 0.200000 temperature: 24.00000020:10:21.908 > [Pylontech] chargeStatusBits: 1 1 020:10:21.960 > RX Period End 20:10:22.019 > Middle missing 20:10:22.072 > Request retransmit: 2 20:10:22.134 > TX RequestFrame Channel: 40 --> 15 90 53 11 63 90 53 11 63 82 97 20:10:22.211 > Interrupt received 20:10:22.270 > RX Channel: 75 --> 95 90 53 11 63 90 53 11 63 02 E6 DC 00 02 7B DD 00 7D 00 78 09 1D 13 87 00 00 8C | -80 dBm 20:10:22.368 > RX Period End 20:10:22.459 > Success 20:10:22.521 > TX ActivePowerControl Channel: 61 --> 51 90 53 11 63 90 53 11 63 81 0B 00 01 5F 00 01 4E F1 3B 20:10:22.581 > Interrupt received 20:10:22.692 > RX Channel: 75 --> D1 90 53 11 63 90 53 11 63 81 00 00 0B 00 14 07 48 | -80 dBm 20:10:22.767 > [Pylontech] Alarms: 0 0 0 0 0 0 020:10:22.885 > [Pylontech] Warnings: 0 0 0 0 0 0 020:10:23.199 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:10:23.252 > [Pylontech] soc: 71 soh: 10020:10:23.315 > [Pylontech] voltage: 49.660000 current: 0.200000 temperature: 24.00000020:10:23.364 > [Pylontech] chargeStatusBits: 1 1 020:10:23.523 > RX Period End 20:10:23.698 > Success 20:10:23.767 > [DPL::updateInverter] actual limit is 35.0 % (280 W respectively), effective 2543 ms after update started, requested were 35.1 % 20:10:23.925 > [DPL::updateInverter] Starting inverter... 20:10:23.984 > TX PowerControl Channel: 75 --> 51 90 53 11 63 90 53 11 63 81 00 00 B0 01 61 20:10:24.043 > [DPL::announceStatus] waiting for a start/stop/restart command to complete 20:10:24.333 > Interrupt received 20:10:24.422 > RX Channel: 61 --> D1 90 53 11 63 90 53 11 63 81 00 00 00 00 24 00 74 | -80 dBm 20:10:24.473 > [Pylontech] Alarms: 0 0 0 0 0 0 020:10:24.587 > [Pylontech] Warnings: 0 0 0 0 0 0 020:10:24.769 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:10:24.974 > [Pylontech] soc: 71 soh: 10020:10:25.206 > [Pylontech] voltage: 49.669998 current: 0.200000 temperature: 24.00000020:10:25.384 > [Pylontech] chargeStatusBits: 1 1 020:10:25.592 > [Pylontech] Manufacturer: PYLON 20:10:25.798 > RX Period End 20:10:26.100 > Success 20:10:26.510 > Fetch inverter: 114190531163 20:10:26.817 > TX RealTimeRunData Channel: 3 --> 15 90 53 11 63 90 53 11 63 80 0B 00 66 63 4C D7 00 00 00 00 00 00 00 00 19 A1 B8 20:10:27.059 > Interrupt received 20:10:27.227 > RX Channel: 61 --> 95 90 53 11 63 90 53 11 63 01 00 01 01 F1 00 4C 01 77 01 F2 00 46 01 5C 00 02 B5 | -80 dBm 20:10:27.535 > Interrupt received 20:10:27.669 > RX Channel: 61 --> 95 90 53 11 63 90 53 11 63 02 E6 DC 00 02 7B DD 00 7D 00 78 09 1F 13 89 02 A7 25 | -80 dBm 20:10:27.726 > Interrupt received 20:10:27.796 > RX Channel: 75 --> 95 90 53 11 63 90 53 11 63 83 00 00 00 1D 03 E8 01 1E 00 63 35 FE 57 | -80 dBm 20:10:27.861 > RX Period End 20:10:27.926 > Success 20:10:27.985 > [DPL::announceStatus] waiting for sufficiently recent power meter reading 20:10:28.049 > [Pylontech] Alarms: 0 0 0 0 0 0 020:10:28.112 > [Pylontech] Warnings: 0 0 0 0 0 0 020:10:28.175 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:10:28.311 > [Pylontech] soc: 71 soh: 10020:10:28.562 > [Pylontech] voltage: 49.590000 current: -2.600000 temperature: 24.00000020:10:28.643 > [Pylontech] chargeStatusBits: 1 1 020:10:28.762 > [Pylontech] Manufacturer: PYLON 20:10:28.816 > [Pylontech] Alarms: 0 0 0 0 0 0 020:10:28.875 > [Pylontech] Warnings: 0 0 0 0 0 0 020:10:28.937 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:10:29.011 > [Pylontech] soc: 71 soh: 10020:10:29.072 > [Pylontech] voltage: 49.549999 current: -5.800000 temperature: 24.00000020:10:29.163 > [Pylontech] chargeStatusBits: 1 1 020:10:29.216 > Fetch inverter: 114190531163 20:10:29.339 > TX RealTimeRunData Channel: 23 --> 15 90 53 11 63 90 53 11 63 80 0B 00 66 63 4C DC 00 00 00 00 00 00 00 00 29 D2 F0 20:10:29.460 > PowerMeterClass: TotalPower: -5.11 20:10:29.620 > [DPL::loop] *** ENTER ** 20:10:29.623 > [DPL::loop] battery interface enabled, SoC: 71 %, StartTH: 45 %, StopTH: 15 %, SoC age: 2 s, ignore: no 20:10:29.680 > [DPL::getBatteryVoltage] BMS: 49.55 V, MPPT: 49.57 V, inverter: 49.70 V, returning: 49.55V 20:10:29.750 > [DPL::loop] dcVoltage: 49.55 V, loadCorrectedVoltage: 49.62 V, StartTH: 52.00 V, StopTH: 47.00 V 20:10:29.801 > [DPL::loop] StartTH reached: yes, StopTH reached: no, SolarPT enabled, use at night: no 20:10:29.878 > [DPL::calcPowerLimit] battery use allowed, solar power (DC): 0 W 20:10:29.911 > [DPL::calcPowerLimit] target consumption: -5 W, base load: 12 W, power meter does NOT include inverter output 20:10:29.975 > [DPL::calcPowerLimit] power meter value: -5 W, power meter valid: yes, inverter output: 67 W, solar power (AC): 0 W 20:10:30.401 > [DPL::calcPowerLimit] match household consumption with limit of 0 W 20:10:30.618 > [DPL::setNewPowerLimit] input limit: 0 W, min limit: 10 W, max limit: 500 W, hysteresis: 5 W 20:10:30.878 > [DPL::announceStatus] calculated limit is less than minimum power limit 20:10:31.133 > [DPL::updateInverter] Stopping inverter... 20:10:31.183 > [Pylontech] Alarms: 0 0 0 0 0 0 020:10:31.198 > [Pylontech] Warnings: 0 0 0 0 0 0 020:10:31.397 > RX Period End 20:10:31.452 > All missing 20:10:31.511 > Nothing received, resend whole request 20:10:31.589 > TX RealTimeRunData Channel: 40 --> 15 90 53 11 63 90 53 11 63 80 0B 00 66 63 4C DC 00 00 00 00 00 00 00 00 29 D2 F0 20:10:31.642 > [DPL::announceStatus] waiting for a start/stop/restart command to complete 20:10:31.803 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:10:31.904 > [Pylontech] soc: 71 soh: 10020:10:31.945 > [Pylontech] voltage: 49.529999 current: -5.700000 temperature: 24.00000020:10:32.020 > [Pylontech] chargeStatusBits: 1 1 020:10:32.101 > Interrupt received 20:10:32.158 > RX Channel: 75 --> 95 90 53 11 63 90 53 11 63 83 00 02 00 78 03 E8 01 1F 00 63 1F 89 6C | -80 dBm 20:10:32.211 > RX Period End 20:10:32.317 > Middle missing 20:10:32.401 > Request retransmit: 1 20:10:32.516 > TX RequestFrame Channel: 61 --> 15 90 53 11 63 90 53 11 63 81 94 20:10:32.609 > Interrupt received 20:10:32.736 > RX Channel: 75 --> 95 90 53 11 63 90 53 11 63 01 00 01 01 EF 01 30 05 DD 01 F0 01 25 05 A9 00 02 E9 | -80 dBm 20:10:32.797 > RX Period End 20:10:32.860 > Middle missing 20:10:32.919 > Request retransmit: 2 20:10:32.984 > TX RequestFrame Channel: 75 --> 15 90 53 11 63 90 53 11 63 82 97 20:10:33.044 > Interrupt received 20:10:33.128 > RX Channel: 61 --> 95 90 53 11 63 90 53 11 63 02 E6 DC 00 02 7B DE 00 7D 00 79 09 26 13 8A 0A F9 4B | -80 dBm 20:10:33.180 > RX Period End 20:10:33.251 > Success 20:10:33.310 > TX AlarmData Channel: 3 --> 15 90 53 11 63 90 53 11 63 80 11 00 66 63 4C DC 00 00 00 00 00 00 00 00 F3 C9 2B 20:10:33.364 > [Pylontech] Alarms: 0 0 0 0 0 0 020:10:33.448 > [Pylontech] Warnings: 0 0 0 0 0 0 020:10:33.501 > [Pylontech] chargeVoltage: 53.200001 chargeCurrentLimitation: 25.000000 dischargeCurrentLimitation: 25.00000020:10:33.648 > [Pylontech] soc: 71 soh: 10020:10:33.699 > [Pylontech] voltage: 49.509998 current: -5.800000 temperature: 24.00000020:10:33.753 > [Pylontech] chargeStatusBits: 1 1 020:10:33.815 > [Pylontech] Manufacturer: PYLON 20:10:33.865 > RX Period End 20:10:33.931 > All missing 20:10:33.982 > Nothing received, resend whole request 20:10:34.190 > TX AlarmData Channel: 23 --> 15 90 53 11 63 90 53 11 63 80 11 00 66 63 4C DC 00 00 00 00 00 00 00 00 F3 C9 2B 20:10:34.397 > RX Period End 20:10:34.506 > All missing 20:10:34.606 > Nothing received, resend whole request 20:10:34.707 > TX AlarmData Channel: 40 --> 15 90 53 11 63 90 53 11 63 80 11 00 66 63 4C DC 00 00 00 00 00 00 00 00 F3 C9 2B 20:10:34.775 > Interrupt received 20:10:34.892 > RX Channel: 61 --> 95 90 53 11 63 90 53 11 63 01 00 01 B0 01 00 01 4A 67 4A 67 00 00 00 00 70 7C 29 | -80 dBm 20:10:34.947 > Interrupt received 20:10:34.999 > RX Channel: 75 --> 95 90 53 11 63 90 53 11 63 02 00 47 55 15 55 26 00 00 00 00 70 7C 00 49 55 38 CB | -80 dBm 20:10:35.065 > Interrupt received 20:10:35.120 > RX Channel: 75 --> 95 90 53 11 63 90 53 11 63 07 00 00 70 7C 00 55 55 C2 55 CF 00 00 00 00 70 7C CA | -80 dBm 20:10:35.170 > Interrupt received 20:10:35.227 > RX Channel: 75 --> 95 90 53 11 63 90 53 11 63 0A 00 00 70 7C 00 5D 56 2A 56 3E 00 00 00 00 70 7C D6 | -80 dBm 20:10:35.279 > Interrupt received 20:10:35.378 > RX Channel: 61 --> 95 90 53 11 63 90 53 11 63 0B 00 5F 56 49 56 56 00 00 00 00 70 7C 00 61 56 60 85 | -80 dBm 20:10:35.447 > Interrupt received 20:10:35.788 > RX Channel: 61 --> 95 90 53 11 63 90 53 11 63 8C 56 6B 00 00 00 00 EE 1D D7 | -80 dBm 20:10:35.848 > RX Period End 20:10:35.990 > Middle missing 20:10:36.048 > Request retransmit: 3 20:10:36.114 > TX RequestFrame Channel: 61 --> 15 90 53 11 63 90 53 11 63 83 96 20:10:36.179 > RX Period End 20:10:36.236 > Middle missing 20:10:36.307 > Request retransmit: 3 20:10:36.366 > TX RequestFrame Channel: 75 --> 15 90 53 11 63 90 53 11 63 83 96 20:10:36.413 > Interrupt received 20:10:36.463 > RX Channel: 75 --> 95 90 53 11 63 90 53 11 63 03 55 43 00 00 00 00 70 7C 00 4B 55 4D 55 58 00 00 D2 | -80 dBm