Problems with Feedback and Logging

[vonglan]

Hi,

I know this error report is a bit vague (so far), but maybe you already have a suspicion what could be the reason.

At first I noticed that the feedback for the "bank select" buttons that I configured on the Behringer X-Touch Mini did not work anymore in a specific project. I have had this before. Reasons that I found so far:

• No or wrong number of bank values in the parameter setting (in connection with the bug that the controller compartment config was not saved - meanwhile fixed)
• missing "send feedback after control"
• issue #777

But I am quite sure these reasons were not the problem here. I turned on all logging options. Strangely, I saw the virtual feedback in the logging, but not the real feedback to match it. (Even though the physical feedback worked before on the same device, and still works when I create a new project)

Then, I started a new project from scratch. Now, the feedback worked physically. But even after switching all logging options on, only the Real control was logged! No target logging, and no feedback logging at all, when I press the buttons that switch banks. When I turn the encoders, I get the virtual feedback logging, at least (in addition to the real control).

[vonglan]

One more observation: The logged virtual feedback belongs to the encoders/buttons of the bank below (1 less) than the selected bank.