issues
search
herolic
/
aeroquad
Automatically exported from code.google.com/p/aeroquad
0
stars
0
forks
source link
issues
Newest
Newest
Most commented
Recently updated
Oldest
Least commented
Least recently updated
BMP085 pressure reading code uses non initialised variables
#46
GoogleCodeExporter
closed
9 years ago
2
Optimize EEPROM Writes
#45
GoogleCodeExporter
closed
9 years ago
1
In readEEPROM the calls to receiver.setTransmitterSlope and receiver.setTransmitterOffset are nonsense
#44
GoogleCodeExporter
closed
9 years ago
2
class FlightAngle_DCM has no member named 'get'
#43
GoogleCodeExporter
closed
9 years ago
2
PID dTerm calculation does not use delay since last call
#42
GoogleCodeExporter
closed
9 years ago
1
Milli second accuracy used in loop() to set G_Dt is not sufficient, introducing 33-50% error in updating control values.
#41
GoogleCodeExporter
closed
9 years ago
1
Check v1.7 shield orientations work with v2.1 flight software
#40
GoogleCodeExporter
closed
9 years ago
1
Make a smaller version of the configurator screen for Netbooks
#39
GoogleCodeExporter
opened
9 years ago
5
getGyroAngle in FlightAngle.h is buggy
#38
GoogleCodeExporter
closed
9 years ago
1
for-loop bug in flightangle.h
#37
GoogleCodeExporter
closed
9 years ago
1
FlightAngle.h: Missing DCM Kp & Ki definitions for 1.7 shield w/ ADXL 335
#36
GoogleCodeExporter
closed
9 years ago
3
accelScaleFactor definition in Mega_V2 class and _v1 class are swapped.
#35
GoogleCodeExporter
closed
9 years ago
1
Wrong gyroScaleFactor for Gyro_AeroQuad_v1 in 2.0.x
#34
GoogleCodeExporter
closed
9 years ago
1
Accel Z Indication 90 degrees off (Mega, 1.7, IXZ500, v2,0.1, 2.5 Config
#33
GoogleCodeExporter
closed
9 years ago
1
Wii sensor problems: after calibration gyro roll & pitch are 45 / -45 (not 0). Gyro jaw data is reversed.
#32
GoogleCodeExporter
closed
9 years ago
1
Motor XConfig view in configurator
#31
GoogleCodeExporter
closed
9 years ago
1
Raw Sensor Data graph the Y scale is huge and changing the scale is not persistant
#30
GoogleCodeExporter
closed
9 years ago
2
Raw Sensor Data / 'Q' command only showing values for Rol and Pitch
#29
GoogleCodeExporter
closed
9 years ago
1
Document C++ Class Approach
#28
GoogleCodeExporter
closed
9 years ago
1
Change PID into a C++ Class
#27
GoogleCodeExporter
closed
9 years ago
1
Fix accel/gyro engineering units
#26
GoogleCodeExporter
closed
9 years ago
1
Implement MixerTable in Flight Software and Configurator
#25
GoogleCodeExporter
opened
9 years ago
3
Add servo configuration to the Configurator
#24
GoogleCodeExporter
opened
9 years ago
2
Receiver.pde assignment instructions
#23
GoogleCodeExporter
closed
9 years ago
1
Configurator - Export Settings to File
#22
GoogleCodeExporter
opened
9 years ago
1
Adjust gyro bias in real time flight
#21
GoogleCodeExporter
closed
9 years ago
2
Re-check localized decimal usage for Mac Configurator
#20
GoogleCodeExporter
closed
9 years ago
2
Add servo control to Flight Software
#19
GoogleCodeExporter
closed
9 years ago
4
Investigate adding Wii sensor to AeroQuad flight software
#18
GoogleCodeExporter
closed
9 years ago
1
Fix NaN values in transmitter cal if not calibrating all channels
#17
GoogleCodeExporter
closed
9 years ago
1
Add PPM pulse train receiver option
#16
GoogleCodeExporter
opened
9 years ago
8
Transmitter is dead
#15
GoogleCodeExporter
closed
9 years ago
2
Verify correct telemetry is sent for filtered transmitter values
#14
GoogleCodeExporter
closed
9 years ago
4
Add auto hover capability using accelerometer/sonar/baro
#13
GoogleCodeExporter
opened
9 years ago
3
Add remote commanding capability
#12
GoogleCodeExporter
opened
9 years ago
2
Add remote commanding capability
#11
GoogleCodeExporter
opened
9 years ago
6
Baud Rate
#10
GoogleCodeExporter
closed
9 years ago
1
Updated angle calculation may be returning 0 for gyros
#9
GoogleCodeExporter
closed
9 years ago
1
Add comment to show compatibility for IDG300 and IDG500
#8
GoogleCodeExporter
closed
9 years ago
1
Add exponential transmitter curve capability
#7
GoogleCodeExporter
opened
9 years ago
5
Unable to complete transmitter calibration if no channels 5 & 6
#6
GoogleCodeExporter
closed
9 years ago
1
User forced to run as Administator under Windows Vista/7
#5
GoogleCodeExporter
closed
9 years ago
1
Don't allow user to exit while Configurator is reconnecting to AeroQuad
#4
GoogleCodeExporter
closed
9 years ago
2
Default flight connection screen to show gyro indicators and motor plots
#3
GoogleCodeExporter
closed
9 years ago
2
Motor Commmands show inverted
#2
GoogleCodeExporter
closed
9 years ago
3
Force sending of '.' instead of ',' when using a non-English version of Windows
#1
GoogleCodeExporter
closed
9 years ago
4
Previous