search

hoverbike1 / TOTK-Mods-collection

Mod repo for TOTK on Yuzu emulator.
Apache License 2.0
2.92k stars 200 forks source link

Survey : Recommended hardware for emulation #72

Open HolographicWings opened 1 year ago

HolographicWings commented 1 year ago

Comment here by following this template :

Copy paste : 

- CPU : 
- GPU : 
- RAM : 
- Emulator : 
- Approximative Playtime : 
  - Yuzu : 
  - Ryuginx : 
- Average framerate : 
  - Yuzu : 
  - Ryuginx : 
- API : 
- Notes :

Tips : Use two spaces in end of a line to Line break.

vasilvestre commented 1 year ago

CPU : I5 9600k GPU : RTX 2060 6gb RAM : 16Gb 3200Mhz Approximative Playtime : Above 40 hours Emulator : Yuzu Average framerate : Yuzu : 55/40fps in wilds, 40/25 in towns

Using SSD

erfan00725 commented 1 year ago

CPU : I5 11400f GPU : RTX 3060 ti 8gb RAM : 16Gb 3200Mhz Approximative Playtime : Above 30 hours Emulator : Yuzu Average framerate : Yuzu : 60/45fps in wilds, 45/30 in towns

agenttank commented 1 year ago

thank you for your effords!

Pypotato-debug commented 1 year ago

• CPU : I7 11400f

• GPU : RTX 3060 laptop

• RAM : 16Gb 3200Mhz

• Emulator : yuzu EA 3690

• Approximative Playtime : ± 50h

• Average framerate : 45/38 (the lowest 27fps)

• Notes :

systox commented 1 year ago
ryu666zaki commented 1 year ago
AlexIndiex commented 1 year ago
TuxidoFrog commented 1 year ago
ddogg26 commented 1 year ago
Interinactive commented 1 year ago
ttJobo commented 1 year ago
R1chterScale commented 1 year ago
Krutonium commented 1 year ago
Vikijaka commented 1 year ago
shmoo commented 1 year ago
VinhNgT commented 1 year ago
Alqio commented 1 year ago
sanwecn commented 1 year ago
EubanksL commented 1 year ago

HARDWARE SPECIFICATIONS :

ADDITIONAL NOTES :

INSTALLED MODS :

DaemonF commented 1 year ago

Feel free to contact me for any follow up questions. Like I mentioned, I work in graphics optimization and am a tinkerer, so can definitely help debug or test changes.

InfiniteParallel commented 1 year ago

CPU : Intel i7 11800H GPU : RTX 3060 (6 GB) 85W (Laptop) RAM : 16Gb 3200Mhz OS Win 11 22H2 TotK Version: 1.1.1 Emulator : Yuzu EA

API : Vulkan Average framerate : Yuzu : Very solidly 30 with 30 fps frame rate lock. Get dips sometimes, but they are transient and rare. Approximative Playtime : Yuzu : I'd be amazed if it wasn't triple digits hours at this point

Graphics: Use Disk Pipeline Cache: On Use asynchronous GPU emulation : On Accelerate ASTC Texture Decoding : On Vsync Mode: Mailbox NVDEC emulation : GPU Video Decoding Fullscreen Mode : Exclusive Fullscreen Aspect Ratio : Default (16:9) Resolution : 2x Window Adapting Filter : Bicubic Anti-Aliasing Method : SMAA

Advanced Graphics: Accuracy Level : Normal ASTC recompression : Uncompressed (Despite limited VRAM I haven't seen any indications of trouble) Enable asynchronous presentation: Off Force maximum clocks: Off Decode ASTC textures asynchronously : Off Enable Reactive Flushing : On Use asynchronous shader building : On Use Fast GPU Time : Off Use Vulkan Pipeline Cache : On Anisotropic Filtering : x16

Mods: (All installed separately) FPS 30 Disable Internal FSR Downscaling Disable Internal FSR Sharpening Shader Disable Dynamic resolution Disable LOD Quality Reduction Disable Targeting DOF LOD Improvement Island Fix Shadows 1024 Anisotropic Filtering fix Resolution: Chuck's 1008p Unbreakable Equipment (RomFS)

Cheats: Infinite Durability Became broken after Yuzu EA 3607, no longer used

Notes:

Steady improvements using Yuzu EA until after Yuzu EA 3607 when the "Infinite Durability" cheat stopped working. I switched to the "Unbreakable Equipment (RomFS)" mod from GameBanana but since Yuzu EA 3617 I have begun to experience 3 different bugs all related to the "Unbreakable Equipment" mod. The first is random infinite loading screens that can occur at any time. The second is that I can no longer switch shields. If I try to switch shields it just doesn't happen and the icon for the desired shield disappears. If I try to drop that shield it simply disappears from my inventory and doesn't appear on the ground. The third is Gannon, in any form, cannot access his weapon, he makes a movement to grab it and nothing appears. He just keeps repeating the movement and no weapon appears. If I disable the "Unbreakable Equipment" mod all the issues disappear. I'm not sure if the mod is broken in some way, or its some sort of interaction with any of the graphical mods I am using. Before Yuzu EA 3617 it worked perfectly.

PlusMitarbeiter commented 1 year ago
craftycorvid commented 1 year ago
jtmcdole commented 1 year ago
zer03eleven commented 1 year ago
widowshyper commented 1 year ago
threethan commented 1 year ago
onezerus commented 1 year ago
S0utherN commented 1 year ago

CPU : i5 13600KF GPU : RTX 3080 RAM : 32Gb 6000C34 Emulator : Yuzu and Ryuginx Approximative Playtime : Yuzu : Above 10 hours. Ryuginx : 5 hours. Average framerate : Yuzu : 120/80fps in wilds, 80/65 in towns Ryuginx : 65/50 fps in wilds, 55/40 in towns API : Vulkan

GreenComfyTea commented 1 year ago
Mods - 60FPSCutscenes v2 - Dialogue Fixes v4 - Dualsense UI Mod v11.5 - Normal - White - FPS - 60FPS Static - FPS - DynamicFPS v1.5.1 - Includes Cutscene-Fix, Vertical Sensitivity Fix - Do not mix with DynamicFPS++ - Graphics - Anisotropic Filtering Fix - Set AF to 16 in Yuzu advanced graphics settings - Graphics - Disable Dynamic resolution when low FPS - Graphics - Disable Internal FSR downscaling - Graphics - Disable Internal FSR sharpening shader - Graphics - Disable Internal FXAA v2 (1.1.2) - Graphics - Disable LOD Quality Reduction - Graphics - Disable Targeting DOF - Graphics - Island Fix - Graphics - LOD Improvement - Graphics - Shadows - 1024x - highest stable - NoLootBoxes v2.0.1 - Resolution - Chuck's 1008p - Zero AO Bugs **Notes :** - Mods were last updated on 30/05/2023
Yuzu Settings - General - **Limit Speed Percent :** On (100%) **Notes :** - Makes the game run at 60 FPS (I have 60FPS monitor, no GSync/FreeSync). If I disable it, the game goes over 60 FPS sometimes (to ~65 FPS), ignoring Vsync.
Yuzu Settings - System - **Language :** British English - **Region :** Australia - **Time Zone :** Egypt **Notes :** - This combination of language and region settings switched the in-game temperature from °F to °C.
Yuzu Settings - CPU - **Accuracy :** Auto
Yuzu Settings - Graphics - **API :** Vulkan - **Use disk pipeline cache :** On - **Use asynchronous GPU emulation :** On - **Accelerate ASTC texture decoding :** On - **Vsync Mode :** FIFO Relaxed - **NVDEC emulation :** GPU Video Decoding - **Resolution :** 3X (2160p/3240p) - **Window Adapting Filter :** AMD FidelityFX Super Resolution - **Anti-Aliasing Method :** SMAA - **Set FSR Sharpness :** 0% **Notes :** - My general rule for Vsync mode choice: - FIFO = to minimize power consumption - FIFO Relaxed = to minimize stuttering - Mailbox = to minimize latency - SMAA + FSR Sharpness 0% looks the best imo
Yuzu Settings - Adv. Graphics - **Accuracy Level :** Normal - **ASTC recompression :** Uncompressed - **Enable asynchronous presentation (Vulkan only) :** Off - **Force maximum clocks (Vulkan only) :** Off - **Decode ASTC textures asynchronously (Hack) :** Off - **Enable Reactive Flushing :** On - **Use asynchronous shader building (Hack) :** Off - **Use Fast GPU Time (Hack) :** Off - **Use Vulcan pipeline cache :** On - **Anisotropic Filtering :** 16x **Notes :** - Decode ASTC textures asynchronously (Hack) is Off because it breaks weapon icons.
Ryuginx Settings - CPU - **PPTC (Profiled Persistent Translation Cache :** On - **Memory Manager Mode :** Host Unchecked (fastest, unsafe)
Ryuginx Settings - Graphics - **Graphics Backend :** Vulkan - **Enable Shader Cache :** On - **Enable Texture Recompression :** Off - **Enable Macro HLE :** On - **Resolution Scale :** 3x (2160p/3240p) - **Anti-Aliasing :** SMAA Ultra - **Scaling Filter :** FSR 0 - **Anisotropic Filtering :** 16x - **Graphics Backend Multithreading :** On
Nvidia Control Panel 3D Settings - **Ambient Occlusion :** Quality - **Antialiasing - FXAA :** Off - **Antialiasing - Transparency :** 8x (supersample) - **Low Latency Mode :** On - **Multi-Frame Sampled AA (MFAA) :** On - **Power management mode :** Prefer maximum performance - **Threaded optimization :** On - **Triple buffering :** On - **Vulkan/OpenGL present method :** Prefer layered on DXGI Swapchain
Nvidia Profile Inspector Settings - **OGL_DX_PRESENT_DEBUG :** 0x00080001
FPS graph ![yuzu_fJ1aRDzRPb](https://github.com/HolographicWings/TOTK-Mods-collection/assets/30152047/3dcb9183-b1da-4dca-86b6-4cbe86aa46e8)
Ryuginx FPS graph ![Ryujinx Ava_BTu3rpBKu8](https://github.com/HolographicWings/TOTK-Mods-collection/assets/30152047/0dc60b40-27c7-4a7a-8635-3748641a6f1e)
General Notes - All info here is with using Yuzu, unless stated otherwise. - Yuzu mode: Docked. - Sometimes Gloom is not rendered properly and it looks flat. Starting the game in windowed mode, loading into the save and switching to fullscreen only after I have control of the character fixes the issue for me. - I try to update mods and yuzu early access as often as possible. - I only play on Yuzu. Ryuginx was only used for testing for this survey. It didn't try to optimize the settings for max performance. - FPS in an open world area: varies between 50 and 60. - FPS in an enclosed area (shrines, caves): stable 60. - FPS drops when shader compilation happens (duh). Usually it goes down to ~45. - On Ryuginx: shader compilation was droping FPS from ~37 to ~25. - Changing between x1, x2 or x3 resolutions have no effect on my FPS. Obvious reason is that my GPU can tank any of those, and actual FPS drops come from CPU and Yuzu. - Yuzu, the game, NAND and the cache are located on NVMe SSD. - Average CPU Stats : 62 °C, 36% - Average RAM : 4 500 MB - Average GPU Stats : 62 °C, 50-60%, - Average VRAM : 10 000 MB
niconeitor commented 1 year ago
albion-returns commented 1 year ago
boooing39 commented 1 year ago
avidflyer17 commented 1 year ago
su497776915 commented 1 year ago
hoverbike1 commented 1 year ago
f4cuL commented 1 year ago
cliffom commented 1 year ago
xNicklaj commented 1 year ago
nightgrey commented 1 year ago
educastro11 commented 1 year ago

Lenovo Legion i7 Intel i7 13 generation RTX 4060 8gb VRAM 32gb RAM 1tb SSD

VULKAN GPU HIGH OR NORMAL BILINEAR SMAA SCALE 2x

Game 30FPS in it all (including towns) Frame 32.3 average

Time of gameplay: Not sure but it must be above 50hrs on YUZU

Running really good when computer is plugged in electricity being almost 100% perfect. It will get 20FPS if computer is not plugged.

omarjimenezo commented 1 year ago

CPU : Ryzen 4 1400 GPU : GTX 1070 RAM : 8Gb 3200Mhz Emulator : Yuzu Approximative Playtime : 10hrs Yuzu : 10hrs Average framerate : 18 Yuzu : 15/30fps in wilds, 9/22 in towns, 30/44 in Sanctuary API : Vulkan

cYNIC-01 commented 1 year ago
t0mmyb0y78 commented 1 year ago
Muramasa95 commented 1 year ago
laxu commented 1 year ago

CPU : Intel 13600K GPU : RTX 4090 RAM : 32Gb DDR5-6000 Emulator : Ryuginx Approximative Playtime :

Ryuginx : ~50 hours Average framerate :

Ryuginx : 50-60 fps, 4K resolution API : Vulkan Notes : Using the Lazy pack 60 fps 720p 3x for 4K and DualSense mod with a DualShock 4 controller. So far no crashes, but Ultrahand etc seem to get stuck for a bit on activation often, requiring wiggling the right stick to "unstick". Motion controls also don't work but that's most likely a Ryujinx issue. Shader compilation stutter happens of course.

Yzen90 commented 1 year ago
AnArcticPigeon commented 1 year ago
axujen commented 1 year ago
isolatedpm commented 1 year ago