user docs for HyTech's pi

ports

8000: param server 8001: file server 6969: old frontend

starting and stopping recording

Connect to http://192.168.203.1:6969/ once on the ht08 wifi.

getting files off the car

1. connect to the pi's local wifi network named ht08
2. open a command prompt that has ssh installed (powershell or bash)
3. scp nixos@192.168.203.1:/home/nixos/recordings/* . (password is nixos)

fixing MCAP files that werent properly closed

you may need to fix the mcap files as when they are not correctly closed (when we turn of LV it doesnt close the file correctly)

developer deployment and usage

pre-reqs:

• for non-nixOs systems that have the nix package manager installed:

  • enable nix flakes
  • install qemu-user-static package then in /etc/nix/nix.conf add: extra-platforms = aarch64-linux arm-linux and trusted-users = root <username> and then restart nix-daemon.service

• to build the flake defined image: nix build .#images.rpi4 --system aarch64-linux

typical workflow:

1. Pull from Github
2. Update nix flake with nix flake update
3. build with
   • nix build .#tcu_top --system aarch64-linux for the tcu
4. connect to ht08 wifi network while tcu is on
5. nix-copy-closure --to nixos@192.168.203.1 result/ (will have store path as part of output to switch to. this exact store path will be switched to)
6. (ssh into pi ssh nixos@192.168.203.1) password is nixos
7. sudo /nix/store/<hash>-nixos-system-<version>/bin/switch-to-configuration switch
8. profit

notes:

pushing to cachix (via emulated aarch64-linux): (after following the registration steps for pushing)

nix build --system aarch64-linux --json \
  | jq -r '.[].outputs | to_entries[].value' \
  | cachix push rcmast3r

writing to sd card with dd. the /dev/sd<> should just point to the device and not an existing partition on the device (eg: /dev/sdd):

zstdcat <file.img.zst in result/> | sudo dd of=/dev/sd<change-me-pls> bs=4M status=progress oflag=direct