ZynqMP-FPGA-Ubuntu20.04-Ultra96
Note
New versions of the contents proveded in this repository are provided in the repository shown at the following URL.
https://github.com/ikwzm/ZynqMP-FPGA-Ubuntu20.04
Below is a description of the older version.
Overview
Introduction
This Repository provides a Linux Boot Image(U-boot, Kernel, Ubuntu 20.04 Desktop) for Ultra96/Ultra96-V2.
Features
- Hardware
- Ultra96 : Xilinx Zynq UltraScale+ MPSoC development board based on the Linaro 96Boards specification.
- Ultra96-V2 : updates and refreshes the Ultra96 product that was released in 2018.
- Boot Loader
- FSBL(First Stage Boot Loader for ZynqMP)
- PMU Firmware(Platform Management Unit Firmware)
- BL31(ARM Trusted Firmware Boot Loader stage 3-1)
- U-Boot xilinx-v2019.2 (customized)
- Linux Kernel Version v5.4.0
- linux-xlnx tag=xilinx-v2020.2
- Enable Device Tree Overlay with Configuration File System
- Enable FPGA Manager
- Enable FPGA Bridge
- Enable FPGA Reagion
- Enable ATWILC3000 Linux Driver for Ultra96-V2
- Enable CIFS (Common Internet File System)
- Enable Lima (Open-source reverse-engineered driver for Mali-4xx GPUs)
- Enable Xilinx APF Accelerator driver
- Enable Xilinx APF DMA engines support
- Ubuntu20.04(focal) Desktop Root File System
Install
Install to SD-Card
Setup Ultra96 borad
- Put the SD-Card in the slot on Ultra96.
- Plug in your Display Port monitor into the Ultra96 using the mini Display Port connector.
- Plug in a USB mouse and USB keyboard into the USB ports of the Ultra96.
Starting Ultra96 board
- Turn on the Ultra96.
- After a few seconds, the Ubuntu login screen will appear on the display.
- Your username is "fpga". Password is set to "fpga". Please login.
- The password for administrator rights is "admin".
FAQ
Build