iliasam / Laser_tape_reverse_engineering

Alternative firmware for a cheap X-40 laser tape measure
https://habrahabr.ru/post/327642
MIT License
123 stars 46 forks source link

Arduino Nano Not working #10

Closed manisaranbala closed 1 year ago

manisaranbala commented 1 year ago

My device U85B .Nano RX TX connect not reading.but TTL good reading .we need Arduino Nano or 2560 program connect Desktop.it is possible?

iliasam commented 1 year ago

Sorry, I don't understand your question. Can you describe step by step what you already tried? What hardware do you have?

manisaranbala commented 1 year ago

2023-11-08_04h47_28 my device 40m 85B TTL MODE Reading good. but not reading Arduino Nano serial communication

manisaranbala commented 1 year ago

https://github.com/iliasam/Laser_tape_reverse_engineering/assets/5657183/c912efa5-3983-4914-af42-9ec90e0fe0e4

laser light power is down in few minutes. and also the reading is differ so how can solve it

manisaranbala commented 1 year ago

set volt 2.2 and 3 and 3.2 same Problems

manisaranbala commented 1 year ago

https://github.com/iliasam/Laser_tape_reverse_engineering/assets/5657183/d4dd4189-3ae5-41b0-8331-4e6f3562143d

manisaranbala commented 1 year ago

Result_2023-11-14 12-49-20.csv

iliasam commented 1 year ago

Do you have this problem with USB-UART converter? Also, try to disconnect RX line of U85B module - maybe 5V from Arduino is bad for U85B.

manisaranbala commented 1 year ago

internal battery (AAA)same problem. Need continue Data Reading possible?

manisaranbala commented 1 year ago

WhatsApp Image 2023-11-14 at 4 13 26 PM WhatsApp Image 2023-11-14 at 4 13 26 PM (1) WhatsApp Image 2023-11-14 at 4 13 26 PM (2) WhatsApp Image 2023-11-14 at 4 13 27 PM (1)
![WhatsApp Image 2023-11-14 at 4 13 27 PM (2)](https://github.com/iliasam/Laser_tape_reverse_engineering/assets/5657183/04176423-4633-41c3-810f-3f7759e47310)
How to find this model good or bad

manisaranbala commented 1 year ago

WhatsApp Image 2023-11-14 at 4 13 27 PM (2)

iliasam commented 1 year ago

Again: "Do you have this problem with USB-UART converter? Also, try to disconnect RX line of U85B module - maybe 5V from Arduino is bad for U85B"

manisaranbala commented 1 year ago

https://github.com/iliasam/Laser_tape_reverse_engineering/assets/5657183/57c5d04f-e0e8-43cd-845b-881dcae52d1a

manisaranbala commented 1 year ago

Amplitude Reduse Automatically . That time mismatched calculation . how to solve this problems?