This is the Home Assistant JVC Component implementing my JVC library
All the features in my JVC library including:
Note: JVC projectors currently only support a single network connection at a time. If you're running other control systems or attempt to run the JVC AutoCal software, keep in mind you can only have one control system connected at a time.
Note: Only NX and NZ series are officially supported but this should work with any JVC projector that has an ethernet port.
This is currently only a custom component. Unlikely to make it into HA core because their process is just too burdensome.
Install HACS, then install the component by adding this repository as a custom repo. More details here - https://hacs.xyz/docs/faq/custom_repositories
You can also just copy all the files into your custom_components folder but then you won't have automatic updates.
This uses Config Flow. Install the custom component, restart, then add an integration as you normally do. Search JVC, and find the one that shows a box icon next to it. There is an official JVC Integration but it is limited and unrelated to this one.
upon HA restart, it will automatically reconnect. No action is needed from you
replace nz7 with the name of your remote entity
sensor:
platform: template
sensors:
jvc_installation_mode:
value_template: >
{% if is_state('remote.nz7', 'on') %}
{{ states.remote.nz7.attributes.installation_mode }}
{% else %}
Off
{% endif %}These are the attributes supported for the entity
Use the remote.send_command service to send commands to the projector.
$command,$parameter
example: "anamorphic,off"
example: "anamorphic,d"
example: "laser_dim,auto3"
It also supports using remote codes as ASCII found here (Code A only)
example: "remote,2E"
Currently Supported Commands:
anamorphic
aperture
aspect_ratio
color_mode
content_type
content_type_trans
enhance
eshift_mode
get_model
get_software_version
graphic_mode
hdr_data
hdr_level
hdr_processing
input_level
input_mode
installation_mode
lamp_power
lamp_time
laser_mode
laser_power
low_latency
mask
menu
motion_enhance
picture_mode
power
remote
signal_3d
source_status
theater_optimizer
Currently Supported Parameters:
AnamorphicModes
off
a
b
c
d
ApertureModes
off
auto1
auto2
AspectRatioModes
zoom
auto
native
ColorSpaceModes
auto
YCbCr444
YCbCr422
RGB
ContentTypeTrans
sdr
hdr10_plus
hdr10
hlg
ContentTypes
auto
sdr
hdr10_plus
hdr10
hlg
EnhanceModes
zero
one
two
three
four
five
six
seven
eight
nine
ten
EshiftModes
off
on
GraphicModeModes
standard
hires1
hires2
HdrData
sdr
hdr
smpte
hybridlog
hdr10_plus
none
HdrLevel
auto
min2
min1
zero
plus1
plus2
HdrProcessing
hdr10_plus
static
frame_by_frame
scene_by_scene
InputLevel
standard
enhanced
superwhite
auto
InputModes
hdmi1
hdmi2
InstallationModes
mode1
mode2
mode3
mode4
mode5
mode6
mode7
mode8
mode9
mode10
LampPowerModes
normal
high
LaserModes
off
auto1
auto2
auto3
LaserPowerModes
low
med
high
LowLatencyModes
off
on
MaskModes
on
off
MenuModes
menu
lens_control
up
down
back
left
right
ok
MotionEnhanceModes
off
low
high
PictureModes
film
cinema
natural
hdr
thx
frame_adapt_hdr
user1
user2
user3
user4
user5
user6
hlg
hdr_plus
pana_pq
filmmaker
frame_adapt_hdr2
frame_adapt_hdr3
PowerModes
off
on
PowerStates
standby
on
cooling
reserved
emergency
SourceStatuses
logo
no_signal
signal
TheaterOptimizer
off
on
ThreeD
auto
sbs
ou
2dI used this to re-create the JVC remote in HA. Add the YAML to your dashboard to get a grid which resembles most of the remote. Other functions can be used via remote.send_command. See the library readme for details.
Add this sensor to your configuration.yml. Replace the nz7 with the name of your entity. Restart HA.
alias: JVC - HDR PM Automation
description: ""
trigger:
- platform: state
entity_id:
- remote.nz7
attribute: content_type
condition:
- condition: not
conditions:
- condition: state
entity_id: remote.nz7
attribute: content_type
state: sdr
action:
- if:
- condition: state
entity_id: select.harmony_hub_2_activities
state: Game
then:
- service: remote.send_command
data:
command: picture_mode,hdr10
mode: single
sensor:
- platform: template
sensors:
jvc_low_latency:
value_template: >
{% if is_state('remote.nz7', 'on') %}
{% if states.remote.nz7.attributes.low_latency == false %}
Off
{% elif states.remote.nz7.attributes.low_latency == true %}
On
{% endif %}
{% else %}
Off
{% endif %}Here is something to get you started. You can add buttons and sensors as needed.
type: grid
cards:
- type: button
name: Power
show_icon: false
entity: remote.nz7
show_state: true
show_name: true
icon: mdi:power
- type: button
tap_action:
action: call-service
service: jvc_projectors.info
service_data: {}
target:
entity_id: remote.nz7
show_icon: false
name: Info
hold_action:
action: none
- type: button
tap_action:
action: call-service
service: remote.send_command
service_data:
command: menu,up
target:
entity_id: remote.nz7
show_name: false
show_icon: true
icon: mdi:arrow-up
hold_action:
action: none
- type: button
tap_action:
action: call-service
service: remote.send_command
service_data:
command: menu,menu
target:
entity_id: remote.nz7
show_name: true
show_icon: false
name: Menu
hold_action:
action: none
- type: button
tap_action:
action: toggle
show_icon: false
- type: button
tap_action:
action: none
show_icon: false
entity: sensor.jvc_low_latency
show_name: true
show_state: true
name: Low Latency
hold_action:
action: none
- type: button
tap_action:
action: call-service
service: remote.send_command
service_data:
command: menu,left
target:
entity_id: remote.nz7
show_name: false
icon: mdi:arrow-left
- type: button
tap_action:
action: call-service
service: remote.send_command
service_data:
command: menu, ok
target:
entity_id: remote.nz7
name: OK
show_icon: false
- type: button
tap_action:
action: call-service
service: remote.send_command
service_data:
command: menu, right
target:
entity_id: remote.nz7
show_name: false
icon: mdi:arrow-right
- type: button
tap_action:
action: toggle
show_icon: false
show_name: false
- type: button
tap_action:
action: toggle
show_icon: false
- type: button
tap_action:
action: call-service
service: remote.send_command
service_data:
command: menu,back
target:
entity_id: remote.nz7
name: Back
show_icon: false
- type: button
tap_action:
action: call-service
service: remote.send_command
service_data:
command: menu,down
target:
entity_id: remote.nz7
show_name: false
icon: mdi:arrow-down
- type: button
tap_action:
action: toggle
show_icon: false
- type: button
tap_action:
action: toggle
show_icon: false
columns: 5