Add LVDS lines to Video Kit

[RIOctavian]

Connect the Video Kit to an evaluation board containing LVDS driver and receiver.

Final goal: to have 2 LVDS-TS lines working for the future implementation of OrbSight V2.

[RIOctavian]

Evaluation board SN65LVDS31-32EVM connected in a loopback configuration for two lines:

• Everything sent on LVDS0_TX will be received on LVDS0_RX.
• Everything sent on LVDS1_TX will be received on LVDS1_RX.

Connected to the video kit on the MikroBUS connector:

• 3V3 at J49 pin 7.
• GND at J49 pin 8.
• LVDS0_TX at J49 pin 4.
• LVDS1_TX at J49 pin 5.
• LVDS0_RX at J50 pin 3.
• LVDS0_RX at J50 pin 4.

Schematics.PDF

[katia-katkat]

To verify, connect J49 pin 4 to J50 pin 3, J49 pin 5 to J50 pin 4 and execute the mss-gpio baremetal example located in the sw folder.

UT verification :