search

intelligent-agent / replicape

3D-printer cape for BeagleBone
https://www.thing-printer.com/product/replicape/
Other
10 stars 7 forks source link

Replicape not recognized #1

Closed fcorrea closed 5 years ago

fcorrea commented 5 years ago

Hi there

Finally decided to test my replicape using Kamikaze 2.1 Went through the flashing process and it seemed to be alright but after rebooting, the cape does not get recognized. This is a BeagleBone Black Rev A5A with Replicape Rev B3. External power supply with 24V.

root@kamikaze:~# cat /sys/devices/platform/bone_capemgr/slots 
 0: PF----  -1 
 1: PF----  -1 
 2: PF----  -1 
 3: PF----  -1

Boot log:

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.1.38-bone24 (root@a2-imx6q-wandboard-2gb) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.4) ) #1 Fri Jan 20 13:05:02 UTC 2017
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: TI AM335x BeagleBone Black
[    0.000000] cma: Reserved 24 MiB at 0x9e800000
[    0.000000] Memory policy: Data cache writeback
[    0.000000] On node 0 totalpages: 131072
[    0.000000] free_area_init_node: node 0, pgdat c0aa6b5c, node_mem_map de36d000
[    0.000000]   Normal zone: 1152 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 131072 pages, LIFO batch:31
[    0.000000] CPU: All CPU(s) started in SVC mode.
[    0.000000] AM335X ES2.0 (sgx neon )
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129920
[    0.000000] Kernel command line: console=ttyO0,115200n8 root=UUID=9eeb8141-f892-459e-9ac2-b5b61b338240 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 quiet consoleblank=0 fbcon=rotate:1 omap_wdt.nowayout=0
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 476924K/524288K available (6283K kernel code, 815K rwdata, 3444K rodata, 444K init, 845K bss, 22788K reserved, 24576K cma-reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
                   vector  : 0xffff0000 - 0xffff1000   (   4 kB)
                   fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
                   vmalloc : 0xe0800000 - 0xff000000   ( 488 MB)
                   lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
                   pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
                   modules : 0xbf800000 - 0xbfe00000   (   6 MB)
                     .text : 0xc0008000 - 0xc09880e4   (9729 kB)
                     .init : 0xc0989000 - 0xc09f8000   ( 444 kB)
                     .data : 0xc09f8000 - 0xc0ac3d40   ( 816 kB)
                      .bss : 0xc0ac6000 - 0xc0b994b8   ( 846 kB)
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[    0.000000] OMAP clockevent source: timer2 at 24000000 Hz
[    0.000011] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
[    0.000028] clocksource timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.000038] OMAP clocksource: timer1 at 24000000 Hz
[    0.000278] Console: colour dummy device 80x30
[    0.000302] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'
[    0.000308] This ensures that you still see kernel messages. Please
[    0.000314] update your kernel commandline.
[    0.000330] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736)
[    0.089202] pid_max: default: 32768 minimum: 301
[    0.089302] Security Framework initialized
[    0.089373] AppArmor: AppArmor disabled by boot time parameter
[    0.089380] Yama: becoming mindful.
[    0.089551] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.089561] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.090176] Initializing cgroup subsys blkio
[    0.090196] Initializing cgroup subsys memory
[    0.090233] Initializing cgroup subsys devices
[    0.090248] Initializing cgroup subsys freezer
[    0.090266] Initializing cgroup subsys net_cls
[    0.090279] Initializing cgroup subsys perf_event
[    0.090291] Initializing cgroup subsys net_prio
[    0.090331] CPU: Testing write buffer coherency: ok
[    0.090380] ftrace: allocating 31500 entries in 62 pages
[    0.155344] Setting up static identity map for 0x800081c0 - 0x8000820c
[    0.158948] devtmpfs: initialized
[    0.170597] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[    0.178450] omap_hwmod: tptc0 using broken dt data from edma
[    0.178546] omap_hwmod: tptc1 using broken dt data from edma
[    0.178636] omap_hwmod: tptc2 using broken dt data from edma
[    0.182975] omap_hwmod: debugss: _wait_target_disable failed
[    0.224586] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.226764] xor: measuring software checksum speed
[    0.319171]    arm4regs  :  1245.200 MB/sec
[    0.419168]    8regs     :  1113.200 MB/sec
[    0.519166]    32regs    :  1196.400 MB/sec
[    0.619168]    neon      :  1812.000 MB/sec
[    0.619175] xor: using function: neon (1812.000 MB/sec)
[    0.619328] pinctrl core: initialized pinctrl subsystem
[    0.620380] NET: Registered protocol family 16
[    0.623148] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[    0.623856] cpuidle: using governor ladder
[    0.623872] cpuidle: using governor menu
[    0.626525] OMAP GPIO hardware version 0.1
[    0.634326] No ATAGs?
[    0.634353] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.809233] raid6: int32x1  gen()   266 MB/s
[    0.979208] raid6: int32x1  xor()   229 MB/s
[    1.149264] raid6: int32x2  gen()   391 MB/s
[    1.319211] raid6: int32x2  xor()   268 MB/s
[    1.489275] raid6: int32x4  gen()   396 MB/s
[    1.659216] raid6: int32x4  xor()   271 MB/s
[    1.829245] raid6: int32x8  gen()   368 MB/s
[    1.999201] raid6: int32x8  xor()   243 MB/s
[    2.169180] raid6: neonx1   gen()  1473 MB/s
[    2.339173] raid6: neonx2   gen()  1797 MB/s
[    2.509192] raid6: neonx4   gen()  1205 MB/s
[    2.679189] raid6: neonx8   gen()   928 MB/s
[    2.679195] raid6: using algorithm neonx2 gen() 1797 MB/s
[    2.679202] raid6: using intx1 recovery algorithm
[    2.685442] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
[    2.688810] SCSI subsystem initialized
[    2.689088] libata version 3.00 loaded.
[    2.689422] usbcore: registered new interface driver usbfs
[    2.689478] usbcore: registered new interface driver hub
[    2.689545] usbcore: registered new device driver usb
[    2.689981] omap_i2c 44e0b000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe
[    2.690022] omap_i2c 4819c000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c2_pins, deferring probe
[    2.690116] media: Linux media interface: v0.10
[    2.690167] Linux video capture interface: v2.00
[    2.690258] pps_core: LinuxPPS API ver. 1 registered
[    2.690264] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    2.690289] PTP clock support registered
[    2.690843] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
[    2.691746] NetLabel: Initializing
[    2.691759] NetLabel:  domain hash size = 128
[    2.691764] NetLabel:  protocols = UNLABELED CIPSOv4
[    2.691814] NetLabel:  unlabeled traffic allowed by default
[    2.692323] Switched to clocksource timer1
[    2.763710] NET: Registered protocol family 2
[    2.764391] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    2.764434] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[    2.764472] TCP: Hash tables configured (established 4096 bind 4096)
[    2.764531] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    2.764547] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    2.764707] NET: Registered protocol family 1
[    2.765125] RPC: Registered named UNIX socket transport module.
[    2.765136] RPC: Registered udp transport module.
[    2.765143] RPC: Registered tcp transport module.
[    2.765148] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.765559] Unpacking initramfs...
[    3.123012] Freeing initrd memory: 5624K (cfa82000 - d0000000)
[    3.123550] CPU PMU: Failed to parse /pmu/interrupt-affinity[0]
[    3.123589] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available
[    3.125527] futex hash table entries: 256 (order: -1, 3072 bytes)
[    3.125620] audit: initializing netlink subsys (disabled)
[    3.125698] audit: type=2000 audit(3.080:1): initialized
[    3.126599] zpool: loaded
[    3.126613] zbud: loaded
[    3.126832] VFS: Disk quotas dquot_6.6.0
[    3.126887] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    3.127360] NFS: Registering the id_resolver key type
[    3.127411] Key type id_resolver registered
[    3.127419] Key type id_legacy registered
[    3.127441] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    3.127692] fuse init (API version 7.23)
[    3.127890] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[    3.129437] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    3.129572] io scheduler noop registered
[    3.129583] io scheduler deadline registered
[    3.129613] io scheduler cfq registered (default)
[    3.130646] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[    3.132100] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
[    3.134296] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 154, base_baud = 3000000) is a 8250
[    3.134778] console [ttyS0] enabled
[    3.135778] [drm] Initialized drm 1.1.0 20060810
[    3.136734] usbcore: registered new interface driver dln2
[    3.138494] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.138519] ehci-platform: EHCI generic platform driver
[    3.138660] ehci-omap: OMAP-EHCI Host Controller driver
[    3.139938] 47401300.usb-phy supply vcc not found, using dummy regulator
[    3.141838] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[    3.141853] musb-hdrc: MHDRC RTL version 2.0 
[    3.141860] musb-hdrc: setup fifo_mode 4
[    3.141877] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    3.142886] 47401b00.usb-phy supply vcc not found, using dummy regulator
[    3.144656] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[    3.144670] musb-hdrc: MHDRC RTL version 2.0 
[    3.144677] musb-hdrc: setup fifo_mode 4
[    3.144688] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    3.144779] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[    3.145011] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
[    3.145171] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    3.145182] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.145191] usb usb1: Product: MUSB HDRC host driver
[    3.145199] usb usb1: Manufacturer: Linux 4.1.38-bone24 musb-hcd
[    3.145207] usb usb1: SerialNumber: musb-hdrc.1.auto
[    3.145813] hub 1-0:1.0: USB hub found
[    3.145845] hub 1-0:1.0: 1 port detected
[    3.153734] mousedev: PS/2 mouse device common for all mice
[    3.154902] omap_rtc 44e3e000.rtc: already running
[    3.155212] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
[    3.155684] i2c /dev entries driver
[    3.157245] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[    3.157626] sdhci: Secure Digital Host Controller Interface driver
[    3.157634] sdhci: Copyright(c) Pierre Ossman
[    3.157998] omap_hsmmc 48060000.mmc: Got CD GPIO
[    3.242731] sdhci-pltfm: SDHCI platform and OF driver helper
[    3.242786] ledtrig-cpu: registered to indicate activity on CPUs
[    3.242879] hidraw: raw HID events driver (C) Jiri Kosina
[    3.243781] usbcore: registered new interface driver usbhid
[    3.243789] usbhid: USB HID core driver
[    3.243995] ashmem: initialized
[    3.245592] oprofile: using arm/armv7
[    3.245967] NET: Registered protocol family 10
[    3.247868] mip6: Mobile IPv6
[    3.247894] NET: Registered protocol family 17
[    3.248013] Key type dns_resolver registered
[    3.248026] mpls_gso: MPLS GSO support
[    3.248318] omap_voltage_late_init: Voltage driver support not added
[    3.257208] cpu cpu0: of_pm_voltdm_notifier_register: Failed to get cpu0 regulator/voltdm: -517
[    3.257223] cpu cpu0: cpu0 clock notifier not ready, retry
[    3.262984] ThumbEE CPU extension supported.
[    3.263009] Registering SWP/SWPB emulation handler
[    3.263830] registered taskstats version 1
[    3.264779] Btrfs loaded
[    3.287252] Key type encrypted registered
[    3.288994] input: tps65217_pwr_but as /devices/platform/ocp/44e0b000.i2c/i2c-0/0-0024/input/input0
[    3.305579] mmc1: MAN_BKOPS_EN bit is not set
[    3.307373] mmc1: new high speed MMC card at address 0001
[    3.307865] mmcblk0: mmc1:0001 MMC02G 1.79 GiB 
[    3.308093] mmcblk0boot0: mmc1:0001 MMC02G partition 1 1.00 MiB
[    3.308462] mmcblk0boot1: mmc1:0001 MMC02G partition 2 1.00 MiB
[    3.310084] tps65217 0-0024: TPS65217 ID 0xe version 1.2
[    3.310538] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[    3.310575] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[    3.310688]  mmcblk0: p1
[    3.313445] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[    3.313724] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[    3.313995] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[    3.314263] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[    3.314288] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz
[    3.320723] bone_capemgr bone_capemgr: Baseboard: 'A335BNLT,0A5A,1613BBBK0940'
[    3.320747] bone_capemgr bone_capemgr: compatible-baseboard=ti,beaglebone-black - #slots=4
[    3.357472] bone_capemgr bone_capemgr: Invalid signature 'ffffffff' at slot 0
[    3.364661] bone_capemgr bone_capemgr: slot #0: No cape found
[    3.442342] bone_capemgr bone_capemgr: slot #1: No cape found
[    3.483344] musb-hdrc musb-hdrc.1.auto: Babble
[    3.487829] musb-hdrc musb-hdrc.1.auto: Babble
[    3.492305] musb-hdrc: setup fifo_mode 4
[    3.492320] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    3.502339] bone_capemgr bone_capemgr: slot #2: No cape found
[    3.562335] bone_capemgr bone_capemgr: slot #3: No cape found
[    3.568165] bone_capemgr bone_capemgr: initialized OK.
[    3.568589] cpu cpu0: of_pm_voltdm_notifier_register: Fail calculating voltage latency[950000<->1325000]:-22
[    3.568898] cpu cpu0: of_pm_voltdm_notifier_register: Fail calculating voltage latency[950000<->1325000]:-22
[    3.632342] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[    3.632358] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[    3.632645] davinci_mdio: dt: updated phy_id[0] from phy_mask[fffffffe]
[    3.632670] davinci_mdio: dt: updated phy_id[1] from phy_mask[fffffffe]
[    3.637984] libphy: 4a101000.mdio: probed
[    3.638014] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[    3.638690] cpsw 4a100000.ethernet: Detected MACID = c8:a0:30:c0:6f:cb
[    3.639963] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:40:43 UTC (946687243)
[    3.639989] of_cfs_init
[    3.640066] of_cfs_init: OK
[    3.643344] PM: Hibernation image not present or could not be loaded.
[    3.644197] Freeing unused kernel memory: 444K (c0989000 - c09f8000)
[    3.725643] random: systemd-udevd urandom read with 9 bits of entropy available
[    3.833713] musb-hdrc musb-hdrc.1.auto: Babble
[    3.838247] musb-hdrc musb-hdrc.1.auto: Babble
[    3.842727] musb-hdrc: setup fifo_mode 4
[    3.842744] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    4.183438] musb-hdrc musb-hdrc.1.auto: Babble
[    4.187972] musb-hdrc musb-hdrc.1.auto: Babble
[    4.192452] musb-hdrc: setup fifo_mode 4
[    4.192469] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    4.335298] tda998x 0-0070: found TDA19988
[    4.336418] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    4.336429] [drm] No driver support for vblank timestamp query.
[    4.503820] Console: switching to colour frame buffer device 135x120
[    4.533438] musb-hdrc musb-hdrc.1.auto: Babble
[    4.588405] tilcdc 4830e000.lcdc: fb0:  frame buffer device
[    4.588416] tilcdc 4830e000.lcdc: registered panic notifier
[    4.588445] [drm] Initialized tilcdc 1.0.0 20121205 on minor 0
[    4.607648] usb 1-1: new full-speed USB device number 5 using musb-hdrc
[    4.653463] musb-hdrc musb-hdrc.1.auto: Babble
[    4.657966] musb-hdrc musb-hdrc.1.auto: Babble
[    4.662445] musb-hdrc: setup fifo_mode 4
[    4.662462] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    4.888401] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
[    5.003462] musb-hdrc musb-hdrc.1.auto: Babble
[    5.007980] musb-hdrc musb-hdrc.1.auto: Babble
[    5.012459] musb-hdrc: setup fifo_mode 4
[    5.012477] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    5.215441] systemd[1]: System time before build time, advancing clock.
[    5.335961] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    5.336417] systemd[1]: Detected architecture arm.
[    5.337731] systemd[1]: Set hostname to <kamikaze>.
[    5.353406] musb-hdrc musb-hdrc.1.auto: Babble
[    5.357913] musb-hdrc musb-hdrc.1.auto: Babble
[    5.362391] musb-hdrc: setup fifo_mode 4
[    5.362408] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    5.703414] musb-hdrc musb-hdrc.1.auto: Babble
[    5.707940] musb-hdrc musb-hdrc.1.auto: Babble
[    5.712421] musb-hdrc: setup fifo_mode 4
[    5.712438] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    5.811528] systemd[1]: Created slice System Slice.
[    5.812477] systemd[1]: Created slice User and Session Slice.
[    5.812588] systemd[1]: Reached target Slices.
[    5.812858] systemd[1]: Listening on fsck to fsckd communication Socket.
[    5.813361] systemd[1]: Listening on Journal Audit Socket.
[    5.813695] systemd[1]: Listening on Journal Socket.
[    5.816150] systemd[1]: Mounting /sys/kernel/debug...
[    5.819604] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    5.833193] systemd[1]: Starting Remount Root and Kernel File Systems...
[    5.871896] systemd[1]: Starting Load Kernel Modules...
[    5.872069] systemd[1]: Reached target Encrypted Volumes.
[    5.878457] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.882774] systemd[1]: Started Read required files in advance.
[    5.894479] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    5.899107] systemd[1]: Listening on Journal Socket (/dev/log).
[    5.899561] systemd[1]: Listening on Syslog Socket.
[    5.904017] systemd[1]: Starting Journal Service...
[    5.914502] systemd[1]: Starting Nameserver information manager...
[    5.914676] systemd[1]: Reached target Remote File Systems (Pre).
[    5.934061] EXT4-fs (mmcblk0p1): re-mounted. Opts: errors=remount-ro
[    5.955439] systemd[1]: Mounting POSIX Message Queue File System...
[    5.955869] systemd[1]: Listening on udev Kernel Socket.
[    5.956362] systemd[1]: Listening on udev Control Socket.
[    5.979968] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    6.005208] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    6.005383] systemd[1]: Reached target Remote File Systems.
[    6.009359] systemd[1]: Created slice system-serial\x2dgetty.slice.
[    6.012176] systemd[1]: Starting Set console keymap...
[    6.023000] systemd[1]: Reached target Swap.
[    6.030145] systemd[1]: Mounted POSIX Message Queue File System.
[    6.030397] systemd[1]: Mounted /sys/kernel/debug.
[    6.031947] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    6.033272] systemd[1]: Started Remount Root and Kernel File Systems.
[    6.034353] systemd[1]: Started Load Kernel Modules.
[    6.049333] systemd[1]: ureadahead.service: Main process exited, code=exited, status=5/NOTINSTALLED
[    6.053497] musb-hdrc musb-hdrc.1.auto: Babble
[    6.058017] musb-hdrc musb-hdrc.1.auto: Babble
[    6.062495] musb-hdrc: setup fifo_mode 4
[    6.062513] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    6.086234] systemd[1]: ureadahead.service: Unit entered failed state.
[    6.086584] systemd[1]: ureadahead.service: Failed with result 'exit-code'.
[    6.128322] systemd[1]: Started Nameserver information manager.
[    6.342225] systemd[1]: Started Journal Service.
[    6.403431] musb-hdrc musb-hdrc.1.auto: Babble
[    6.407948] musb-hdrc musb-hdrc.1.auto: Babble
[    6.412428] musb-hdrc: setup fifo_mode 4
[    6.412446] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    6.753452] musb-hdrc musb-hdrc.1.auto: Babble
[    6.757987] musb-hdrc musb-hdrc.1.auto: Babble
[    6.762468] musb-hdrc: setup fifo_mode 4
[    6.762485] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    7.103543] musb-hdrc musb-hdrc.1.auto: Babble
[    7.108068] musb-hdrc musb-hdrc.1.auto: Babble
[    7.112549] musb-hdrc: setup fifo_mode 4
[    7.112566] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    7.223022] systemd-journald[154]: Received request to flush runtime journal from PID 1
[    7.453510] musb-hdrc musb-hdrc.1.auto: Babble
[    7.458026] musb-hdrc musb-hdrc.1.auto: Babble
[    7.462505] musb-hdrc: setup fifo_mode 4
[    7.462523] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    7.803434] musb-hdrc musb-hdrc.1.auto: Babble
[    7.807950] musb-hdrc musb-hdrc.1.auto: Babble
[    7.812431] musb-hdrc: setup fifo_mode 4
[    7.812449] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    8.163440] musb-hdrc musb-hdrc.1.auto: Babble
[    8.167957] musb-hdrc musb-hdrc.1.auto: Babble
[    8.172436] musb-hdrc: setup fifo_mode 4
[    8.172453] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    8.513454] musb-hdrc musb-hdrc.1.auto: Babble
[    8.517987] musb-hdrc musb-hdrc.1.auto: Babble
[    8.522467] musb-hdrc: setup fifo_mode 4
[    8.522485] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    8.863441] musb-hdrc musb-hdrc.1.auto: Babble
[    8.867984] musb-hdrc musb-hdrc.1.auto: Babble
[    8.872466] musb-hdrc: setup fifo_mode 4
[    8.872484] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    9.213483] musb-hdrc musb-hdrc.1.auto: Babble
[    9.218013] musb-hdrc musb-hdrc.1.auto: Babble
[    9.222493] musb-hdrc: setup fifo_mode 4
[    9.222510] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    9.563472] musb-hdrc musb-hdrc.1.auto: Babble
[    9.567998] musb-hdrc musb-hdrc.1.auto: Babble
[    9.572480] musb-hdrc: setup fifo_mode 4
[    9.572499] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    9.762150] random: nonblocking pool is initialized
[    9.913445] musb-hdrc musb-hdrc.1.auto: Babble
[    9.917967] musb-hdrc musb-hdrc.1.auto: Babble
[    9.922449] musb-hdrc: setup fifo_mode 4
[    9.922467] musb-hdrc: 28/31 max ep, 16384/16384 memory
[   10.263463] musb-hdrc musb-hdrc.1.auto: Babble
[   10.268005] musb-hdrc musb-hdrc.1.auto: Babble
[   10.272488] musb-hdrc: setup fifo_mode 4
[   10.272505] musb-hdrc: 28/31 max ep, 16384/16384 memory
[   10.613431] musb-hdrc musb-hdrc.1.auto: Babble
[   10.617974] musb-hdrc musb-hdrc.1.auto: Babble
[   10.622456] musb-hdrc: setup fifo_mode 4
[   10.622474] musb-hdrc: 28/31 max ep, 16384/16384 memory
[   10.744447] using random self ethernet address
[   10.744468] using random host ethernet address
[   10.744481] using host ethernet address: C8:A0:30:C0:6F:CC
[   10.744489] using self ethernet address: C8:A0:30:C0:6F:CD
[   10.745268] usb0: HOST MAC c8:a0:30:c0:6f:cc
[   10.745333] usb0: MAC c8:a0:30:c0:6f:cd
[   10.745365] using random self ethernet address
[   10.745374] using random host ethernet address
[   10.745451] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
[   10.745461] g_ether gadget: g_ether ready
[   10.963450] musb-hdrc musb-hdrc.1.auto: Babble
[   10.967989] musb-hdrc musb-hdrc.1.auto: Babble
[   10.972472] musb-hdrc: setup fifo_mode 4
[   10.972491] musb-hdrc: 28/31 max ep, 16384/16384 memory
[   11.147370] g_ether gadget: high-speed config #1: CDC Ethernet (ECM)
[   11.313446] musb-hdrc musb-hdrc.1.auto: Babble
[   11.317964] musb-hdrc musb-hdrc.1.auto: Babble
[   11.322443] musb-hdrc: setup fifo_mode 4
[   11.322461] musb-hdrc: 28/31 max ep, 16384/16384 memory
[   11.663452] musb-hdrc musb-hdrc.1.auto: Babble
[   11.667989] musb-hdrc musb-hdrc.1.auto: Babble
[   11.672469] musb-hdrc: setup fifo_mode 4
[   11.672487] musb-hdrc: 28/31 max ep, 16384/16384 memory
[   12.013453] musb-hdrc musb-hdrc.1.auto: Babble
[   12.017978] musb-hdrc musb-hdrc.1.auto: Babble
[   12.022459] musb-hdrc: setup fifo_mode 4
[   12.022476] musb-hdrc: 28/31 max ep, 16384/16384 memory
[   12.432454] usb 1-1: new full-speed USB device number 27 using musb-hdrc
[   12.575645] usb 1-1: New USB device found, idVendor=046d, idProduct=c52b
[   12.575667] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   12.575677] usb 1-1: Product: USB Receiver
[   12.575685] usb 1-1: Manufacturer: Logitech
[   12.592929] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-musb-hdrc.1.auto-1/input2
[   12.726973] input: Logitech M570 as /devices/platform/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1:1.2/0003:046D:C52B.0003/0003:046D:1028.0004/input/input1
[   12.727667] logitech-hidpp-device 0003:046D:1028.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech M570] on usb-musb-hdrc.1.auto-1:1
[   12.738482] input: Logitech K230 as /devices/platform/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1:1.2/0003:046D:C52B.0003/0003:046D:400D.0005/input/input2
[   12.738761] logitech-hidpp-device 0003:046D:400D.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech K230] on usb-musb-hdrc.1.auto-1:2
[   14.553908] omap_rng 48310000.rng: OMAP Random Number Generator ver. 20
[   14.614094] davinci-mcasp 48038000.mcasp: invalid tdm slots: 0
[   14.742779] davinci-mcasp 4803c000.mcasp: invalid tdm slots: 0
[   14.815973] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
[   14.836589] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
[   14.836620] omap-sham 53100000.sham: initialization failed.
[   14.842255] omap-sham: probe of 53100000.sham failed with error -22
[   16.251257] ip_tables: (C) 2000-2006 Netfilter Core Team
[   16.356148] nf_conntrack version 0.5.0 (7930 buckets, 31720 max)
[   16.748672] net eth0: initializing cpsw version 1.12 (0)
[   16.751011] net eth0: phy found : id is : 0x7c0f1
[   16.751084] libphy: PHY 4a101000.mdio:01 not found
[   16.755986] net eth0: phy 4a101000.mdio:01 not found on slave 1
[   16.799804] net eth0: BQL enabled
[   16.814825] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   20.602410] tilcdc 4830e000.lcdc: timeout waiting for framedone
[  113.684201] g_ether gadget: high-speed config #1: CDC Ethernet (ECM)

The following line might indicate something strange:

[ 3.357472] bone_capemgr bone_capemgr: Invalid signature 'ffffffff' at slot 0

But I can't tell if that's the issue or not.

I've also tried to flash the eeprom manually by running the check_am335x_eeprom from Kamikaze's shell functions to no avail.

Any pointers?

fcorrea commented 5 years ago

Ok, finally was able to manually reflash the eeprom and it is working now.