This is a bash script I've put a lot of love into to avoid libvirt guest definitions with hardcoded PCI paths among other virtualization testing which it also helps make very quick for me.
It starts a VM by calling qemu-system-x86_64 directly but can automatically handle a bunch of additional optional arguments with the convenience of a terminal with command history. The aim of this script is to make changing how the geust starts up as simple as backspacing something out of the command. Particularly a focus on PCIe devices.
This script makes Windows VM gaming a pinch on my single NVIDIA gpu configuration and also some of my older dual-gpu machines which can take advantage of Looking Glass.
Now if only NVIDIA would officially support vGPUs on their consumer hardware.
On the surface it's just a qemu wrapper but the magic is in the additional optional arguments it can handle. With these features I swear by it for any VFIO or general virtualization tinkering (kernel testing, physical disk booting, etc).
It:
Gives a clear rundown of everything it has been asked to do and by default in a 'Dry' mode to avoid wreaking havoc without saying go first. (-run)
Provides the exact QEMU arguments it intends to launch with in case you want to dive into QEMU manually by hand or use the arguments for something else.
Safely warns or fails if a critical environment disrepency is detected such as VT-d/IOMMU not being enabled in the bios, or boot flags. Among other environment catches before running itself into a wall.
Takes an optional regular expression of PCI and USB devices to pass to the VM when starting it.
-PCI 'NVIDIA|USB' to give it my graphics card with all host USB controllers on m single-gpu host.Takes as many virtual disks or iso's as you want to pass in with a QEMU iothread for each virtual disk.
You could save some overhead over using virtual disks by passing in an entire NVMe/HBA/SATA controller with -PCI 'SATA' assuming your host isn't booted via the same controller.
Otherwise it also accepts more specific device details such as the PCI device path, model and other discernable features from lspci -D if you only want to passthrough speicifc devices: -PCI 0000:06:00.0, -PCI MegaRAID, -PCI abcd:1234.
Automatically unbinds all specified PCI devices from their driver's onto vfio-pci if they're not already on it.\ (No need for early host driver blocking or early PCI device vfio binding)
Automatically rebinds all specified PCI devices back to their originating driver on guest shutdown\ (When applicable)
Can automatically kill the display-manager for a guest to use if it detects the GPU is stuck unbinding\ (Commonly unavoidable in single GPU graphical desktop scenarios)\ But also rebinds the card back to its driver on guest exit and restarts the DM back to the login screen. Almost seamless...
Can make network bridges automatically or attaches the VM to an existing bridge with a tap adapter if specified\ giving your VM a true Layer 2 network presence on your LAN with direct exposure for RDP, SSH, and all.\ (Useful to avoid the default "One way trip" nat adapter)
Can describe your host's IOMMU groups and CPU thread pairings per core to aid with vcpu pinning (And isolation planning).
-iommugroups and -cputhreadsCan take optional vcpu pinning arguments to help avoid stutter due to clashing host and guest cpu activity.
systemctl set-property --runtime slice management doesn't take care of IRQ and other isolation performance tweaks I'd like to manage in realtime. But might be enough for desktop use-cases. For now, I've provided some powerful cpu isolation boot argument examples below. Sorry!Can dynamically allocate hugepages for the VM on the fly if host memory isn't too fragmented. Otherwise if pre-allocated and enough free it will notice existing hugepages and use them.
Optionally enables Looking Glass support if you have a second d/iGPU on the host to continue graphically while the guest runs.
Can take a romfile argument for any GPU devices being passed through if needed for your setup.
Optionally includes key hyperv enlightenments for Windows guest performance.
And many more little bits and pieces! (-help)
This script has been designed on and for Archlinux however is mostly generic and the tools it relies on can be added to any system with whichever package manager is supplied. It will work just fine on any distro shipping a modern kernel and qemu binary. At worst some distros may store OVMF_CODE.fd elsewhere and its path will have to be specified with the -bios argument - I'll likely add add an array of well-known locations later so those on other distros don't have to specify that.
I've also confirmed that this works on Ubuntu 20.04 and 18.04 as well - But again, it'll work on anything shipping modern kernel and qemu versions. For PCIe passthrough specifically the host will need to support either Intel's VT-d or AMD-Vi (May just be labelled IOMMU in its bios). These features are well aged so even my older PC ~2011 PC can run this script and do PCIe passthrough just fine albeit at a slower performance than the hardware of today. Just don't forget to add the relevant AMD or Intel VFIO arguments to your kernel's boot arguments.
Even my partially retired desktop from 2011 (i7-3930K, ASUS SABERTOOTH X79, 2x16GB DDR3, 2x SATA SSDs mirrored) can run this script with the two older NVIDIA GPUs in it with a Looking Glass client window on its desktop to the guest.
My 2020 PC (3900x, DDR4@3600, single 2080Ti, dedicated M.2 NVMe for the guest) has no trouble playing games such as Overwatch, MK11 Multiplayer and Battlefield One/3/4/2042 in a fully seamless experience. The VM feels like a real computer (without checking Device Manager and seeing virtual hardware). There's no stutters or telltale signs that its not a real computer nor under heavy load when vcpu pinning and host core isolation are done correctly. The dedicated NVMe for PCIe passthrough for booting the guest has been the most impactful piece of the puzzle in my experience. Disk IO latency is more than half the battle.
The primary motivation is that its for fun. I love my field and the 'edutainment' I take in from this profession fuels the fire. WINE (Proton, etc) continue to improve and there's only so many titles which can't be played right in Linux anymore but for some good reasons to make this:
Primarily with this solution I see many tutorials copy pasting scripts and other libvirtd hooks hardcoding PCIe addresses and performing either redundant or potentially dangerous 'catch all' actions blindly. This script lets me avoid this "set and forget" attitude which helps prevent poor decisions such as blacklisting entire graphics drivers on a system which I see often soft-brick users computers, or hardcoding PCIe addresses in libvirtd which which often leads to a 'broken' (Must be reconfigured) libvirtd guest when another PCIe device gets plugged in overnight or a bios update shifts everything.
I figured I'd write my own all-in-one here to help make modifying what hardware a guest receives as easy as typing a few extra words into the command invocation. Or backspacing them. All with the convenience of the up arrow in my shell history.
In general this script has been very useful in my tinkering even outside VFIO and gaming. At this point I swear by it for quick and easy screwing around with QEMU just on the desktop. Especially for booting external drives or USB sticks in just a few keystrokes.
-avoidVirtio / -noVirtio
If set, tries to pick more traditional QEMU devices for the best compatibility with a booting guest. Likely to be useful during new Windows installs if you don't have the virtio iso to pass in with the installer iso. Also useful in other departments such as testing kernels and initramfs combinations where virtio isn't a kernel inbuilt or initramfs as a late module.
-iommu / -iommugroups / -iommugrouping
Prints IOMMU groupings if available then exists.
-cputhreads / -showpairs / -showthreads / -showcpu
Prints host core count and shares which threads belong to which core Useful knowledge for setting up isolation in kernel arguments and when pinning the guest with -pinvcpus
-ignorevtcon / -ignoreframebuffer / -leavefb / -leaveframebuffer / leavevtcon
Intentionally leave the vtcon and efi-framebuffer bindings alone
Primarily added to work around kernel bug 216475
Prevents restoring vtcon's at a cost of as many GPU swaps from host to guest as desired.
-image /dev/zvol/zpoolName/windows -imageformat raw
If set, attaches a flatfile, partition, whole-disk or zvol to the VM with QEMU's -drive parameter. -imageformat is optional for virtual disks and will apply to the most recent -image argument specified. -imageformat must be specified for raw storage to prevent QEMU from activating a safety feature. -image and -imageformat can be used multiple times to add more disks.
-nvme
Present storage to the guest virtualizing NVMe rather than using virtio-blk-pci or ide-hd (with -avoidVirtio).
This can prove useful when booting a physical installation on NVMe which lacks other storage drivers in their bootloader and general permanent P2V scenarios. For long term usage I strongly recommend installing the virtio driver on the guest instead.
-iso /path/to/a/diskimage.iso
If set, attaches an ISO to QEMU with an incrementing index id. Can be specified as many times needed for multiple CDs. Good for liveCDs or installing an OS with an optional driver-cd.
-bridge br0, -tap tap5, '-hostint enp1s0'
Specify a bridge interface to attach the VM to automatically with a new tap interface.
Optionally include a host interface for creating a new bridge on the fly.
Optionally specify a custom tap interface name to use. It will be created automatically or an existing tap can be used if already pre-configured.
At a minimum either -bridge with an existing bridge to attach to or -tap need to be specified for these advanced networking options. To create an entirely new bridge from scratch all three arguments must be provided.
If only -tap tapX is provided the interface will be created if needed and the VM will be attached to that only. This implies the host machine will need to configure an IP on tapX to communicate with the guest.
The script checks for existing interfaces and their status for managing the guest's networking during the run and will stop and restore NetworkManager to manage the bridge. It also employs a custom guest MAC Address generator based off the host hardware for easy layer 2 recognition
If these three networking arguments aren't specified the default QEMU NAT adapter will be used. (NAT may be desirable for some setups)
-memory 8192M / -m 8G / -mem 8G
Set how much memory the VM gets for this run. Argument assumes megabytes unless you explicitly use a suffix like K, M, or G. If this argument isn't specified the default value is HALF of the host total.
-hugepages / -huge / -hugepages /optional/mountpoint/to/custom/hugepage
Tries to allocate hugepages for the VM dynamically based on how much memory it will be given (defined with -memory). Hugepages for a VM with frequent random memory access such as in gaming can be much snappier than your regular process accessing regular memory. If no argument is given it'll use /dev/hugepages which is often 2MB per page. The script drops host memory cache and then runs compact_memory before allocating with the aim of less fragmentation in hugepages. Using this argument will also clean up after itself by setting pages back to 0, reclaiming memory for the host. But only if it wasn't already preallocated before running the script.
This flag also supports preallocation, so if you reserved some 1GB pages at boot time and mounted a pagesize=1G hugetlbfs to some directory, specifying that will skip the dynamic hugepgae allocation step above if there's enough free for the VM to use. Allocating hugepages at boot time sacrifices a lot of memory but doing it so early prevents fragmentation. Can be a lifesaver for performance.
-hyperv
Enable hyper-v enlightenments for nested virtualization. For some cases this may help convince more invasive Anti-cheats to play along. You will need to enable (tick) the HyperV Windows Feature and reboot when it asks before this will work though.
-hostaudio
Try to use the host's audio server for guest audio and also tries to start it.
-cmdline / -append & -initrd / -initramfs & -kernel / -k
Optionally pass a kernel file either self compiled or straight out of /boot to tinker with. Pass useful arguments to it with -cmdline such as console=ttyS0 and root=/dev/vda1. -initrd typically only required if kernel image built without relevant drivers or if there's licensing issues.
-quiet / -q/ -silence / -s
Try to be quiet, only printing any errors we run into. Useful after your 1786th run.
-bios '/path/to/that.fd'
An optional bios path. If not set the script will try /usr/share/ovmf/x64/OVMF_CODE.fd if available.
-noBios / -legacy / -legacyboot
Skip adding a pflash device for UEFI booting. This will boot in qemu's default BIOS mode instead of UEFI.
-biosvars /tmp/OVMF_VARS.4m.fd
Manually specify a bios variables file for qemu to use. Needed for Secureboot / Win11.
You must copy the default OVMF_VARS.fd on your system to a new unique path for your VM OS.
-usb 'AT2020USB|SteelSeries|Ducky|Xbox|1425:5769'
If set, the script enumerates lsusb with this regex and generates QEMU arguments for passing them through when the VM starts.
This example would catch any:
Audio-Techinica AT2020 (USB Microphone+headphone DAC)
SteelSeries mouse,
Xbox Controllers,
Ducky brand keyboard.
A USB device with ID 1425:5769, whatever that may be.
-pci 'Realtek|NVIDIA|10ec:8168'
If set, the script enumerates lspci for the set regex and generates qemu arguments as it does for -usb. In -run mode, it also unbinds them from their current drivers (If any) and binds them to vfio-pci.
It remembers what they were bound to beforehand for rebinding once the VM shuts down.
This example would catch any:
PCI devices by Realtek
NVIDIA cards (Including children of the GPU like the audio card and USB-C controller)
A PCI device with ID 10ec:8168.
-pinvcpus 0,1,2,3,4,5 / -pinvcpus 0,2,4,8
The taskset argument will take the threads you give it and only lets the VM execute on those threads. It also creates only that many threads on the VM. (6 and 4 in the examples respectively) This can significantly reduce latency if the guestis having trouble, even if you haven't configured any host pinning.
-portforward tcp:2222:22 + -portforward tcp:33389:3389
A flag accepting a colon delimited argument in the format of protocol,hostport,guestport for guest portforwarding.
Can be specified multiple times.
Only applicable with default user-mode NAT networking (Pointless when bridging)
-colortest
A quick terminal color test then exits.
-looking-glass / -lookingglass / -lg
Adds a 64MB shared memory module for the Looking Glass project and a spice server onto the guest for input from host during Looking Glass usage. You will still need to go into your VM add the VirtIO IVSHMEM driver to the "PCI standard RAM Controller" which appears in Device Manager under System Devices before Looking Glass will function.
-romfile / -vbios /path/to/vbios.bin
Accepts a file path to a rom file to use on any detected GPU during -pci argument processing.
Some host configurations will need this even with a modern GPU. Older NVIDIA gpus need this too if not isolated from boot time.
If you're on a single-dGPU host passthrough to a guest on an older NVIDIA card, you will likely require this. If you experience "black screen" issues on guest startup it's often a problem solvable with a vbios. My 2080Ti has days where it can just fire up in a guest and others where it needs a vbios to light up the screen during passthrough. Probably bios setting dependant in my case.
If you're going to use a vbios dump, you should confirm it's safe before using it on a GPU the rom-parser github project is good to check this. Otherwise you can usually just find a preexisting dump for your model's vbios on TechPowerup and patch it with say, NVIDIA-vBIOS-VFIO-Patcher.
-extras '-device xyz -device abc -device ac97 -display gtk -curses'
If set adds extra arbitrary commands to the cmdline of QEMU (Once invoked)
Useful for -device ac97 to get some quick and easy audio support if the host is running pulseaudio.
-secureboot
Try to search for the secboot version of your system's OVMF_CODE for VM usage.
You must also provide -biosvars for your secureboot-enabled VM to use.
-tpm
Start swtpm and have qemu use that for the guest's TPM needs (Added primarily for Win11 support)
-win11
Automatically enables -tpm and -secureboot.
-run
Actually run. The script runs dry by default and outputs QEMU arguments and environment information without this flag. Especially useful for testing PCI regexes without unbinding things first try, but good for general safety.
DISPLAY='' or unset the varible the script will only attach a serial console. This is useful for Linux guests which can take the kernel argument console=ttyS0 allowing you to interact with the guest through qemu's serial console right in the terminal.-image and/or -iso arguments with OVMF installed. You can install an OS and include any driver ISOs you may need during the installation.-bridge-nonet you'll want to install the VirtIO drivers into the guest before expecting virtual-networking to work.
If you can't use virtio drivers for whatever reason, you can specify -noVirtio, at the cost of performance.-pinvcpus to cherry pick some host cpu threads for the guest to execute on and this will also set the VM's vcpu count appropriately to match.
This is very useful if the host produces enough load to cause stuttering in the guest during normal operation.
If your host doesn't have the cpu load headroom for a gaming guest or the guest experiences stuttering consider using -pinvcpus and isolateing the cores you pick for the guest.If you're "feeling lucky" (Have prepared accordingly) you can start the script with your GPU, some usb input device such as your keyboard, an installer ISO and an optional vbios and install everything in one take.
Try to include the virtio ISO aiming use virtio hardware instead of setting -noVirtio. VirtIO devices perform much better than emulating traditional real hardware and networking is as fast as the host can facilitate, often >10Gbe where the CPU can push for it. This script creates an ioThread for the guest's disk when using virtio.
Otherwise feel free to start the script just specifying your -iso of choice with QEMU's default virtual GPU which will pop up a window to get started with. Once you've installed everything you need you can shut the guest down and try GPU passthrough with some peripherals.
If you've already isolated a GPU for the guest (Explicitly isolated from boot, often also involves telling the bios which GPU to use/ignore) or have a patched vbios ready to specify with -vbios so the guest can re-initialize the card for itself then you too can start the install process with the card included from install. You'll want to passthrough at least a keyboard with -usb, or you can specify 'USB' in the -PCI argument regex to capture ALL of your hosts USB card inputs with your GPU too. Passing through entire USB/SATA/NVME controllers is ideal; much better performance than having the guest access the same devices through virtual hardware.
*Don't want to use virtio drivers for your guest or can't fetch the ISO? You can launch this script with -novirtio to use legacy devices like e1000e for networking which should be compatible with most barebones OSes
Get the latest Win ISO you wish to install from Microsoft's site here
Create storage for your VM; It has to live somewhere. Example commands below.
QEMU-img create -f qcow2 myWin10VM.qcow2 100G # A classic sparse qcow2
dd if=/dev/zero of=myvm.img bs=1G count=100 # A preallocated raw example with DD, will probably perform better if you're not on a QoW Filesystem
zfs create -V100G myPool/myVMDisk # zfs backed virtual block-device (ZVOL), doesn't perform as well as I'd like but very tidy
Start the script following something like the below example:
./main -image /dev/zvol/myPool/myVMDisk -imageformat raw -iso /tmp/Win10_20H2_v2_English_x64.iso -iso /nas/common/ISOs/virtio-win-0.1.189.iso
./main -image /dev/zvol/myPool/myVMDisk -imageformat raw -iso /tmp/Win10_20H2_v2_English_x64.iso -novirtioqemu-img create -f raw /tmp/win.qcow2 50G
~/vfio/main -mem 12G -image /tmp/win.qcow2 -imageformat qcow2 -bridge tap0,br0,eth0 -pci 'NVIDIA|USB' -pinvcpus 0,12,1,13,2,14,3,15 -ignorevtcon -runEventually windows will ask you to partition disks, if you're using VIRTIO (default) then you'll need to install the storage driver here before it'll see its disk.
If you used -novirtio there should be no issue continuing over classic IDE.
Once at the VM's desktop:
If you passed your GPU in from the beginning you're set, go ahead and install the official drivers for your card, do your updates and grab Steam or something.
If you haven't passed your card in yet, you can shutdown the VM and pass it in now. As a Plan B for Win guests you can do your Windows Updates so it knows to grab the driver and initialize the card. In case something else goes wrong.
It's worth going through Device Manager for any missing drivers. If you used virtio the iso will likely take care of them shortly if you don't click in and specify.
If you're on a NVIDIA card including 2000,3000 and 4000 generations but are experiencing a blank screen or monitors just going into standby at VM boot, ensure you have isolated correctly, or if you already know your GPU isn't isolated then consider using a patched VBIOS file so the guest can just reinitialize the card itself.
If your guest has the NVIDIA driver installed, you may find your screen starts black (And you visually miss the TianoCore UEFI boot process) but eventually gets a video signal once the guest reaches the login screen and the NVIDIA driver kicks in to resuscitate the card itself. This isn't ideal but it can also save the day like that.
For best VM performance in any scenario:
If you're virtualizing Windows, you can pass -hyperv to enable some HyperV enlightenments courtesy of QEMU.
Consider hugepages (-hugepages) with your -memory argument. If your host memory is too fragmented for them to allocate on the fly, consider using hugepagesz=1G and hugepages=12 in your kernel boot arguments; replacing '12' with the number of GB you wish to reserve for your VM. Don't forget to specify all of it with -m xG -hugepages when starting your VM.
If you opted out of virtio devices with -novirtio and this isn't just a testbed; consider installing the drivers and using virtio devices. The virtual network interface alone is capable of 10Gbps which likely isn't your LAN speed, but means the host<>guest communication will be as fast as the CPU can deliver. This could be useful things such as reading a Steam library from the host over NFS, fast host to guest network shares in general and other cases for example if somebody wanted to use projects such as Steam's Streaming option or software such as Parsec, both of which would love a large low latency pipe to speak through.
Pinning the vcpus of your guest to cpu threads of your host. QEMU spawns a child vcpu thread for each cpu you give it. They act as the actual "cpu" threads of your guest OS. You can check -cputhreads and use -pinvcpus to pin host cores to your guest. Pinning QEMU vcpu threads avoids it getting thrown about at the mercy of your host scheduler and can help significantly, especially on single GPU scenarios where your host load is negligible.
Isolating the cores on the host that you pinned the guest to. I use the below to squeeze every last drop of low latency responsiveness on my VM:
isolcpus=thread,range,to-isolate # Tell the kernel to not schedule work onto these, as they will be the ones we pin QEMU to
nohz_full=thread,range,to-isolate # Tell the kernel to NOT send timer ticks to these cores, their only job will be QEMU so no need to check in. "Adaptive Ticks"
rcu_nocbs=thread,range,to-isolate # Tell the kernel to handle RCU callbacks for these on any other CPU but themselves.
rqaffinity=remaining,host,threads # Use these remaining host cores to handle all host IRQ/RCU
rcu_nocb_poll # Enforce the above by polling only ever so often rather than having cores handle it themselves
systemd.unified_cgroup_hierarchy=0 # Enables systemd v1 cgroupsPassing in a real disk to your guest to boot from like a dedicated NVMe controller with the -pci argument will always perform much better than any QEMU virtual disk method. Even though this script creates an iothread per guest disk you can't do better than raw controller passthrough. Especially NVMe.
The next closest contender would be a raw partition on the host passed as a virtio disk. Then next up: A raw image file on a lightweight host FS such as ext4 (with a goal of minimizing overhead).
Informing Xorg via xorg.conf (or a .d/file.conf) to ignore other GPUs on your system is a good way to keep your second GPU on the driver (So it can still be used for CUDA operations) while allowing it to be unbound from the driver on the fly for a guest to use without killing your host's graphical session.
Isolating the second card like this allows your second card to stick around for CUDA-powered computations on the host and if there's no other processes other than Xorg using your guest card, you can unbind it for vfio-pci usage at any time without hanging (Waiting for processes to exit)
Naturally, this is only applicable in scenarios where you have a second GPU. Single GPU passthrough users only have the one card to draw to, which means X needs to be stopped before the guest can have that card. Sorry. However, if you aren't running anything graphically intensive, you could use XPRA on your host and run your programs through that. Then re-attach to it when you make it back to the host graphically. Or even better, you could attach to XPRA from inside the guest and continue accessing your host applications from inside the guest.
This can be put right into /etc/X11/xorg.conf but be sure to replace any existing Device declarations you have so that X doesn't error. -- Some distros
Section "ServerFlags"
# Do not scan for GPUs
Option "AutoAddGPU" "0"
Option "AutoBindGPU" "0"
# It's OK to scan and add peripherals however.
Option "AutoAddDevices" "1"
Option "AutoEnableDevices" "1"
EndSection
# Define the host GPU here, no others
Section "Device"
Identifier "Device0"
# Pick the right driver for your host GPU vendor.
Driver "nvidia"
# And the correct bus ID (lspci -D)
BusID "PCI:1:0:0"
# Do not probe for others.
Option "ProbeAllGpus" "0"
EndSectionHere's a quick and dirty one-liner which this VFIO script also uses to check what processes are using a GPU. Just substitute the path with the PCI address of your guest-intended GPU:
xrandr --listproviders will reveal how many GPUs it thinks it's allowed to use in your Graphical Session. This honors your xorg.conf.ps $(fuser /dev/dri/by-path/pci-0000:03:00.0* 2>/dev/null) will reveal exactly which processes are using a GPU no matter what. Any that aren't following your xorg.conf will be listed here too. The script uses this for killing when required. Don't forget to replace this example pci-0000:03:00.0 with the PCI path of the GPU you wish to check.I've spent plenty of time going over every relevant flag to try and demystify why xorg.conf isolation is so inconsistent so this README.md can be a good VFIO general reference but in my experience even with a perfect gpu-isolating xorg.conf, some Window Managers still spawn processes which latch onto the card I just tried to isolate.
I use Cinnamon and Xfce4. It turns out Cinnamon spawns xdg-desktop-portal-gnome (I assume nay Gnome-based WM will) and Xfce4 spawns xdg-desktop-portal both of which latch onto the second GPU despite being isolated in xorg.conf.
This is really annoying, but is easily thwarted by simply kill/pkill'ing those processes. In the case of both Window Managers, I was able to kill those portal processes and my graphical session continued to function just fine. But also, my second GPU could be unbound and used for VFIO without killing my graphical session.
Armed with this knowledge, the script now supports xorg.conf isolation and will try to unbind a card without killing X first, only resorting to killing it in a last resort scenario / flag.
For general guest GPU pre-prep or if you're desperate to not kill your existing Xorg session; there's many ways to prepare, though the methods available drastically change depending on your use case.
This is the best case scenario to deal with easiest scenario to deal with as you can simply bind vfio-pci at boot time by adding vfio-pci.ids= to your host's kernel arguments. This will bind the guest card to vfio-pci immediately and to undo it you can either remove that kernel argument and reboot or manually unbind your gust GPU from vfio-pci and bind it back onto the vendor GPU driver.
As long as you aren't locking your guest's card into an Xorg session, you can let this vfio script dynamically unbind your guest card from the nvidia/radeon/amdgpu driver on the fly. Just make sure you aren't using the GPU elsewhere such as a CUDA operation or other gpu-accelerated CLI task.
This ends up being a similar case as #2, as you cannot target your guest's card using vfio-pci.ids because that will catch your host's GPU as well. You can use the same xorg.conf isolation method to tell X to only use your primary GPU by targeting its PCI address. This script will automatically unbind your second GPU of the same model if it is not in use by anything else.
Note: -run is omitted for obvious reasons.
If you aren't ready to do any passthrough and just want to start the VM in a regular window (Installation, Drivers, etc.):
./main -image /root/windows.img -imageformat raw -iso /tmp/Installer.iso
If a host has been booted with isolated cores you can tell the script to pin the guest to those only:
./main -image /root/windows.img -imageformat raw -pinvcpus 0,1,2,3,4,5
This example starts the VM with only host threads 0 to 5 (The first 3 cores on some multi-threaded hosts, check -cputhreads to see your true host thread to core topology) Useful if a VM experiences stuttering from host load.
An example run with passthrough could look like:
./main -image /dev/zvol/poolName/windows,format=raw -bridge tap0,br0,eth0 -usb 'SteelSeries|Audio-Technica|Holtek|Xbox' -pci 'NVIDIA'
This example would (if seen) pass all regex-matching USB and PCI devices and rebind the PCI devices if applicable. It would also provision network bridge br0 and attach tap0 to the bridge with your host interface. Then give tap0 to the VM.
An advanced example giving a guest 8G of memory and booting the host's kernel with arguments to boot from the first partition of a provided virtual disk. Includes an initramfs for the ext4 driver, which will be needed to read the ext4 rootfs partition of the virtua disk provided. Also doesn't use VirtIO becuase nor the kernel or initramfs have the virtio_scsi driver as a built-in:
./main -m 8G -kernel /boot/vmlinuz-linux -append 'root=/dev/sda1 rw ' -initramfs /boot/initramfs-linux.img -image /zfstmp/kernelbuild/test.ext4.qcow2 -imageformat qcow2 -novirtio -run